diff --git a/EasyLoRaWANGateway/loraFiles.h b/EasyLoRaWANGateway/loraFiles.h
deleted file mode 100644
index af7d6c3..0000000
--- a/EasyLoRaWANGateway/loraFiles.h
+++ /dev/null
@@ -1,138 +0,0 @@
-// 1-channel LoRa Gateway for ESP8266 and ESP32
-// Copyright (c) 2016-2020 Maarten Westenberg version for ESP mcu's
-//
-// 	based on work done by Thomas Telkamp for Raspberry PI 1ch gateway
-//	and many others.
-//
-// All rights reserved. This program and the accompanying materials
-// are made available under the terms of the MIT License
-// which accompanies this distribution, and is available at
-// https://opensource.org/licenses/mit-license.php
-//
-// NO WARRANTY OF ANY KIND IS PROVIDED
-//
-// Author: Maarten Westenberg (mw12554@hotmail.com)
-//
-// This file contains a number of compile-time settings that can be set on (=1) or off (=0)
-// The disadvantage of compile time is minor compared to the memory gain of not having
-// too much code compiled and loaded on your ESP8266.
-//
-// ----------------------------------------------------------------------------------------
-
-// This file describes the includes necessary for ESP Filesystem.
-// At this moment there is only one record written to the ESP8266
-// filesystem. We can add more info, which makes the gateway even more usable,
-// however for large data we should only append to the existing file used.
-// This also means we'll have to check for available space so we won't run out of 
-// storage space to quickly.
-// One way would be to use let's say 10 files of each 10000 lines and when full
-// delete the first file and start writing on a new one (for example)
-
-
-
-//
-// Define Pattern debug settings, this allows debugging per
-// module rather than per level. See also pdebug.
-//
-// P_SCAN statemachine
-// P_CAD
-// P_RX received actions only
-// P_TX transmissions
-// P_MAIN for main program setup() and loop()
-// P_GUI for www server GUI related
-// P_PRE for statemachine
-// P_RADIO; For code in _loraModem and _sensor
-#define P_SCAN		0x01
-#define P_CAD		0x02
-#define P_RX		0x04
-#define P_TX		0x08
-#define P_PRE		0x10
-#define P_MAIN		0x20
-#define P_GUI		0x40
-#define P_RADIO		0x80
-
-
-// Definition of the configuration record that is read at startup and written
-// when settings are changed.
-
-struct espGwayConfig {
-
-	int32_t txDelay;			// Init 0 at setup
-	uint32_t ntpErrTime;		// Record the time of the last NTP error
-
-	uint16_t fcnt;				// =0 as init value	XXX Could be 32 bit in size
-	uint16_t boots;				// Number of restarts made by the gateway after reset
-	uint16_t resets;			// Number of statistics resets
-	uint16_t views;				// Number of sendWebPage() calls
-	uint16_t wifis;				// Number of WiFi Setups
-	uint16_t reents;			// Number of re-entrant interrupt handler calls
-	uint16_t ntps;
-	uint16_t logFileRec;		// Logging File Record number
-	uint16_t logFileNo;			// Logging File Number
-	uint16_t logFileNum;		// Number of log files max
-	uint16_t formatCntr;		// Count the number of formats
-
-	uint16_t ntpErr;			// Number of UTP requests that failed
-	uint16_t waitErr;			// Number of times the loraWait() call failed
-	uint16_t waitOk;			// Number of times the loraWait() call success
-	
-	uint8_t ch;					// index to freqs array, freqs[gwayCofnig.ch]=868100000 default
-	uint8_t sf;					// range from SF7 to SF12
-	uint8_t debug;				// range 0 to 4
-	uint8_t pdebug;				// pattern debug, 
-	uint8_t trusted;			// pattern debug,
-	
-	bool cad;					// is CAD enabled?
-	bool hop;					// Is HOP enabled (Note: default be disabled)
-	bool isNode;				// Is gateway node enabled
-	bool refresh;				// Is WWW browser refresh enabled
-	bool seen;
-	bool expert;
-	bool monitor;
-	bool dusbStat;				// Status of _DUSB
-	
-} gwayConfig;
-
-// Define a log record to be written to the log file
-// Keep logfiles SHORT in name! to save memory
-#if _STAT_LOG == 1
-
-// We do keep admin of logfiles by number
-// 
-//uint32_t logFileNo = 0;		// Included in struct espGwayConfig LogFile number
-//uint32_t logFileRec = 0;		// Number of records in a single logfile
-//uint32_t logFileNum = 1;		// Number of log files
-#define LOGFILEMAX 10
-#define LOGFILEREC 100
-
-#endif // _STAT_LOG
-
-// Define the node list structure
-//
-#define nSF6	0x01
-#define nSF7	0x02
-#define nSF8	0x04
-#define nSF9	0x08
-#define nSF10	0x10
-#define nSF11	0x20
-#define nSF12	0x40
-#define nFSK	0x80
-
-// define the Seen functon as when we have seen seen nodes last time
-struct nodeSeen {
-	time_t timSeen;
-	uint32_t idSeen;
-	uint32_t cntSeen;
-	uint8_t chnSeen;
-	uint8_t sfSeen;				// Encode the SF seen.This might differ per message!
-};
-struct nodeSeen listSeen[_MAXSEEN];
-
-
-// define the logging structure used for printout of error and warning messages
-// We use a string for these lines (only time) as it is convenient.
-struct moniLine {
-	String txt;
-};
-struct moniLine monitor[_MAXMONITOR];
-