diff --git a/EasyLoRaWANGateway/oLED.h b/EasyLoRaWANGateway/oLED.h
deleted file mode 100644
index 54803a1..0000000
--- a/EasyLoRaWANGateway/oLED.h
+++ /dev/null
@@ -1,72 +0,0 @@
-// 1-channel LoRa Gateway for ESP8266 and ESP32
-// Copyright (c) 2016-2020 Maarten Westenberg version for ESP8266
-//
-// based on work done by Thomas Telkamp for Raspberry PI 1ch gateway
-// and many others.
-//
-// All rights reserved. This program and the accompanying materials
-// are made available under the terms of the MIT License
-// which accompanies this distribution, and is available at
-// https://opensource.org/licenses/mit-license.php
-//
-// NO WARRANTY OF ANY KIND IS PROVIDED
-//
-// Author: Maarten Westenberg (mw12554@hotmail.com)
-//
-// This file contains a number of compile-time settings and definitions for Oled support.
-//
-// ----------------------------------------------------------------------------------------
-
-// OLEDs supported by this program must be I2C.
-// This is because we do not want any disturbance in the SPI area
-// which is also interfacing the LORA tranceiver.
-//
-// The following OLEDs are supported:
-// 0. No OLED connected
-// 1. 0.9" OLED (cheap)
-// 2. 1.3" OLED with much better and larger display
-// 4. TTGO board
-
-#if _OLED>=1										// If OLED is used
-
-// ----------------------------------------------------------------------------------------
-// Define the different PIN's used for SCL/SDA for each arch.
-//
-#if _PIN_OUT==1									// HALLARD
-#define OLED_SCL 5								// GPIO5 / D1
-#define OLED_SDA 4								// GPIO4 / D2
-
-#elif _PIN_OUT==2								// COMRESULT				
-#define OLED_SCL 0								// GPIO0 / D3
-#define OLED_SDA 2								// GPIO2 / D4
-
-#elif _PIN_OUT==4								// TTGO (onboard version used, also for DIY)
-#define OLED_SCL 15								// GPIO15 / 
-#define OLED_SDA 4								// GPIO4 / 
-#define OLED_RST 16								// Reset pin (Some OLED displays do not have it)
-
-#elif _PIN_OUT==5								// TTGO with external OLED
-#define OLED_SCL 22								// GPIO22 / SCL
-#define OLED_SDA 21								// GPIO21 / SDA
-#define OLED_RST 16								// Reset pin (Some OLED displays do not have it)
-
-#endif
-
-
-// ----------------------------------------------------------------------------------------
-// Define the different OLED versions
-//
-#if _OLED==1
-#include "SSD1306.h"
-#define OLED_ADDR 0x3C							// Default 0x3C for 0.9", for 1.3" it is 0x78
-SSD1306  display(OLED_ADDR, OLED_SDA, OLED_SCL);// i2c ADDR & SDA, SCL on wemos
-#endif
-
-// This is an 1.3" OLED display which is running on I2C
-#if _OLED==2
-#include "SH1106.h"
-#define OLED_ADDR 0x3C							// Default 0x3C for 1.3" SH1106
-SH1106  display(OLED_ADDR, OLED_SDA, OLED_SCL);	// i2c ADDR & SDA, SCL on wemos
-#endif
-
-#endif// _OLED>=1
\ No newline at end of file