/* USER CODE BEGIN Header */
/**
  ******************************************************************************
  * @file         stm32wlxx_hal_msp.c
  * @brief        This file provides code for the MSP Initialization
  *               and de-Initialization codes.
  ******************************************************************************
  * @attention
  *
  * Copyright (c) 2021 STMicroelectronics.
  * All rights reserved.
  *
  * This software is licensed under terms that can be found in the LICENSE file
  * in the root directory of this software component.
  * If no LICENSE file comes with this software, it is provided AS-IS.
  *
  ******************************************************************************
  */
/* USER CODE END Header */

/* Includes ------------------------------------------------------------------*/
#include "main.h"
/* USER CODE BEGIN Includes */

/* USER CODE END Includes */

/* Private typedef -----------------------------------------------------------*/
/* USER CODE BEGIN TD */

/* USER CODE END TD */

/* Private define ------------------------------------------------------------*/
/* USER CODE BEGIN Define */

/* USER CODE END Define */

/* Private macro -------------------------------------------------------------*/
/* USER CODE BEGIN Macro */

/* USER CODE END Macro */

/* Private variables ---------------------------------------------------------*/
/* USER CODE BEGIN PV */

/* USER CODE END PV */

/* Private function prototypes -----------------------------------------------*/
/* USER CODE BEGIN PFP */

/* USER CODE END PFP */

/* External functions --------------------------------------------------------*/
/* USER CODE BEGIN ExternalFunctions */

/* USER CODE END ExternalFunctions */

/* USER CODE BEGIN 0 */

/* USER CODE END 0 */
/**
  * Initializes the Global MSP.
  */
void HAL_MspInit(void)
{
  /* USER CODE BEGIN MspInit 0 */

  /* USER CODE END MspInit 0 */

  /* System interrupt init*/

  /* USER CODE BEGIN MspInit 1 */

  /* USER CODE END MspInit 1 */
}

/* USER CODE BEGIN 1 */
/**
* @brief I2C MSP Initialization
* This function configures the hardware resources used in this example
* @param hi2c: I2C handle pointer
* @retval None
*/
void HAL_I2C_MspInit(I2C_HandleTypeDef* hi2c)
{
  GPIO_InitTypeDef GPIO_InitStruct = {0};
  RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = {0};
  if(hi2c->Instance==I2C1)
  {
  /* USER CODE BEGIN I2C1_MspInit 0 */
  
  /* USER CODE END I2C1_MspInit 0 */
  /** Initializes the peripherals clocks
  */
    PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_I2C1;
    PeriphClkInitStruct.I2c1ClockSelection = RCC_I2C1CLKSOURCE_PCLK1;
    if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK)
    {
      Error_Handler();
    }

    __HAL_RCC_GPIOB_CLK_ENABLE();
		
    /**I2C1 GPIO Configuration				//STM32WL55
    PB7     ------> I2C1_SDA
    PB8     ------> I2C1_SCL
    */
#ifdef USE_STM32WL55
    GPIO_InitStruct.Pin = GPIO_PIN_7|GPIO_PIN_8;
    GPIO_InitStruct.Mode = GPIO_MODE_AF_OD;
    GPIO_InitStruct.Pull = GPIO_PULLUP;
    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
    GPIO_InitStruct.Alternate = GPIO_AF4_I2C1;
    HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
#endif 
		
				
    /**I2C1 GPIO Configuration
    PA10     ------> I2C1_SDA					//STM32WLE5
    PB8     ------> I2C1_SCL
    */

#ifdef	USE_STM32WLE5		
		
    __HAL_RCC_GPIOB_CLK_ENABLE();

    GPIO_InitStruct.Pin = GPIO_PIN_6;
    GPIO_InitStruct.Mode = GPIO_MODE_AF_OD;
    GPIO_InitStruct.Pull = GPIO_PULLUP;
    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
    GPIO_InitStruct.Alternate = GPIO_AF4_I2C1;
    HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
		
		GPIO_InitStruct.Pin = GPIO_PIN_7;
    GPIO_InitStruct.Mode = GPIO_MODE_AF_OD;
    GPIO_InitStruct.Pull = GPIO_PULLUP;
    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
    GPIO_InitStruct.Alternate = GPIO_AF4_I2C1;
    HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
#endif
    /* Peripheral clock enable */
    __HAL_RCC_I2C1_CLK_ENABLE();
  /* USER CODE BEGIN I2C1_MspInit 1 */
    /* NVIC for I2Cx_MASTER */
    HAL_NVIC_SetPriority(I2Cx_MASTER_ER_IRQn, 1, 0);
    HAL_NVIC_EnableIRQ(I2Cx_MASTER_ER_IRQn);
    HAL_NVIC_SetPriority(I2Cx_MASTER_EV_IRQn, 2, 0);
    HAL_NVIC_EnableIRQ(I2Cx_MASTER_EV_IRQn);
  /* USER CODE END I2C1_MspInit 1 */
  }
  else if(hi2c->Instance==I2C2)
  {
  /* USER CODE BEGIN I2C2_MspInit 0 */
  
  /* USER CODE END I2C2_MspInit 0 */

  /** Initializes the peripherals clocks
  */
    PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_I2C2;
    PeriphClkInitStruct.I2c2ClockSelection = RCC_I2C2CLKSOURCE_PCLK1;
    if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK)
    {
      Error_Handler();
    }

    __HAL_RCC_GPIOA_CLK_ENABLE();
		
    /**I2C2 GPIO Configuration			//STM32WL55
    PA12     ------> I2C2_SCL
    PA15     ------> I2C2_SDA
    */
#ifdef USE_STM32WL55
		GPIO_InitStruct.Pin = GPIO_PIN_12|GPIO_PIN_15;
    GPIO_InitStruct.Mode = GPIO_MODE_AF_OD;
    GPIO_InitStruct.Pull = GPIO_PULLUP;
    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
    GPIO_InitStruct.Alternate = GPIO_AF4_I2C2;
    HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);		
#endif
		
		/**I2C2 GPIO Configuration			//STM32WLE5
    PA12     ------> I2C2_SCL
    PA11     ------> I2C2_SDA
    */
#ifdef	USE_STM32WLE5
		GPIO_InitStruct.Pin = GPIO_PIN_12|GPIO_PIN_11;
    GPIO_InitStruct.Mode = GPIO_MODE_AF_OD;
    GPIO_InitStruct.Pull = GPIO_PULLUP;
    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
    GPIO_InitStruct.Alternate = GPIO_AF4_I2C2;
    HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
#endif

    /* Peripheral clock enable */
    __HAL_RCC_I2C2_CLK_ENABLE();
  /* USER CODE BEGIN I2C2_MspInit 1 */
    /* NVIC for I2Cx_SLAVE */
    HAL_NVIC_SetPriority(I2Cx_SLAVE_ER_IRQn, 1, 0);
    HAL_NVIC_EnableIRQ(I2Cx_SLAVE_ER_IRQn);
    HAL_NVIC_SetPriority(I2Cx_SLAVE_EV_IRQn, 2, 0);
    HAL_NVIC_EnableIRQ(I2Cx_SLAVE_EV_IRQn);
  /* USER CODE END I2C2_MspInit 1 */
  }

}

/**
* @brief I2C MSP De-Initialization
* This function freeze the hardware resources used in this example
* @param hi2c: I2C handle pointer
* @retval None
*/
void HAL_I2C_MspDeInit(I2C_HandleTypeDef* hi2c)
{
  if(hi2c->Instance==I2C1)
  {
  /* USER CODE BEGIN I2C1_MspDeInit 0 */
  
  /* USER CODE END I2C1_MspDeInit 0 */
    /* Peripheral clock disable */
    __HAL_RCC_I2C1_CLK_DISABLE();

    /**I2C1 GPIO Configuration					//STM32WL55
    PB7     ------> I2C1_SDA
    PB8     ------> I2C1_SCL
    */
#ifdef	USE_STM32WL55
    HAL_GPIO_DeInit(GPIOB, GPIO_PIN_7);
    HAL_GPIO_DeInit(GPIOB, GPIO_PIN_8);
#endif
		
		/**I2C1 GPIO Configuration					//STM32WLE5
    PA10     ------> I2C1_SDA
    PB8     ------> I2C1_SCL
    */		
#ifdef	USE_STM32WLE5
    HAL_GPIO_DeInit(GPIOB, GPIO_PIN_6);
    HAL_GPIO_DeInit(GPIOB, GPIO_PIN_7);
#endif

  /* USER CODE BEGIN I2C1_MspDeInit 1 */

    HAL_NVIC_DisableIRQ(I2Cx_MASTER_ER_IRQn);
    HAL_NVIC_DisableIRQ(I2Cx_MASTER_EV_IRQn);
  /* USER CODE END I2C1_MspDeInit 1 */
  }
  else if(hi2c->Instance==I2C2)
  {
  /* USER CODE BEGIN I2C2_MspDeInit 0 */
  
  /* USER CODE END I2C2_MspDeInit 0 */
    /* Peripheral clock disable */
    __HAL_RCC_I2C2_CLK_DISABLE();

    /**I2C2 GPIO Configuration				//STM32WL55
    PA12     ------> I2C2_SCL
    PA15     ------> I2C2_SDA
    */
		
#ifdef	USE_STM32WL55
    HAL_GPIO_DeInit(GPIOA, GPIO_PIN_12);
    HAL_GPIO_DeInit(GPIOA, GPIO_PIN_15);
#endif
		
    /**I2C2 GPIO Configuration				//STM32WLE5
    PA12     ------> I2C2_SCL
    PA11     ------> I2C2_SDA
    */
		
#ifdef	USE_STM32WLE5
    HAL_GPIO_DeInit(GPIOA, GPIO_PIN_12);
    HAL_GPIO_DeInit(GPIOA, GPIO_PIN_11);
#endif
    
  /* USER CODE BEGIN I2C2_MspDeInit 1 */

    HAL_NVIC_DisableIRQ(I2Cx_SLAVE_ER_IRQn);
    HAL_NVIC_DisableIRQ(I2Cx_SLAVE_EV_IRQn);
  /* USER CODE END I2C2_MspDeInit 1 */
  }

}
/**
* @brief TIM_Base MSP Initialization
* This function configures the hardware resources used in this example
* @param htim_base: TIM_Base handle pointer
* @retval None
*/
void HAL_TIM_Base_MspInit(TIM_HandleTypeDef* htim_base)
{
  if(htim_base->Instance==TIM2)
  {
  /* USER CODE BEGIN TIM2_MspInit 0 */

  /* USER CODE END TIM2_MspInit 0 */
    /* Peripheral clock enable */
    __HAL_RCC_TIM2_CLK_ENABLE();
    /* TIM2 interrupt Init */
    HAL_NVIC_SetPriority(TIM2_IRQn, 3, 0);
    HAL_NVIC_EnableIRQ(TIM2_IRQn);
  /* USER CODE BEGIN TIM2_MspInit 1 */

  /* USER CODE END TIM2_MspInit 1 */
  }

}

/**
* @brief TIM_Base MSP De-Initialization
* This function freeze the hardware resources used in this example
* @param htim_base: TIM_Base handle pointer
* @retval None
*/
void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef* htim_base)
{
  if(htim_base->Instance==TIM2)
  {
  /* USER CODE BEGIN TIM2_MspDeInit 0 */

  /* USER CODE END TIM2_MspDeInit 0 */
    /* Peripheral clock disable */
    __HAL_RCC_TIM2_CLK_DISABLE();

    /* TIM2 interrupt DeInit */
    HAL_NVIC_DisableIRQ(TIM2_IRQn);
  /* USER CODE BEGIN TIM2_MspDeInit 1 */

  /* USER CODE END TIM2_MspDeInit 1 */
  }

}

/* USER CODE END 1 */