HALL1, HALL2 good to int
This commit is contained in:
parent
c8ea66d585
commit
0a620cfb79
|
|
@ -28,10 +28,9 @@ extern "C" {
|
|||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32wlxx_hal.h"
|
||||
#include "yunhorn_sts_prd_conf.h"
|
||||
/* Private includes ----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN Includes */
|
||||
#include "yunhorn_sts_prd_conf.h"
|
||||
#include "stm32wlxx_nucleo.h"
|
||||
|
||||
/* USER CODE END Includes */
|
||||
|
||||
|
|
@ -99,6 +98,23 @@ void MX_TOF_Init(void);
|
|||
#define BUT2_GPIO_Port GPIOA
|
||||
#define BUT2_EXTI_IRQn EXTI1_IRQn
|
||||
|
||||
#ifdef STS_O5 // STS_O5_JP 2024-04-10
|
||||
#define HALL1_OUT_Pin GPIO_PIN_0
|
||||
#define HALL1_OUT_GPIO_Port GPIOA
|
||||
#define HALL1_OUT_EXTI_IRQn EXTI0_IRQn
|
||||
|
||||
#define HALL1_VCC_Pin GPIO_PIN_3
|
||||
#define HALL1_VCC_GPIO_Port GPIOB
|
||||
|
||||
#define HALL2_OUT_Pin GPIO_PIN_10
|
||||
#define HALL2_OUT_GPIO_Port GPIOA
|
||||
#define HALL2_OUT_EXTI_IRQn EXTI15_10_IRQn
|
||||
|
||||
#define HALL2_VCC_Pin GPIO_PIN_4
|
||||
#define HALL2_VCC_GPIO_Port GPIOB
|
||||
|
||||
|
||||
#endif
|
||||
#if defined(STM32WL55xx)
|
||||
#define BUT3_Pin GPIO_PIN_6
|
||||
#define BUT3_GPIO_Port GPIOC
|
||||
|
|
@ -115,11 +131,8 @@ void MX_TOF_Init(void);
|
|||
|
||||
#define MEMS_RESET_Pin GPIO_PIN_4
|
||||
#define MEMS_RESET_GPIO_Port GPIOB
|
||||
|
||||
#define PME_ON HAL_GPIO_WritePin(MEMS_RESET_GPIO_Port, MEMS_POWER_Pin, GPIO_PIN_SET )
|
||||
#define PME_OFF HAL_GPIO_WritePin(MEMS_RESET_GPIO_Port, MEMS_POWER_Pin, GPIO_PIN_RESET )
|
||||
|
||||
|
||||
#define PME_ON HAL_GPIO_WritePin(MEMS_POWER_GPIO_Port, MEMS_POWER_Pin, GPIO_PIN_SET)
|
||||
#define PME_OFF HAL_GPIO_WritePin(MEMS_POWER_GPIO_Port, MEMS_POWER_Pin, GPIO_PIN_RESET)
|
||||
#define TOF250_I2C_ADDR (0x52<<1)
|
||||
|
||||
#if defined(STM32WLE5xx) || defined(STM32WL55xx)
|
||||
|
|
@ -136,70 +149,70 @@ void MX_TOF_Init(void);
|
|||
/* | | | */
|
||||
/* | TOF-2 | TOF-1 | */
|
||||
/* -------------------- | ------------------ | */
|
||||
/* U4, PA-9 | U3, PB-3 | */
|
||||
/* U4, PA-9 | U3, PB-5 | */
|
||||
|
||||
|
||||
/* TOF_1, U3 RIGHT CORNER, PB-3 */
|
||||
/* TOF_1, U3 RIGHT CORNER, PB-5 */
|
||||
|
||||
#if defined(TOF_1)&& defined(STM32WLE5xx)
|
||||
#define TOF_C_INT_Pin GPIO_PIN_5
|
||||
#define TOF_C_INT_GPIO_Port GPIOB
|
||||
#define TOF_C_INT_EXTI_IRQn EXTI9_5_IRQn
|
||||
#define TOF_C_XSHUT_Pin GPIO_PIN_3
|
||||
#define TOF_C_XSHUT_GPIO_Port GPIOB
|
||||
#if defined(TOF_1) //&& defined(STM32WLE5xx)
|
||||
#define TOF_C_INT_Pin GPIO_PIN_3 // 2024-04-08 WAS GPIO_PIN_5
|
||||
#define TOF_C_INT_GPIO_Port GPIOB
|
||||
#define TOF_C_INT_EXTI_IRQn EXTI3_IRQn // 2024-04-08 WAS EXTI9_5_IRQn
|
||||
#define TOF_C_XSHUT_Pin GPIO_PIN_5 // 2024-04-08 WAS GPIO_PIN_3
|
||||
#define TOF_C_XSHUT_GPIO_Port GPIOB
|
||||
#endif
|
||||
// Common Shared Int Pin and Port for VL53L0X
|
||||
|
||||
#define TOF_INT_EXTI_PIN GPIO_PIN_5 //TOF_C_INT_Pin
|
||||
#define TOF_INT_EXTI_PORT GPIOB //TOF_C_INT_GPIO_Port
|
||||
#define TOF_INT_EXTI_PIN GPIO_PIN_3 // 2024-04-08 WAS GPIO_PIN_5 //TOF_C_INT_Pin
|
||||
#define TOF_INT_EXTI_PORT GPIOB //TOF_C_INT_GPIO_Port
|
||||
|
||||
/* TOF_2, */
|
||||
#if defined(TOF_2) && defined(STM32WL55xx)
|
||||
#define TOF_L_INT_Pin GPIO_PIN_7
|
||||
#define TOF_L_INT_GPIO_Port GPIOC
|
||||
#define TOF_L_INT_EXTI_IRQn EXTI9_5_IRQn
|
||||
#define TOF_L_XSHUT_Pin GPIO_PIN_10
|
||||
#define TOF_L_XSHUT_GPIO_Port GPIOB
|
||||
#define TOF_L_INT_Pin GPIO_PIN_7
|
||||
#define TOF_L_INT_GPIO_Port GPIOC
|
||||
#define TOF_L_INT_EXTI_IRQn EXTI9_5_IRQn
|
||||
#define TOF_L_XSHUT_Pin GPIO_PIN_10
|
||||
#define TOF_L_XSHUT_GPIO_Port GPIOB
|
||||
#endif
|
||||
|
||||
|
||||
/* TOF_2, U4 LEFT CORNER, PA-9 */
|
||||
#if defined(TOF_1) && defined(STM32WLE5xx)
|
||||
#define TOF_L_INT_Pin GPIO_PIN_5
|
||||
#define TOF_L_INT_GPIO_Port GPIOB
|
||||
#define TOF_L_INT_EXTI_IRQn EXTI9_5_IRQn
|
||||
#define TOF_L_XSHUT_Pin GPIO_PIN_9
|
||||
#define TOF_L_XSHUT_GPIO_Port GPIOA
|
||||
#if defined(TOF_2) && defined(STM32WLE5xx)
|
||||
#define TOF_L_INT_Pin GPIO_PIN_3 // 2024-04-08 WAS GPIO_PIN_5
|
||||
#define TOF_L_INT_GPIO_Port GPIOB
|
||||
#define TOF_L_INT_EXTI_IRQn EXTI3_IRQn // 2024-04-08 WAS EXTI9_5_IRQn
|
||||
#define TOF_L_XSHUT_Pin GPIO_PIN_9
|
||||
#define TOF_L_XSHUT_GPIO_Port GPIOA
|
||||
#endif
|
||||
|
||||
|
||||
/* TOF_3 */
|
||||
#if defined(STM32WL55xx)&& defined(TOF_3)
|
||||
#define TOF_R_INT_Pin GPIO_PIN_10
|
||||
#define TOF_R_INT_GPIO_Port GPIOA
|
||||
#define TOF_R_INT_EXTI_IRQn EXTI15_10_IRQn
|
||||
#define TOF_R_XSHUT_Pin GPIO_PIN_5
|
||||
#define TOF_R_XSHUT_GPIO_Port GPIOB
|
||||
#define TOF_R_INT_Pin GPIO_PIN_10
|
||||
#define TOF_R_INT_GPIO_Port GPIOA
|
||||
#define TOF_R_INT_EXTI_IRQn EXTI15_10_IRQn
|
||||
#define TOF_R_XSHUT_Pin GPIO_PIN_5
|
||||
#define TOF_R_XSHUT_GPIO_Port GPIOB
|
||||
#endif
|
||||
|
||||
|
||||
/* TOF_3 */
|
||||
#if defined(STM32WLE5xx)&& defined(TOF_3)
|
||||
#define TOF_R_INT_Pin GPIO_PIN_5
|
||||
#define TOF_R_INT_GPIO_Port GPIOB
|
||||
#define TOF_R_INT_EXTI_IRQn EXTI9_5_IRQn
|
||||
#define TOF_R_XSHUT_Pin GPIO_PIN_10
|
||||
#define TOF_R_XSHUT_GPIO_Port GPIOA
|
||||
#define TOF_R_INT_Pin GPIO_PIN_3 // 2024-04-08 WAS GPIO_PIN_5
|
||||
#define TOF_R_INT_GPIO_Port GPIOB
|
||||
#define TOF_R_INT_EXTI_IRQn EXTI3_IRQn // 2024-04-08 WAS EXTI9_5_IRQn
|
||||
#define TOF_R_XSHUT_Pin GPIO_PIN_10
|
||||
#define TOF_R_XSHUT_GPIO_Port GPIOA
|
||||
#endif
|
||||
|
||||
#if defined(SOAP_LEVEL_SENSOR)
|
||||
/* IF_SOAP_IN, MEMS_IF_3, PA10 */
|
||||
#define SOAP_STATUS_Pin GPIO_PIN_10
|
||||
#define SOAP_STATUS_GPIO_Port GPIOA
|
||||
#define SOAP_STATUS_Pin GPIO_PIN_10
|
||||
#define SOAP_STATUS_GPIO_Port GPIOA
|
||||
|
||||
/* IF_SENSOR_ON_OFF, MEMS_IF_1, PB3 */
|
||||
#define SOAP_SWITCH_Pin GPIO_PIN_3
|
||||
#define SOAP_SWITCH_GPIO_Port GPIOB
|
||||
#define SOAP_SWITCH_Pin GPIO_PIN_5 // 2024-04-08 WAS GPIO_PIN_3
|
||||
#define SOAP_SWITCH_GPIO_Port GPIOB
|
||||
|
||||
#define SOAP_DATA HAL_GPIO_ReadPin(SOAP_STATUS_GPIO_Port,SOAP_STATUS_Pin)
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -58,8 +58,8 @@ void MX_GPIO_Init(void)
|
|||
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
||||
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
|
||||
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
|
||||
__HAL_RCC_GPIOA_CLK_DISABLE();
|
||||
__HAL_RCC_GPIOB_CLK_DISABLE();
|
||||
|
||||
|
||||
__HAL_RCC_GPIOC_CLK_DISABLE();
|
||||
|
||||
/*Configure GPIO pin Output Level */
|
||||
|
|
@ -99,6 +99,35 @@ void MX_GPIO_Init(void)
|
|||
GPIO_InitStruct.Pull = GPIO_PULLUP;
|
||||
HAL_GPIO_Init(BUT2_GPIO_Port, &GPIO_InitStruct);
|
||||
#endif
|
||||
#ifdef STS_O5
|
||||
/*Configure GPIO pin : PtPin */
|
||||
GPIO_InitStruct.Pin = HALL1_OUT_Pin;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_IT_RISING_FALLING;
|
||||
GPIO_InitStruct.Pull = GPIO_PULLUP;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
|
||||
HAL_GPIO_Init(HALL1_OUT_GPIO_Port, &GPIO_InitStruct);
|
||||
|
||||
/*Configure GPIO pin : PtPin */
|
||||
GPIO_InitStruct.Pin = HALL2_OUT_Pin;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_IT_RISING_FALLING;
|
||||
GPIO_InitStruct.Pull = GPIO_PULLUP;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
|
||||
HAL_GPIO_Init(HALL2_OUT_GPIO_Port, &GPIO_InitStruct);
|
||||
|
||||
|
||||
GPIO_InitStruct.Pin = HALL1_VCC_Pin;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
|
||||
HAL_GPIO_Init(HALL1_VCC_GPIO_Port, &GPIO_InitStruct);
|
||||
|
||||
GPIO_InitStruct.Pin = HALL2_VCC_Pin;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
|
||||
HAL_GPIO_Init(HALL2_VCC_GPIO_Port, &GPIO_InitStruct);
|
||||
|
||||
#else
|
||||
/*Configure GPIO pin : PtPin */
|
||||
__HAL_RCC_GPIOA_CLK_ENABLE();
|
||||
GPIO_InitStruct.Pin = BUT1_Pin;
|
||||
|
|
@ -107,16 +136,19 @@ void MX_GPIO_Init(void)
|
|||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
|
||||
HAL_GPIO_Init(BUT1_GPIO_Port, &GPIO_InitStruct);
|
||||
//__HAL_RCC_GPIOA_CLK_DISABLE();
|
||||
#endif
|
||||
|
||||
__HAL_RCC_GPIOB_CLK_ENABLE();
|
||||
GPIO_InitStruct.Pin = MEMS_POWER_Pin;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_IT_RISING_FALLING;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_PULLDOWN;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
|
||||
HAL_GPIO_Init(MEMS_POWER_GPIO_Port, &GPIO_InitStruct);
|
||||
PME_ON;
|
||||
|
||||
//turn on power
|
||||
//__HAL_RCC_GPIOB_CLK_DISABLE();
|
||||
__HAL_RCC_GPIOC_CLK_DISABLE();
|
||||
//__HAL_RCC_GPIOA_CLK_DISABLE();
|
||||
|
||||
/*Configure GPIO pins : TOF_C_INT_Pin */
|
||||
#if defined(TOF_1)
|
||||
|
|
@ -196,10 +228,20 @@ HAL_GPIO_Init(SOAP_SWITCH_GPIO_Port, &GPIO_InitStruct);
|
|||
/* ============== SOAP LEVEL DETECTION ========================= */
|
||||
#endif
|
||||
|
||||
#ifdef STS_O5
|
||||
/* EXTI interrupt init*/
|
||||
HAL_NVIC_SetPriority(HALL1_OUT_EXTI_IRQn, 0, 0);
|
||||
HAL_NVIC_EnableIRQ(HALL1_OUT_EXTI_IRQn);
|
||||
|
||||
HAL_NVIC_SetPriority(HALL2_OUT_EXTI_IRQn, 0, 0);
|
||||
HAL_NVIC_EnableIRQ(HALL2_OUT_EXTI_IRQn);
|
||||
|
||||
#else
|
||||
/* EXTI interrupt init*/
|
||||
HAL_NVIC_SetPriority(EXTI0_IRQn, 0, 0);
|
||||
HAL_NVIC_EnableIRQ(EXTI0_IRQn);
|
||||
#endif
|
||||
|
||||
#if 0
|
||||
HAL_NVIC_SetPriority(EXTI1_IRQn, 0, 0);
|
||||
HAL_NVIC_EnableIRQ(EXTI1_IRQn);
|
||||
|
|
|
|||
|
|
@ -63,7 +63,9 @@
|
|||
/* Private function prototypes -----------------------------------------------*/
|
||||
void SystemClock_Config(void);
|
||||
/* USER CODE BEGIN PFP */
|
||||
#if 0
|
||||
static void WkupPin1_Config(void);
|
||||
#endif
|
||||
//#define PUTCHAR_PROTOTYPE int fputc(int ch, FILE *f)
|
||||
/* USER CODE END PFP */
|
||||
|
||||
|
|
@ -103,15 +105,16 @@ int main(void)
|
|||
SystemClock_Config();
|
||||
|
||||
/* USER CODE BEGIN SysInit */
|
||||
#if 0
|
||||
/* Configure the wake_up pin */
|
||||
WkupPin1_Config();
|
||||
/* USER CODE END SysInit */
|
||||
|
||||
#endif
|
||||
/* Initialize all configured peripherals */
|
||||
//MX_GPIO_Init();
|
||||
#if 0
|
||||
MX_GPIO_Init();
|
||||
MX_DMA_Init();
|
||||
|
||||
#if 0
|
||||
MX_I2C2_Init();
|
||||
#endif
|
||||
|
||||
|
|
@ -186,7 +189,7 @@ void SystemClock_Config(void)
|
|||
Error_Handler();
|
||||
}
|
||||
}
|
||||
|
||||
#if 0
|
||||
/* USER CODE BEGIN 4 */
|
||||
static void WkupPin1_Config(void)
|
||||
{
|
||||
|
|
@ -200,7 +203,7 @@ static void WkupPin1_Config(void)
|
|||
|
||||
}
|
||||
/* USER CODE END 4 */
|
||||
|
||||
#endif
|
||||
/**
|
||||
* @brief This function is executed in case of error occurrence.
|
||||
* @retval None
|
||||
|
|
|
|||
|
|
@ -385,6 +385,7 @@ void EXTI9_5_IRQHandler(void)
|
|||
|
||||
/* USER CODE END EXTI9_5_IRQn 1 */
|
||||
}
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief This function handles EXTI Lines [9:5] Interrupt.
|
||||
|
|
@ -394,7 +395,11 @@ void EXTI15_10_IRQHandler(void)
|
|||
/* USER CODE BEGIN EXTI15_10_IRQn 0 */
|
||||
|
||||
/* USER CODE END EXTI15_10_IRQn 0 */
|
||||
#if defined(STM32WL55xx)
|
||||
#ifdef STS_O5
|
||||
HAL_GPIO_EXTI_IRQHandler(HALL2_OUT_Pin);
|
||||
|
||||
#else
|
||||
|
||||
HAL_GPIO_EXTI_IRQHandler(TOF_INT_EXTI_PIN);
|
||||
#endif
|
||||
/* USER CODE BEGIN EXTI15_10_IRQn 1 */
|
||||
|
|
@ -402,7 +407,6 @@ void EXTI15_10_IRQHandler(void)
|
|||
/* USER CODE END EXTI15_10_IRQn 1 */
|
||||
}
|
||||
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief This function handles USART2 Interrupt.
|
||||
|
|
|
|||
|
|
@ -631,33 +631,42 @@ void LoRaWAN_Init(void)
|
|||
|
||||
void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin)
|
||||
{
|
||||
uint8_t pinstate = 0;
|
||||
switch (GPIO_Pin)
|
||||
{
|
||||
case BUT1_Pin:
|
||||
|
||||
#ifdef YUNHORN_STS_O5_ENABLED
|
||||
#ifdef STS_O5
|
||||
case HALL1_OUT_Pin:
|
||||
pinstate = HAL_GPIO_ReadPin(HALL1_OUT_GPIO_Port, HALL1_OUT_Pin);
|
||||
APP_LOG(TS_OFF, VLEVEL_M, "## HALL 1 DETECTED: %2d \r\n", pinstate);
|
||||
UTIL_SEQ_SetTask((1 << CFG_SEQ_Task_LoRaSendOnTxTimerOrButtonEvent), CFG_SEQ_Prio_0);
|
||||
break;
|
||||
|
||||
case HALL2_OUT_Pin:
|
||||
pinstate = HAL_GPIO_ReadPin(HALL2_OUT_GPIO_Port, HALL2_OUT_Pin);
|
||||
APP_LOG(TS_OFF, VLEVEL_M, "## HALL 2 DETECTED: %2d \r\n", pinstate);
|
||||
UTIL_SEQ_SetTask((1 << CFG_SEQ_Task_LoRaSendOnTxTimerOrButtonEvent), CFG_SEQ_Prio_0);
|
||||
break;
|
||||
#else
|
||||
|
||||
case BUT1_Pin:
|
||||
UTIL_SEQ_SetTask((1 << CFG_SEQ_Task_LoRaSendOnTxTimerOrButtonEvent), CFG_SEQ_Prio_0);
|
||||
|
||||
if (EventType == TX_ON_EVENT)
|
||||
{
|
||||
UTIL_SEQ_SetTask((1 << CFG_SEQ_Task_LoRaSendOnTxTimerOrButtonEvent), CFG_SEQ_Prio_0);
|
||||
} else
|
||||
{
|
||||
#ifdef LED_ONBOARD
|
||||
LED_ON;
|
||||
HAL_Delay(20);
|
||||
LED_OFF;
|
||||
#endif
|
||||
}
|
||||
#endif
|
||||
|
||||
break;
|
||||
|
||||
case BUT2_Pin:
|
||||
|
||||
#if defined(STS_USE_STM32WLE5)
|
||||
UTIL_SEQ_SetTask((1 << CFG_SEQ_Task_LoRaStopJoinEvent), CFG_SEQ_Prio_0);
|
||||
#endif
|
||||
break;
|
||||
|
||||
#endif
|
||||
|
||||
#if defined(STS_USE_STM32WL55)
|
||||
case BUT3_Pin:
|
||||
|
||||
|
|
|
|||
|
|
@ -1,3 +1,3 @@
|
|||
D:/ONEDRIVE/STM32WLV13/Projects/NUCLEO-WL55JC/Applications/LoRaWAN/STS_RR_R125/Core/Src/main.c:146:6:SystemClock_Config 3
|
||||
D:/ONEDRIVE/STM32WLV13/Projects/NUCLEO-WL55JC/Applications/LoRaWAN/STS_RR_R125/Core/Src/main.c:87:5:main 1
|
||||
D:/ONEDRIVE/STM32WLV13/Projects/NUCLEO-WL55JC/Applications/LoRaWAN/STS_RR_R125/Core/Src/main.c:208:6:Error_Handler 1
|
||||
D:/ONEDRIVE/STM32WLV13/Projects/NUCLEO-WL55JC/Applications/LoRaWAN/STS_RR_R125/Core/Src/main.c:149:6:SystemClock_Config 3
|
||||
D:/ONEDRIVE/STM32WLV13/Projects/NUCLEO-WL55JC/Applications/LoRaWAN/STS_RR_R125/Core/Src/main.c:89:5:main 1
|
||||
D:/ONEDRIVE/STM32WLV13/Projects/NUCLEO-WL55JC/Applications/LoRaWAN/STS_RR_R125/Core/Src/main.c:211:6:Error_Handler 1
|
||||
|
|
|
|||
|
|
@ -1,15 +0,0 @@
|
|||
D:/ONEDRIVE/STM32WLV13/Projects/NUCLEO-WL55JC/Applications/LoRaWAN/STS_RR_R125/Core/Src/stm32wlxx_it.c:93:6:NMI_Handler 1
|
||||
D:/ONEDRIVE/STM32WLV13/Projects/NUCLEO-WL55JC/Applications/LoRaWAN/STS_RR_R125/Core/Src/stm32wlxx_it.c:108:6:HardFault_Handler 1
|
||||
D:/ONEDRIVE/STM32WLV13/Projects/NUCLEO-WL55JC/Applications/LoRaWAN/STS_RR_R125/Core/Src/stm32wlxx_it.c:123:6:MemManage_Handler 1
|
||||
D:/ONEDRIVE/STM32WLV13/Projects/NUCLEO-WL55JC/Applications/LoRaWAN/STS_RR_R125/Core/Src/stm32wlxx_it.c:138:6:BusFault_Handler 1
|
||||
D:/ONEDRIVE/STM32WLV13/Projects/NUCLEO-WL55JC/Applications/LoRaWAN/STS_RR_R125/Core/Src/stm32wlxx_it.c:153:6:UsageFault_Handler 1
|
||||
D:/ONEDRIVE/STM32WLV13/Projects/NUCLEO-WL55JC/Applications/LoRaWAN/STS_RR_R125/Core/Src/stm32wlxx_it.c:168:6:SVC_Handler 1
|
||||
D:/ONEDRIVE/STM32WLV13/Projects/NUCLEO-WL55JC/Applications/LoRaWAN/STS_RR_R125/Core/Src/stm32wlxx_it.c:181:6:DebugMon_Handler 1
|
||||
D:/ONEDRIVE/STM32WLV13/Projects/NUCLEO-WL55JC/Applications/LoRaWAN/STS_RR_R125/Core/Src/stm32wlxx_it.c:194:6:PendSV_Handler 1
|
||||
D:/ONEDRIVE/STM32WLV13/Projects/NUCLEO-WL55JC/Applications/LoRaWAN/STS_RR_R125/Core/Src/stm32wlxx_it.c:207:6:SysTick_Handler 1
|
||||
D:/ONEDRIVE/STM32WLV13/Projects/NUCLEO-WL55JC/Applications/LoRaWAN/STS_RR_R125/Core/Src/stm32wlxx_it.c:227:6:TAMP_STAMP_LSECSS_SSRU_IRQHandler 1
|
||||
D:/ONEDRIVE/STM32WLV13/Projects/NUCLEO-WL55JC/Applications/LoRaWAN/STS_RR_R125/Core/Src/stm32wlxx_it.c:241:6:EXTI0_IRQHandler 1
|
||||
D:/ONEDRIVE/STM32WLV13/Projects/NUCLEO-WL55JC/Applications/LoRaWAN/STS_RR_R125/Core/Src/stm32wlxx_it.c:343:6:DMA1_Channel7_IRQHandler 1
|
||||
D:/ONEDRIVE/STM32WLV13/Projects/NUCLEO-WL55JC/Applications/LoRaWAN/STS_RR_R125/Core/Src/stm32wlxx_it.c:410:6:USART2_IRQHandler 1
|
||||
D:/ONEDRIVE/STM32WLV13/Projects/NUCLEO-WL55JC/Applications/LoRaWAN/STS_RR_R125/Core/Src/stm32wlxx_it.c:424:6:RTC_Alarm_IRQHandler 1
|
||||
D:/ONEDRIVE/STM32WLV13/Projects/NUCLEO-WL55JC/Applications/LoRaWAN/STS_RR_R125/Core/Src/stm32wlxx_it.c:438:6:SUBGHZ_Radio_IRQHandler 1
|
||||
|
|
@ -1,35 +0,0 @@
|
|||
D:/ONEDRIVE/STM32WLV13/Projects/NUCLEO-WL55JC/Applications/LoRaWAN/STS_RR_R125/LoRaWAN/App/lora_app.c:941:13:OnTxTimerLedEvent 1
|
||||
D:/ONEDRIVE/STM32WLV13/Projects/NUCLEO-WL55JC/Applications/LoRaWAN/STS_RR_R125/LoRaWAN/App/lora_app.c:1117:13:OnTxFrameCtrlChanged 1
|
||||
D:/ONEDRIVE/STM32WLV13/Projects/NUCLEO-WL55JC/Applications/LoRaWAN/STS_RR_R125/LoRaWAN/App/lora_app.c:1128:13:OnPingSlotPeriodicityChanged 1
|
||||
D:/ONEDRIVE/STM32WLV13/Projects/NUCLEO-WL55JC/Applications/LoRaWAN/STS_RR_R125/LoRaWAN/App/lora_app.c:1076:13:OnClassChange 1
|
||||
D:/ONEDRIVE/STM32WLV13/Projects/NUCLEO-WL55JC/Applications/LoRaWAN/STS_RR_R125/LoRaWAN/App/lora_app.c:925:13:OnTxTimerEvent 1
|
||||
D:/ONEDRIVE/STM32WLV13/Projects/NUCLEO-WL55JC/Applications/LoRaWAN/STS_RR_R125/LoRaWAN/App/lora_app.c:1083:13:OnMacProcessNotify 1
|
||||
D:/ONEDRIVE/STM32WLV13/Projects/NUCLEO-WL55JC/Applications/LoRaWAN/STS_RR_R125/LoRaWAN/App/lora_app.c:995:13:OnJoinRequest 4
|
||||
D:/ONEDRIVE/STM32WLV13/Projects/NUCLEO-WL55JC/Applications/LoRaWAN/STS_RR_R125/LoRaWAN/App/lora_app.c:1095:13:OnTxPeriodicityChanged 1
|
||||
D:/ONEDRIVE/STM32WLV13/Projects/NUCLEO-WL55JC/Applications/LoRaWAN/STS_RR_R125/LoRaWAN/App/lora_app.c:1299:13:OnYunhornSTSHeartBeatPeriodicityChanged 2
|
||||
D:/ONEDRIVE/STM32WLV13/Projects/NUCLEO-WL55JC/Applications/LoRaWAN/STS_RR_R125/LoRaWAN/App/lora_app.c:1265:13:OnRestoreContextRequest 1
|
||||
D:/ONEDRIVE/STM32WLV13/Projects/NUCLEO-WL55JC/Applications/LoRaWAN/STS_RR_R125/LoRaWAN/App/lora_app.c:1153:13:StopJoin 2
|
||||
D:/ONEDRIVE/STM32WLV13/Projects/NUCLEO-WL55JC/Applications/LoRaWAN/STS_RR_R125/LoRaWAN/App/lora_app.c:791:13:SendTxData 10
|
||||
D:/ONEDRIVE/STM32WLV13/Projects/NUCLEO-WL55JC/Applications/LoRaWAN/STS_RR_R125/LoRaWAN/App/lora_app.c:1034:13:OnBeaconStatusChange 4
|
||||
D:/ONEDRIVE/STM32WLV13/Projects/NUCLEO-WL55JC/Applications/LoRaWAN/STS_RR_R125/LoRaWAN/App/lora_app.c:1232:13:OnNvmDataChange 2
|
||||
D:/ONEDRIVE/STM32WLV13/Projects/NUCLEO-WL55JC/Applications/LoRaWAN/STS_RR_R125/LoRaWAN/App/lora_app.c:964:13:OnTxData 4
|
||||
D:/ONEDRIVE/STM32WLV13/Projects/NUCLEO-WL55JC/Applications/LoRaWAN/STS_RR_R125/LoRaWAN/App/lora_app.c:1449:13:OnYunhornSTSHeartBeatTimerEvent 5
|
||||
D:/ONEDRIVE/STM32WLV13/Projects/NUCLEO-WL55JC/Applications/LoRaWAN/STS_RR_R125/LoRaWAN/App/lora_app.c:1192:13:OnStopJoinTimerEvent 2
|
||||
D:/ONEDRIVE/STM32WLV13/Projects/NUCLEO-WL55JC/Applications/LoRaWAN/STS_RR_R125/LoRaWAN/App/lora_app.c:1139:13:OnSystemReset 3
|
||||
D:/ONEDRIVE/STM32WLV13/Projects/NUCLEO-WL55JC/Applications/LoRaWAN/STS_RR_R125/LoRaWAN/App/lora_app.c:1250:13:OnStoreContextRequest 2
|
||||
D:/ONEDRIVE/STM32WLV13/Projects/NUCLEO-WL55JC/Applications/LoRaWAN/STS_RR_R125/LoRaWAN/App/lora_app.c:1210:13:StoreContext 3
|
||||
D:/ONEDRIVE/STM32WLV13/Projects/NUCLEO-WL55JC/Applications/LoRaWAN/STS_RR_R125/LoRaWAN/App/lora_app.c:955:13:OnJoinTimerLedEvent 1
|
||||
D:/ONEDRIVE/STM32WLV13/Projects/NUCLEO-WL55JC/Applications/LoRaWAN/STS_RR_R125/LoRaWAN/App/lora_app.c:948:13:OnRxTimerLedEvent 1
|
||||
D:/ONEDRIVE/STM32WLV13/Projects/NUCLEO-WL55JC/Applications/LoRaWAN/STS_RR_R125/LoRaWAN/App/lora_app.c:1069:13:OnSysTimeUpdate 1
|
||||
D:/ONEDRIVE/STM32WLV13/Projects/NUCLEO-WL55JC/Applications/LoRaWAN/STS_RR_R125/LoRaWAN/App/lora_app.c:632:6:HAL_GPIO_EXTI_Callback 3
|
||||
D:/ONEDRIVE/STM32WLV13/Projects/NUCLEO-WL55JC/Applications/LoRaWAN/STS_RR_R125/LoRaWAN/App/lora_app.c:1955:6:STS_SENSOR_Upload_Message 8
|
||||
D:/ONEDRIVE/STM32WLV13/Projects/NUCLEO-WL55JC/Applications/LoRaWAN/STS_RR_R125/LoRaWAN/App/lora_app.c:1942:6:STS_SENSOR_Upload_Config_Invalid_Message 2
|
||||
D:/ONEDRIVE/STM32WLV13/Projects/NUCLEO-WL55JC/Applications/LoRaWAN/STS_RR_R125/LoRaWAN/App/lora_app.c:2003:6:OnStoreSTSCFGContextRequest 4
|
||||
D:/ONEDRIVE/STM32WLV13/Projects/NUCLEO-WL55JC/Applications/LoRaWAN/STS_RR_R125/LoRaWAN/App/lora_app.c:2051:6:OnRestoreSTSCFGContextRequest 1
|
||||
D:/ONEDRIVE/STM32WLV13/Projects/NUCLEO-WL55JC/Applications/LoRaWAN/STS_RR_R125/LoRaWAN/App/lora_app.c:2114:6:OnRestoreSTSCFGContextProcess 8
|
||||
D:/ONEDRIVE/STM32WLV13/Projects/NUCLEO-WL55JC/Applications/LoRaWAN/STS_RR_R125/LoRaWAN/App/lora_app.c:2063:6:STS_REBOOT_CONFIG_Init 6
|
||||
D:/ONEDRIVE/STM32WLV13/Projects/NUCLEO-WL55JC/Applications/LoRaWAN/STS_RR_R125/LoRaWAN/App/lora_app.c:483:6:LoRaWAN_Init 2
|
||||
D:/ONEDRIVE/STM32WLV13/Projects/NUCLEO-WL55JC/Applications/LoRaWAN/STS_RR_R125/LoRaWAN/App/lora_app.c:2182:6:STS_SENSOR_Distance_Test_Process 1
|
||||
D:/ONEDRIVE/STM32WLV13/Projects/NUCLEO-WL55JC/Applications/LoRaWAN/STS_RR_R125/LoRaWAN/App/lora_app.c:2199:6:STS_SENSOR_Function_Test_Process 1
|
||||
D:/ONEDRIVE/STM32WLV13/Projects/NUCLEO-WL55JC/Applications/LoRaWAN/STS_RR_R125/LoRaWAN/App/lora_app.c:1465:6:USER_APP_AUTO_RESPONDER_Parse 47
|
||||
D:/ONEDRIVE/STM32WLV13/Projects/NUCLEO-WL55JC/Applications/LoRaWAN/STS_RR_R125/LoRaWAN/App/lora_app.c:688:13:OnRxData 17
|
||||
Binary file not shown.
File diff suppressed because it is too large
Load Diff
Reference in New Issue