O7/Core/Inc/main.h

/* USER CODE BEGIN Header */
/**
  ******************************************************************************
  * @file           : main.h
  * @brief          : Header for main.c file.
  *                   This file contains the common defines of the application.
  ******************************************************************************
  * @attention
  *
  * Copyright (c) 2021 STMicroelectronics.
  * All rights reserved.
  *
  * This software is licensed under terms that can be found in the LICENSE file
  * in the root directory of this software component.
  * If no LICENSE file comes with this software, it is provided AS-IS.
  *
  ******************************************************************************
  */
/* USER CODE END Header */

/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __MAIN_H
#define __MAIN_H

#ifdef __cplusplus
extern "C" {
#endif

/* Includes ------------------------------------------------------------------*/
#include "stm32wlxx_hal.h"

/* Private includes ----------------------------------------------------------*/
/* USER CODE BEGIN Includes */
#include "platform.h"
/* USER CODE END Includes */

/* Exported types ------------------------------------------------------------*/
/* USER CODE BEGIN ET */

/* USER CODE END ET */

/* Exported constants --------------------------------------------------------*/
/* USER CODE BEGIN EC */

/* USER CODE END EC */

/* Exported macro ------------------------------------------------------------*/
/* USER CODE BEGIN EM */

/* USER CODE END EM */

/* Exported functions prototypes ---------------------------------------------*/
void Error_Handler(void);

/* USER CODE BEGIN EFP */

/* USER CODE END EFP */

/* Private defines -----------------------------------------------------------*/
#define RTC_N_PREDIV_S 10
#define RTC_PREDIV_S ((1<<RTC_N_PREDIV_S)-1)
#define RTC_PREDIV_A ((1<<(15-RTC_N_PREDIV_S))-1)
#if	defined(STM32WL55xx)
#define LED1_Pin GPIO_PIN_15
#define LED1_GPIO_Port GPIOB
#define LED2_Pin GPIO_PIN_9
#define LED2_GPIO_Port GPIOB
#define LED3_Pin GPIO_PIN_11
#define LED3_GPIO_Port GPIOB
#define PROB2_Pin GPIO_PIN_13
#define PROB2_GPIO_Port GPIOB
#define PROB1_Pin GPIO_PIN_12
#define PROB1_GPIO_Port GPIOB
#endif

#define LED1_Pin 						GPIO_PIN_2
#define LED1_GPIO_Port 					GPIOB

#define LED1_ON			HAL_GPIO_WritePin(LED1_GPIO_Port, LED1_Pin, GPIO_PIN_SET )
#define LED1_OFF		HAL_GPIO_WritePin(LED1_GPIO_Port, LED1_Pin, GPIO_PIN_RESET)
#define LED1_STATE		HAL_GPIO_ReadPin(LED1_GPIO_Port, LED1_Pin)
#define LED1_TOGGLE		HAL_GPIO_TogglePin(LED1_GPIO_Port, LED1_Pin)
#define MEMS_POWER_Pin							GPIO_PIN_4				// PMU_ENABLE
#define MEMS_POWER_GPIO_Port 					GPIOB					// PMU_ENABLE

#define MEMS_RESET_Pin							GPIO_PIN_4
#define MEMS_RESET_GPIO_Port 					GPIOB

#define PME_ON	HAL_GPIO_WritePin(MEMS_POWER_GPIO_Port, MEMS_POWER_Pin, GPIO_PIN_SET )
#define PME_OFF	HAL_GPIO_WritePin(MEMS_POWER_GPIO_Port, MEMS_POWER_Pin, GPIO_PIN_RESET )

#ifdef STS_O7

#define HALL1_Pin 				GPIO_PIN_0			// DOOR CONTACT
#define HALL1_GPIO_Port 		GPIOA
#define HALL1_EXTI_IRQn 		EXTI0_IRQn

#define HALL2_Pin 				GPIO_PIN_1			// EMERGENCY BUTTON OR SOS BUTTON
#define HALL2_GPIO_Port 		GPIOA
#define HALL2_EXTI_IRQn 		EXTI1_IRQn

#define	HALL1_STATE						HAL_GPIO_ReadPin(HALL1_GPIO_Port, HALL1_Pin)
#define HALL2_STATE						HAL_GPIO_ReadPin(HALL2_GPIO_Port, HALL2_Pin)


#else
#define BUT1_Pin GPIO_PIN_0
#define BUT1_GPIO_Port GPIOA
#define BUT1_EXTI_IRQn EXTI0_IRQn

#define BUT2_Pin GPIO_PIN_1
#define BUT2_GPIO_Port GPIOA
#define BUT2_EXTI_IRQn EXTI1_IRQn
#endif

//#if	defined(STM32WL55xx)
#define BUT3_Pin GPIO_PIN_6
#define BUT3_GPIO_Port GPIOC
#define BUT3_EXTI_IRQn EXTI9_5_IRQn
//#endif

#define USARTx_RX_Pin GPIO_PIN_3
#define USARTx_RX_GPIO_Port GPIOA
#define USARTx_TX_Pin GPIO_PIN_2
#define USARTx_TX_GPIO_Port GPIOA

/* USER CODE BEGIN Private defines */
/*
 * STM32WL55, STM32WLE5 Clock=48Mhz 48,000,000/800khz = 60
 */
#define STS_LAMP_BAR_PWM_TIM_PERIOD     (60 - 1)
#define STS_LAMP_BAR_HTIM               htim1
#define STS_LAMP_BAR_LED_NUM            (30)	//50

#define WSDATA_PORT_PIN_PA8
//#define WSDATA_PORT_PIN_PA9

#ifdef WSDATA_PORT_PIN_PA8
#define STS_LAMP_BAR_TIM_CHANNEL        TIM_CHANNEL_1
#define STS_LAMP_BAR_WSDATA_PIN			GPIO_PIN_8
#define STS_LAMP_BAR_WSDATA_PORT		GPIOA
#elif defined(WSDATA_PORT_PIN_PA9)
#define STS_LAMP_BAR_TIM_CHANNEL        TIM_CHANNEL_2
#define STS_LAMP_BAR_WSDATA_PIN			GPIO_PIN_9
#define STS_LAMP_BAR_WSDATA_PORT		GPIOA
#endif


#define	STS_SERVICE_MASK_L0		(0)		// Service normal , no mask off
#define	STS_SERVICE_MASK_L1		(1)		// service mask level 1, sensing data upload in silence mode, node appearance silence (no LED, No display, no sound, no vibration)
#define	STS_SERVICE_MASK_L2		(2)		// service mask level 2, NO sensing data upload (event or periodicity)
#define	STS_SERVICE_MASK_L3		(3)		// service mask level 3, NO responsing to cloud control command, or config change/responding, EXCEPT STS_SERVICE_MASK_ON_OFF cmd
//#define	STS_SERVICE_MASK_L4		(1<<4)		// service mask level 4, level 3 + node states heart-beat(predefined long periodicity off), EXCEPT STS_SERVICE_MASK_ON_OFF cmd


/*
#define A111_SPI_MOSI_Pin GPIO_PIN_12
#define A111_SPI_MOSI_GPIO_Port GPIOA
#define A111_CS_N_Pin GPIO_PIN_15
#define A111_CS_N_GPIO_Port GPIOA
#define A111_SPI_MISO_Pin GPIO_PIN_11
#define A111_SPI_MISO_GPIO_Port GPIOA
#define A111_SPI_SCK_Pin GPIO_PIN_3
#define A111_SPI_SCK_GPIO_Port GPIOB
#define A111_ENABLE_Pin GPIO_PIN_5
#define A111_ENABLE_GPIO_Port GPIOB
#define A111_SENSOR_INTERRUPT_Pin GPIO_PIN_8
#define A111_SENSOR_INTERRUPT_GPIO_Port GPIOA
#define A111_SENSOR_INTERRUPT_EXTI_IRQn EXTI9_5_IRQn
*/

#define A111_SPI_SCK_Pin 		GPIO_PIN_5							//GPIO_PIN_3
#define A111_SPI_SCK_GPIO_Port 	GPIOA								//GPIOB
#define A111_SPI_MISO_Pin 		GPIO_PIN_6							//GPIO_PIN_11
#define A111_SPI_MISO_GPIO_Port GPIOA								//GPIOA
#define A111_SPI_MOSI_Pin 		GPIO_PIN_7							//GPIO_PIN_12
#define A111_SPI_MOSI_GPIO_Port GPIOA								//GPIOA
#define A111_CS_N_Pin 			GPIO_PIN_4							//GPIO_PIN_15
#define A111_CS_N_GPIO_Port 	GPIOA								//GPIOA
#ifdef STM32WL55
#define A111_SENSOR_INTERRUPT_Pin 			GPIO_PIN_8
#define A111_SENSOR_INTERRUPT_GPIO_Port 	GPIOA
#define A111_SENSOR_INTERRUPT_EXTI_IRQn 	EXTI9_5_IRQn
#define A111_ENABLE_Pin 		GPIO_PIN_5
#define A111_ENABLE_GPIO_Port 	GPIOB
#endif

#if	defined(YUNHORN_STS_WLE5CCxx) && defined(RM2)
#define A111_SENSOR_INTERRUPT_Pin 			GPIO_PIN_5
#define A111_SENSOR_INTERRUPT_GPIO_Port 	GPIOB
#define A111_SENSOR_INTERRUPT_EXTI_IRQn 	EXTI9_5_IRQn
#define A111_ENABLE_Pin 					GPIO_PIN_3
#define A111_ENABLE_GPIO_Port 				GPIOB
#endif

#if	defined(YUNHORN_STS_WLE5CCxx) && defined(RM2_1)
#define A111_SENSOR_INTERRUPT_Pin 			GPIO_PIN_3				// SWITCH TO PB-3, 2024-05-06
#define A111_SENSOR_INTERRUPT_GPIO_Port 	GPIOB
#define A111_SENSOR_INTERRUPT_EXTI_IRQn 	EXTI3_IRQn				// SWITCH TO PB-3, 2024-05-06
#define A111_ENABLE_Pin 					GPIO_PIN_5							// SWITCH TO PB-5, 2024-05-06
#define A111_ENABLE_GPIO_Port 				GPIOB
#endif


#define A111_SPI_HANDLE 		hspi1
#ifndef	A111_USE_SPI_DMA
#define A111_USE_SPI_DMA
#endif



/* USER CODE END Private defines */

#ifdef __cplusplus
}
#endif

#endif /* __MAIN_H */