update for self function test result 16 to 18

Core/Inc/sys_conf.h

@@ -50,12 +50,12 @@ extern "C" {
   * #define VLEVEL_M 2       functional traces
   * #define VLEVEL_H 3       all traces
   */
-#define VERBOSE_LEVEL                        VLEVEL_OFF
+#define VERBOSE_LEVEL                        VLEVEL_M
 
 /**
   * @brief Enable trace logs
   */
-#define APP_LOG_ENABLED                      0
+#define APP_LOG_ENABLED                      1
 
 /**
   * @brief Activate monitoring (probes) of some internal RF signals for debug purpose
@@ -78,7 +78,7 @@ extern "C" {
   * @brief Enable/Disable MCU Debugger pins (dbg serial wires)
   * @note  by HW serial wires are ON by default, need to put them OFF to save power
   */
-#define DEBUGGER_ENABLED                     0
+#define DEBUGGER_ENABLED                     1
 
 /**
   * @brief Disable Low Power mode

Core/Src/yunhorn_sts_process.c

@@ -1097,7 +1097,7 @@ void STS_PRESENCE_SENSOR_Background_Measure_Process(uint16_t *bg_distance, uint1
 
 void STS_PRESENCE_SENSOR_Function_Test_Process(uint8_t *self_test_result, uint8_t count)
 {
-	uint8_t bring_up_result[16];
+	uint8_t bring_up_result[18]={0};
 	uint8_t previous_lamp_bar_color=sts_lamp_bar_color;
 	uint16_t bg_range=0, bg_noise=0;
 	PME_ON;
@@ -1117,16 +1117,16 @@ void STS_PRESENCE_SENSOR_Function_Test_Process(uint8_t *self_test_result, uint8_
 		HAL_Delay(200);
 		sts_lamp_bar_color = STS_CYAN;
 		STS_PRESENCE_SENSOR_Distance_Measure_Process();
-		bring_up_result[10]=sts_sensor_install_height>>8&0xff;
-		bring_up_result[11]=sts_sensor_install_height&0xff;
+		bring_up_result[12]=sts_sensor_install_height>>8&0xff;
+		bring_up_result[13]=sts_sensor_install_height&0xff;
 
 		HAL_Delay(200);
 
 		STS_PRESENCE_SENSOR_Background_Measure_Process(&bg_range, &bg_noise);
-		bring_up_result[12]=bg_range>>8&0xff;
-		bring_up_result[13]=bg_range&0xff;
-		bring_up_result[14]=bg_noise>>8&0xff;
-		bring_up_result[15]=bg_noise&0xff;
+		bring_up_result[14]=bg_range>>8&0xff;
+		bring_up_result[15]=bg_range&0xff;
+		bring_up_result[16]=bg_noise>>8&0xff;
+		bring_up_result[17]=bg_noise&0xff;
 
 
 	}

LoRaWAN/App/lora_app.c

@@ -3146,13 +3146,13 @@ void STS_SENSOR_Function_Test_Process(void)
 	}
 	else
 	{
-		tstbuf[i++] = (uint8_t)16; 	//length of following data 16 bytes
+		tstbuf[i++] = (uint8_t)18; 	//length of following data 16 bytes
 #if	defined(STS_O7)||defined(STS_O6)
-		uint8_t self_test_result[16]={0x0};
+		uint8_t self_test_result[18]={0x0};
 
 		STS_PRESENCE_SENSOR_Function_Test_Process(self_test_result, count);
 
-		for (uint8_t j=0; j < 16; j++)
+		for (uint8_t j=0; j < 18; j++)
 			tstbuf[i++] = (uint8_t) (self_test_result[j])&0xff;
 
 		//STS_PRESENCE_SENSOR_Distance_Measure_Process();