try switch PB3/PB5

Core/Inc/main.h

@@ -79,8 +79,8 @@ void Error_Handler(void);
 #define MEMS_RESET_Pin							GPIO_PIN_4
 #define MEMS_RESET_GPIO_Port 					GPIOB
 
-#define PME_ON	HAL_GPIO_WritePin(MEMS_RESET_GPIO_Port, MEMS_POWER_Pin, GPIO_PIN_SET )
+#define PME_ON	HAL_GPIO_WritePin(MEMS_POWER_GPIO_Port, MEMS_POWER_Pin, GPIO_PIN_SET )
-#define PME_OFF	HAL_GPIO_WritePin(MEMS_RESET_GPIO_Port, MEMS_POWER_Pin, GPIO_PIN_RESET )
+#define PME_OFF	HAL_GPIO_WritePin(MEMS_POWER_GPIO_Port, MEMS_POWER_Pin, GPIO_PIN_RESET )
 
 #ifdef STS_O7
 

Core/Inc/stm32wlxx_it.h

@@ -58,6 +58,7 @@ void SysTick_Handler(void);
 void TAMP_STAMP_LSECSS_SSRU_IRQHandler(void);
 void EXTI0_IRQHandler(void);
 void EXTI1_IRQHandler(void);
+void EXTI3_IRQHandler(void);
 void DMA1_Channel1_IRQHandler(void);
 void DMA1_Channel5_IRQHandler(void);
 void EXTI9_5_IRQHandler(void);

Core/Src/acc_hal_integration_a111.c

@@ -122,6 +122,7 @@ static void acc_hal_integration_sensor_transfer(acc_sensor_id_t sensor_id, uint8
 static void acc_hal_integration_sensor_power_on(acc_sensor_id_t sensor_id)
 {
 	(void)sensor_id;  // Ignore parameter sensor_id
+
 	HAL_GPIO_WritePin(A111_ENABLE_GPIO_Port, A111_ENABLE_Pin, GPIO_PIN_SET);
 	HAL_GPIO_WritePin(A111_CS_N_GPIO_Port, A111_CS_N_Pin, GPIO_PIN_SET);
 

Core/Src/gpio.c

@@ -63,14 +63,14 @@ void MX_GPIO_Init(void)
 
   GPIO_InitStruct.Pin = MEMS_POWER_Pin;
   GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
-  GPIO_InitStruct.Pull = GPIO_NOPULL;
+  GPIO_InitStruct.Pull = GPIO_PULLDOWN;
-  GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
+  GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
   HAL_GPIO_Init(MEMS_POWER_GPIO_Port, &GPIO_InitStruct);
 
   /*Configure GPIO pin : PtPin */
   GPIO_InitStruct.Pin = A111_ENABLE_Pin;
   GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
-  GPIO_InitStruct.Pull = GPIO_NOPULL;
+  GPIO_InitStruct.Pull = GPIO_PULLDOWN;
   GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
   HAL_GPIO_Init(A111_ENABLE_GPIO_Port, &GPIO_InitStruct);
 
@@ -130,13 +130,13 @@ void MX_GPIO_Init(void)
 
   HAL_NVIC_SetPriority(EXTI1_IRQn, 0, 0);
   HAL_NVIC_EnableIRQ(EXTI1_IRQn);
-#endif
+
   HAL_NVIC_SetPriority(EXTI9_5_IRQn, 0, 0);
   HAL_NVIC_EnableIRQ(EXTI9_5_IRQn);
 
   HAL_NVIC_SetPriority(EXTI3_IRQn, 0, 0);
   HAL_NVIC_EnableIRQ(EXTI3_IRQn);
-
+#endif
 }
 
 /* USER CODE BEGIN 2 */

Core/Src/main.c

@@ -102,6 +102,11 @@ int main(void)
 
   MX_LoRaWAN_Init();
 
+  do
+  {
+    STS_SENSOR_Function_Test_Process();
+  } while(0);
+
   STS_Lamp_Bar_Self_Test_Simple();
 
   /* USER CODE BEGIN 2 */

Core/Src/yunhorn_sts_presence_sensor.c

@@ -517,6 +517,7 @@ uint8_t STS_SENSOR_MEMS_Get_ID(uint8_t *devID)
 	{
 		devID[0] = scanned_id[0];
 		devID[1] = scanned_id[1];
+		APP_LOG(TS_OFF, VLEVEL_H,"\r\n--------------devID = %02x %02x \r\n",devID[0], devID[1]);
 		return true;
 	}
 	else

STM32CubeIDE/.cproject

@@ -153,7 +153,7 @@
 								<option id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.optimization.level.1119592399" name="Optimization level" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.optimization.level" useByScannerDiscovery="false" value="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.optimization.level.value.os" valueType="enumerated"/>
 								<option IS_BUILTIN_EMPTY="false" IS_VALUE_EMPTY="false" id="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.definedsymbols.2024044405" name="Define symbols (-D)" superClass="com.st.stm32cube.ide.mcu.gnu.managedbuild.tool.c.compiler.option.definedsymbols" useByScannerDiscovery="false" valueType="definedSymbols">
 									<listOptionValue builtIn="false" value="CORE_CM4"/>
-									<listOptionValue builtIn="false" value="RM2"/>
+									<listOptionValue builtIn="false" value="RM2_1"/>
 									<listOptionValue builtIn="false" value="LOG_RSS"/>
 									<listOptionValue builtIn="false" value="STS_O7"/>
 									<listOptionValue builtIn="false" value="YUNHORN_STS_RANDOM"/>