// Copyright (c) Acconeer AB, 2018-2021 // All rights reserved #ifndef ACC_SERVICE_POWER_BINS_H_ #define ACC_SERVICE_POWER_BINS_H_ #include #include #include "acc_service.h" /** * @defgroup Power Power Bins Service * @ingroup Services * * @brief Power Bins service API description * * @{ */ /** * @brief Metadata for the power bins service */ typedef struct { /** Start of sweep, derived from request set by @ref acc_service_requested_start_set */ float start_m; /** Length of sweep, derived from request set by @ref acc_service_requested_length_set */ float length_m; /** Number of elements in the power bins data array */ uint16_t bin_count; /** Number of stitches in the data */ uint16_t stitch_count; /** Distance between adjacent data points */ float step_length_m; } acc_service_power_bins_metadata_t; /** * @brief Metadata for each result provided by the power bins service */ typedef struct { /** Indication of missed data from the sensor */ bool missed_data; /** Indication of a sensor communication error, service probably needs to be restarted */ bool sensor_communication_error; /** Indication of sensor data being saturated, can cause result instability */ bool data_saturated; /** Indication of bad data quality that may be addressed by restarting the service to recalibrate the sensor */ bool data_quality_warning; } acc_service_power_bins_result_info_t; /** * @brief Create a configuration for a power bins service * * A configuration is created for the power bins service and populated * with default values. * * @return Service configuration, NULL if creation was not possible */ acc_service_configuration_t acc_service_power_bins_configuration_create(void); /** * @brief Destroy a power bins configuration * * Destroy a power bins configuration that is no longer needed, may be done even if a * service has been created with the specific configuration and has not yet been destroyed. * The service configuration reference is set to NULL after destruction. * * @param[in] service_configuration The configuration to destroy, set to NULL */ void acc_service_power_bins_configuration_destroy(acc_service_configuration_t *service_configuration); /** * @brief Get the sensor downsampling factor * * Gets the downsampling factor - the number of steps taken between each data point. A downsampling factor of 1 samples * every possible point in the range. A downsampling factor of 2 samples every other point, and so on. * * @param[in] service_configuration The configuration to get downsampling factor from * @return The downsampling factor */ uint16_t acc_service_power_bins_downsampling_factor_get(acc_service_configuration_t service_configuration); /** * @brief Set the sensor downsampling factor * * Sets the downsampling factor - the number of steps taken between each data point. A downsampling factor of 1 samples * every possible point in the range. A downsampling factor of 2 samples every other point, and so on. * * The power bins service supports a downsampling factor of 1, 2, or 4. * * In power bins, the downsampling factor does not affect the resulting data length. * * @param[in] service_configuration The configuration to set downsampling factor in * @param[in] downsampling_factor The downsampling factor */ void acc_service_power_bins_downsampling_factor_set(acc_service_configuration_t service_configuration, uint16_t downsampling_factor); /** * @brief Get the requested bin count * * @param[in] service_configuration The service configuration to get the requested bin count from * @return Requested bin count */ uint16_t acc_service_power_bins_requested_bin_count_get(acc_service_configuration_t service_configuration); /** * @brief Set the requested bin count * * @param[in] service_configuration The service configuration to set the requested bin count in * @param[in] requested_bin_count The requested bin count */ void acc_service_power_bins_requested_bin_count_set(acc_service_configuration_t service_configuration, uint16_t requested_bin_count); /** * @brief Get if noise level normalization will be done or not * * The purpose of the noise level normalization is to scale the signal according to the * sensor noise level to decrease the signal amplitude variation between individual sensors. * * @param[in] service_configuration The configuration to get the noise level normalization setting for * @return The noise level normalization flag */ bool acc_service_power_bins_noise_level_normalization_get(acc_service_configuration_t service_configuration); /** * @brief Set if noise level normalization should be done or not * * This function controls if a noise level normalization will be done at the beginning * of the processing. * * The purpose of the noise level normalization is to scale the signal according to the * sensor noise level to decrease the signal amplitude variation between individual sensors. * * @param[in] service_configuration The configuration to enable or disable the noise level normalization for * @param[in] noise_level_normalization Flag to determine if noise level normalization should be done or not */ void acc_service_power_bins_noise_level_normalization_set(acc_service_configuration_t service_configuration, bool noise_level_normalization); /** * @brief Get service metadata * * Each service provide metadata after being created with information that could be relevant for an application. * The metadata contain information such as data length and actual start and length. * * May only be called after a service has been created. * * @param[in] handle The service handle for the service to get metadata for * @param[out] metadata Metadata results are provided in this parameter */ void acc_service_power_bins_get_metadata(acc_service_handle_t handle, acc_service_power_bins_metadata_t *metadata); /** * @brief Retrieve the next result from the service * * May only be called after a service has been activated to retrieve the next result, blocks * the application until a result is ready. * * @param[in] handle The service handle for the service to get the next result for * @param[out] data Power bins result * @param[in] data_length The length of the buffer provided for the result * @param[out] result_info Power Bins result info, sending in NULL is ok * @return True if successful, false otherwise */ bool acc_service_power_bins_get_next(acc_service_handle_t handle, uint16_t *data, uint16_t data_length, acc_service_power_bins_result_info_t *result_info); /** * @brief Retrieve the next result from the service * * May only be called after a service has been activated to retrieve the next result, blocks * the application until a result is ready. * * The provided memory is only valid until the next call to get_next for the * specified handle. The memory is specific for the handle and cannot be shared * between handles/services. * * The length of the resulting data is provided in @ref acc_service_power_bins_get_metadata * * @param[in] handle The service handle for the service to get the next result for * @param[out] data Reference to Power Bins result * @param[out] result_info Power Bins result info, sending in NULL is ok * @return True if successful, false otherwise */ bool acc_service_power_bins_get_next_by_reference(acc_service_handle_t handle, uint16_t **data, acc_service_power_bins_result_info_t *result_info); /** * @brief Execute service one time * * Activates service, produces one result and then deactivates the service. Blocks the * application until a service result has been produced. May fail if the service is already active. * * @param[in] handle The service handle for the service to execute * @param[out] data Power bins result * @param[in] data_length The length of the buffer provided for the result * @param[out] result_info Power Bins result info, sending in NULL is ok * @return True if successful, false otherwise */ bool acc_service_power_bins_execute_once(acc_service_handle_t handle, uint16_t *data, uint16_t data_length, acc_service_power_bins_result_info_t *result_info); /** * @} */ #endif