/*!
* \file radio_template.h
*
* \brief Radio driver API definition
*
* \copyright Revised BSD License, see section \ref LICENSE.
*
* \code
* ______ _
* / _____) _ | |
* ( (____ _____ ____ _| |_ _____ ____| |__
* \____ \| ___ | (_ _) ___ |/ ___) _ \
* _____) ) ____| | | || |_| ____( (___| | | |
* (______/|_____)_|_|_| \__)_____)\____)_| |_|
* (C)2013-2017 Semtech
*
* \endcode
*
* \author Miguel Luis ( Semtech )
*
* \author Gregory Cristian ( Semtech )
*/
/**
******************************************************************************
*
* Portions COPYRIGHT 2020 STMicroelectronics
*
* @file radio_template.h
* @author MCD Application Team
* @brief Radio driver API definition
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __RADIO_H__
#define __RADIO_H__
#ifdef __cplusplus
extern "C"
{
#endif
/* Includes ------------------------------------------------------------------*/
#include <stdint.h>
#include <stdbool.h>
/* Private typedef -----------------------------------------------------------*/
/*!
* Radio driver supported modems
*/
typedef enum
{
MODEM_FSK = 0,
MODEM_LORA,
MODEM_BPSK,
MODEM_SIGFOX_TX,
MODEM_SIGFOX_RX,
}RadioModems_t;
/*!
* Radio driver internal state machine states definition
*/
typedef enum
{
RF_IDLE = 0, //!< The radio is idle
RF_RX_RUNNING, //!< The radio is in reception state
RF_TX_RUNNING, //!< The radio is in transmission state
RF_CAD, //!< The radio is doing channel activity detection
}RadioState_t;
/*!
* \brief Radio driver callback functions
*/
typedef struct
{
/*!
* \brief Tx Done callback prototype.
*/
void ( *TxDone )( void );
/*!
* \brief Tx Timeout callback prototype.
*/
void ( *TxTimeout )( void );
/*!
* \brief Rx Done callback prototype.
*
* \param [in] payload Received buffer pointer
* \param [in] size Received buffer size
* \param [in] rssi RSSI value computed while receiving the frame [dBm]
* \param [in] LoraSnr_FskCfo
* FSK : Carrier Frequency Offset in kHz
* LoRa: SNR value in dB
*/
void ( *RxDone )( uint8_t *payload, uint16_t size, int16_t rssi, int8_t LoraSnr_FskCfo );
/*!
* \brief Rx Timeout callback prototype.
*/
void ( *RxTimeout )( void );
/*!
* \brief Rx Error callback prototype.
*/
void ( *RxError )( void );
/*!
* \brief FHSS Change Channel callback prototype.
*
* \param [in] currentChannel Index number of the current channel
*/
void ( *FhssChangeChannel )( uint8_t currentChannel );
/*!
* \brief CAD Done callback prototype.
*
* \param [in] channelDetected Channel Activity detected during the CAD
*/
void ( *CadDone ) ( bool channelActivityDetected );
}RadioEvents_t;
#include "radio_ex.h"
/*!
* \brief Radio driver definition
*/
struct Radio_s
{
/*!
* \brief Initializes the radio
*
* \param [in] events Structure containing the driver callback functions
*/
void ( *Init )( RadioEvents_t *events );
/*!
* Return current radio status
*
* \return status Radio status.[RF_IDLE, RF_RX_RUNNING, RF_TX_RUNNING]
*/
RadioState_t ( *GetStatus )( void );
/*!
* \brief Configures the radio with the given modem
*
* \param [in] modem Modem to be used [0: FSK, 1: LoRa]
*/
void ( *SetModem )( RadioModems_t modem );
/*!
* \brief Sets the channel frequency
*
* \param [in] freq Channel RF frequency
*/
void ( *SetChannel )( uint32_t freq );
/*!
* \brief Checks if the channel is free for the given time
*
* \remark The FSK modem is always used for this task as we can select the Rx bandwidth at will.
*
* \param [in] freq Channel RF frequency in Hertz
* \param [in] rxBandwidth Rx bandwidth in Hertz
* \param [in] rssiThresh RSSI threshold in dBm
* \param [in] maxCarrierSenseTime Max time in milliseconds while the RSSI is measured
*
* \retval isFree [true: Channel is free, false: Channel is not free]
*/
bool ( *IsChannelFree )( uint32_t freq, uint32_t rxBandwidth, int16_t rssiThresh, uint32_t maxCarrierSenseTime );
/*!
* \brief Generates a 32 bits random value based on the RSSI readings
*
* \remark This function sets the radio in LoRa modem mode and disables
* all interrupts.
* After calling this function either Radio.SetRxConfig or
* Radio.SetTxConfig functions must be called.
*
* \retval randomValue 32 bits random value
*/
uint32_t ( *Random )( void );
/*!
* \brief Sets the reception parameters
*
* \param [in] modem Radio modem to be used [0: FSK, 1: LoRa]
* \param [in] bandwidth Sets the bandwidth
* FSK : >= 2600 and <= 250000 Hz
* LoRa: [0: 125 kHz, 1: 250 kHz,
* 2: 500 kHz, 3: Reserved]
* \param [in] datarate Sets the Datarate
* FSK : 600..300000 bits/s
* LoRa: [6: 64, 7: 128, 8: 256, 9: 512,
* 10: 1024, 11: 2048, 12: 4096 chips]
* \param [in] coderate Sets the coding rate (LoRa only)
* FSK : N/A ( set to 0 )
* LoRa: [1: 4/5, 2: 4/6, 3: 4/7, 4: 4/8]
* \param [in] bandwidthAfc Sets the AFC Bandwidth (FSK only)
* FSK : >= 2600 and <= 250000 Hz
* LoRa: N/A ( set to 0 )
* \param [in] preambleLen Sets the Preamble length
* FSK : Number of bytes
* LoRa: Length in symbols (the hardware adds 4 more symbols)
* \param [in] symbTimeout Sets the RxSingle timeout value
* FSK : timeout in number of bytes
* LoRa: timeout in symbols
* \param [in] fixLen Fixed length packets [0: variable, 1: fixed]
* \param [in] payloadLen Sets payload length when fixed length is used
* \param [in] crcOn Enables/Disables the CRC [0: OFF, 1: ON]
* \param [in] freqHopOn Enables disables the intra-packet frequency hopping
* FSK : N/A ( set to 0 )
* LoRa: [0: OFF, 1: ON]
* \param [in] hopPeriod Number of symbols between each hop
* FSK : N/A ( set to 0 )
* LoRa: Number of symbols
* \param [in] iqInverted Inverts IQ signals (LoRa only)
* FSK : N/A ( set to 0 )
* LoRa: [0: not inverted, 1: inverted]
* \param [in] rxContinuous Sets the reception in continuous mode
* [false: single mode, true: continuous mode]
*/
void ( *SetRxConfig )( RadioModems_t modem, uint32_t bandwidth,
uint32_t datarate, uint8_t coderate,
uint32_t bandwidthAfc, uint16_t preambleLen,
uint16_t symbTimeout, bool fixLen,
uint8_t payloadLen,
bool crcOn, bool freqHopOn, uint8_t hopPeriod,
bool iqInverted, bool rxContinuous );
/*!
* \brief Sets the transmission parameters
*
* \param [in] modem Radio modem to be used [0: FSK, 1: LoRa]
* \param [in] power Sets the output power [dBm]
* \param [in] fdev Sets the frequency deviation (FSK only)
* FSK : [Hz]
* LoRa: 0
* \param [in] bandwidth Sets the bandwidth (LoRa only)
* FSK : 0
* LoRa: [0: 125 kHz, 1: 250 kHz,
* 2: 500 kHz, 3: Reserved]
* \param [in] datarate Sets the Datarate
* FSK : 600..300000 bits/s
* LoRa: [6: 64, 7: 128, 8: 256, 9: 512,
* 10: 1024, 11: 2048, 12: 4096 chips]
* \param [in] coderate Sets the coding rate (LoRa only)
* FSK : N/A ( set to 0 )
* LoRa: [1: 4/5, 2: 4/6, 3: 4/7, 4: 4/8]
* \param [in] preambleLen Sets the preamble length
* FSK : Number of bytes
* LoRa: Length in symbols (the hardware adds 4 more symbols)
* \param [in] fixLen Fixed length packets [0: variable, 1: fixed]
* \param [in] crcOn Enables disables the CRC [0: OFF, 1: ON]
* \param [in] freqHopOn Enables disables the intra-packet frequency hopping
* FSK : N/A ( set to 0 )
* LoRa: [0: OFF, 1: ON]
* \param [in] hopPeriod Number of symbols between each hop
* FSK : N/A ( set to 0 )
* LoRa: Number of symbols
* \param [in] iqInverted Inverts IQ signals (LoRa only)
* FSK : N/A ( set to 0 )
* LoRa: [0: not inverted, 1: inverted]
* \param [in] timeout Transmission timeout [ms]
*/
void ( *SetTxConfig )( RadioModems_t modem, int8_t power, uint32_t fdev,
uint32_t bandwidth, uint32_t datarate,
uint8_t coderate, uint16_t preambleLen,
bool fixLen, bool crcOn, bool freqHopOn,
uint8_t hopPeriod, bool iqInverted, uint32_t timeout );
/*!
* \brief Checks if the given RF frequency is supported by the hardware
*
* \param [in] frequency RF frequency to be checked
* \retval isSupported [true: supported, false: unsupported]
*/
bool ( *CheckRfFrequency )( uint32_t frequency );
/*!
* \brief Computes the packet time on air in ms for the given payload
*
* \remark Can only be called once SetRxConfig or SetTxConfig have been called
*
* \param [in] modem Radio modem to be used [0: FSK, 1: LoRa]
* \param [in] bandwidth Sets the bandwidth
* FSK : >= 2600 and <= 250000 Hz
* LoRa: [0: 125 kHz, 1: 250 kHz,
* 2: 500 kHz, 3: Reserved]
* \param [in] datarate Sets the Datarate
* FSK : 600..300000 bits/s
* LoRa: [6: 64, 7: 128, 8: 256, 9: 512,
* 10: 1024, 11: 2048, 12: 4096 chips]
* \param [in] coderate Sets the coding rate (LoRa only)
* FSK : N/A ( set to 0 )
* LoRa: [1: 4/5, 2: 4/6, 3: 4/7, 4: 4/8]
* \param [in] preambleLen Sets the Preamble length
* FSK : Number of bytes
* LoRa: Length in symbols (the hardware adds 4 more symbols)
* \param [in] fixLen Fixed length packets [0: variable, 1: fixed]
* \param [in] payloadLen Sets payload length when fixed length is used
* \param [in] crcOn Enables/Disables the CRC [0: OFF, 1: ON]
*
* \retval airTime Computed airTime (ms) for the given packet payload length
*/
uint32_t ( *TimeOnAir )( RadioModems_t modem, uint32_t bandwidth,
uint32_t datarate, uint8_t coderate,
uint16_t preambleLen, bool fixLen, uint8_t payloadLen,
bool crcOn );
/*!
* \brief Sends the buffer of size. Prepares the packet to be sent and sets
* the radio in transmission
*
* \param [in] buffer Buffer pointer
* \param [in] size Buffer size
*/
void ( *Send )( uint8_t *buffer, uint8_t size );
/*!
* \brief Sets the radio in sleep mode
*/
void ( *Sleep )( void );
/*!
* \brief Sets the radio in standby mode
*/
void ( *Standby )( void );
/*!
* \brief Sets the radio in reception mode for the given time
* \param [in] timeout Reception timeout [ms]
* [0: continuous, others timeout]
*/
void ( *Rx )( uint32_t timeout );
/*!
* \brief Start a Channel Activity Detection
*/
void ( *StartCad )( void );
/*!
* \brief Sets the radio in continuous wave transmission mode
*
* \param [in] freq Channel RF frequency
* \param [in] power Sets the output power [dBm]
* \param [in] time Transmission mode timeout [s]
*/
void ( *SetTxContinuousWave )( uint32_t freq, int8_t power, uint16_t time );
/*!
* \brief Reads the current RSSI value
*
* \retval rssiValue Current RSSI value in [dBm]
*/
int16_t ( *Rssi )( RadioModems_t modem );
/*!
* \brief Writes the radio register at the specified address
*
* \param [in] addr Register address
* \param [in] data New register value
*/
void ( *Write )( uint16_t addr, uint8_t data );
/*!
* \brief Reads the radio register at the specified address
*
* \param [in] addr Register address
* \retval data Register value
*/
uint8_t ( *Read )( uint16_t addr );
/*!
* \brief Writes multiple radio registers starting at address
*
* \param [in] addr First Radio register address
* \param [in] buffer Buffer containing the new register's values
* \param [in] size Number of registers to be written
*/
void ( *WriteRegisters )( uint16_t addr, uint8_t *buffer, uint8_t size );
/*!
* \brief Reads multiple radio registers starting at address
*
* \param [in] addr First Radio register address
* \param [out] buffer Buffer where to copy the registers data
* \param [in] size Number of registers to be read
*/
void ( *ReadRegisters )( uint16_t addr, uint8_t *buffer, uint8_t size );
/*!
* \brief Sets the maximum payload length.
*
* \param [in] modem Radio modem to be used [0: FSK, 1: LoRa]
* \param [in] max Maximum payload length in bytes
*/
void ( *SetMaxPayloadLength )( RadioModems_t modem, uint8_t max );
/*!
* \brief Sets the network to public or private. Updates the sync byte.
*
* \remark Applies to LoRa modem only
*
* \param [in] enable if true, it enables a public network
*/
void ( *SetPublicNetwork )( bool enable );
/*!
* \brief Gets the time required for the board plus radio to get out of sleep.[ms]
*
* \retval time Radio plus board wakeup time in ms.
*/
uint32_t ( *GetWakeupTime )( void );
/*!
* \brief Process radio irq
*/
void ( *IrqProcess )( void );
/*!
* \brief Sets the radio in reception mode with Max LNA gain for the given time
*
* \param [in] timeout Reception timeout [ms]
* [0: continuous, others timeout]
*/
void ( *RxBoosted )( uint32_t timeout );
/*!
* \brief Sets the Rx duty cycle management parameters
*
* \param [in] rxTime Structure describing reception timeout value
* \param [in] sleepTime Structure describing sleep timeout value
*/
void ( *SetRxDutyCycle )( uint32_t rxTime, uint32_t sleepTime );
/*!
* @brief Sets the Transmitter in continuous PRBS mode
*
* \remark power and datarate shall be configured prior calling TxPrbs
*/
void ( *TxPrbs )( void );
/*!
* \brief Sets the Transmitter in continuous un-modulated Carrier mode at power dBm
*
* \param [in] power Tx power in dBm
*/
void ( *TxCw )( int8_t power );
/*!
* \brief Sets the reception parameters
*
* \param [in] modem Radio modem to be used [GENERIC_FSK or GENERIC_FSK]
* \param [in] config configuration of receiver
* fsk field to be used if modem =GENERIC_FSK
* lora field to be used if modem =GENERIC_LORA
* \param [in] rxContinuous Sets the reception in continuous mode
* [0: single mode, otherwise continuous mode]
* \param [in] symbTimeout Sets the RxSingle timeout value
* FSK : timeout in number of bytes
* LoRa: timeout in symbols
* \return 0 when no parameters error, -1 otherwise
*/
int32_t ( *RadioSetRxGenericConfig )( GenericModems_t modem, RxConfigGeneric_t* config, uint32_t rxContinuous, uint32_t symbTimeout );
/*!
* \brief Sets the transmission parameters
*
* \param [in] modem Radio modem to be used [GENERIC_FSK or GENERIC_FSK or GENERIC_BPSK]
* \param [in] config configuration of receiver
* fsk field to be used if modem =GENERIC_FSK
* lora field to be used if modem =GENERIC_LORA
* bpsk field to be used if modem =GENERIC_BPSK
* \param [in] power Sets the output power [dBm]
* \param [in] timeout Reception timeout [ms]
* \return 0 when no parameters error, -1 otherwise
*/
int32_t ( *RadioSetTxGenericConfig )( GenericModems_t modem, TxConfigGeneric_t* config, int8_t power, uint32_t timeout );
/*!
* \brief Starts sending long Packet, packet maybe short
*
* \param [in] payload_size total payload size to be sent
* \param [in] timeout in ms
* \param [in] TxLongPacketGetNextChunkCb callback to be implemented on user side to feed partial chunk
* buffer: source buffer allocated by the app
* size: size in bytes to feed
* \return 0 when no parameters error, -1 otherwise
*/
int32_t ( *TransmitLongPacket )( uint16_t payload_size, uint32_t timeout,void (*TxLongPacketGetNextChunkCb) ( uint8_t** buffer, uint8_t buffer_size ) );
/*!
* \brief Starts receiving long Packet, packet maybe short
*
* \param [in] boosted_mode boosted_mode: 0 normal Rx, 1:improved sensitivity
* \param [in] timeout Reception timeout [ms]
* \param [in] RxLongStorePacketChunkCb callback to be implemented on user side to record partial chunk in the application
* buffer: source buffer allocated in the radio driver
* size: size in bytes to record
* \return 0 when no parameters error, -1 otherwise
*/
int32_t ( *ReceiveLongPacket )( uint8_t boosted_mode, uint32_t timeout, void (*RxLongStorePacketChunkCb) ( uint8_t* buffer, uint8_t chunk_size ) );
};
/*!
* \brief Radio driver
*
* \remark This variable is defined and initialized in the specific radio
* board implementation
*/
extern const struct Radio_s Radio;
#ifdef __cplusplus
}
#endif
#endif // __RADIO_H__