/** ****************************************************************************** * @file stm32wlxx_ll_utils.c * @author MCD Application Team * @brief UTILS LL module driver. ****************************************************************************** * @attention * * Copyright (c) 2020 STMicroelectronics. * All rights reserved. * * This software is licensed under terms that can be found in the LICENSE file * in the root directory of this software component. * If no LICENSE file comes with this software, it is provided AS-IS. * ****************************************************************************** */ /* Includes ------------------------------------------------------------------*/ #include "stm32wlxx_ll_utils.h" #include "stm32wlxx_ll_rcc.h" #include "stm32wlxx_ll_system.h" #include "stm32wlxx_ll_pwr.h" #ifdef USE_FULL_ASSERT #include "stm32_assert.h" #else #define assert_param(expr) ((void)0U) #endif /* USE_FULL_ASSERT */ /** @addtogroup STM32WLxx_LL_Driver * @{ */ /** @addtogroup UTILS_LL * @{ */ /* Private types -------------------------------------------------------------*/ /* Private variables ---------------------------------------------------------*/ /* Private constants ---------------------------------------------------------*/ /** @addtogroup UTILS_LL_Private_Constants * @{ */ #define UTILS_MAX_FREQUENCY_SCALE1 48000000U /*!< Maximum frequency for system clock at power scale1, in Hz */ #define UTILS_MAX_FREQUENCY_SCALE2 16000000U /*!< Maximum frequency for system clock at power scale2, in Hz */ /* Defines used for PLL range */ #define UTILS_PLLVCO_INPUT_MIN 2660000U /*!< Frequency min for PLLVCO input, in Hz */ #define UTILS_PLLVCO_INPUT_MAX 16000000U /*!< Frequency max for PLLVCO input, in Hz */ #define UTILS_PLLVCO_OUTPUT_MIN 96000000U /*!< Frequency min for PLLVCO output, in Hz */ #define UTILS_PLLVCO_OUTPUT_MAX 344000000U /*!< Frequency max for PLLVCO output, in Hz */ /* Defines used for HCLK2 frequency check */ #define UTILS_HCLK2_MAX 48000000U /*!< HCLK2 frequency maximum at 48MHz */ /** * @} */ /* Private macros ------------------------------------------------------------*/ /** @addtogroup UTILS_LL_Private_Macros * @{ */ #define IS_LL_UTILS_SYSCLK_DIV(__VALUE__) (((__VALUE__) == LL_RCC_SYSCLK_DIV_1) \ || ((__VALUE__) == LL_RCC_SYSCLK_DIV_2) \ || ((__VALUE__) == LL_RCC_SYSCLK_DIV_3) \ || ((__VALUE__) == LL_RCC_SYSCLK_DIV_4) \ || ((__VALUE__) == LL_RCC_SYSCLK_DIV_5) \ || ((__VALUE__) == LL_RCC_SYSCLK_DIV_6) \ || ((__VALUE__) == LL_RCC_SYSCLK_DIV_8) \ || ((__VALUE__) == LL_RCC_SYSCLK_DIV_10) \ || ((__VALUE__) == LL_RCC_SYSCLK_DIV_16) \ || ((__VALUE__) == LL_RCC_SYSCLK_DIV_32) \ || ((__VALUE__) == LL_RCC_SYSCLK_DIV_64) \ || ((__VALUE__) == LL_RCC_SYSCLK_DIV_128) \ || ((__VALUE__) == LL_RCC_SYSCLK_DIV_256) \ || ((__VALUE__) == LL_RCC_SYSCLK_DIV_512)) #define IS_LL_UTILS_APB1_DIV(__VALUE__) (((__VALUE__) == LL_RCC_APB1_DIV_1) \ || ((__VALUE__) == LL_RCC_APB1_DIV_2) \ || ((__VALUE__) == LL_RCC_APB1_DIV_4) \ || ((__VALUE__) == LL_RCC_APB1_DIV_8) \ || ((__VALUE__) == LL_RCC_APB1_DIV_16)) #define IS_LL_UTILS_APB2_DIV(__VALUE__) (((__VALUE__) == LL_RCC_APB2_DIV_1) \ || ((__VALUE__) == LL_RCC_APB2_DIV_2) \ || ((__VALUE__) == LL_RCC_APB2_DIV_4) \ || ((__VALUE__) == LL_RCC_APB2_DIV_8) \ || ((__VALUE__) == LL_RCC_APB2_DIV_16)) #define IS_LL_UTILS_PLLM_VALUE(__VALUE__) (((__VALUE__) == LL_RCC_PLLM_DIV_1) \ || ((__VALUE__) == LL_RCC_PLLM_DIV_2) \ || ((__VALUE__) == LL_RCC_PLLM_DIV_3) \ || ((__VALUE__) == LL_RCC_PLLM_DIV_4) \ || ((__VALUE__) == LL_RCC_PLLM_DIV_5) \ || ((__VALUE__) == LL_RCC_PLLM_DIV_6) \ || ((__VALUE__) == LL_RCC_PLLM_DIV_7) \ || ((__VALUE__) == LL_RCC_PLLM_DIV_8)) #define IS_LL_UTILS_PLLN_VALUE(__VALUE__) ((6U <= (__VALUE__)) && ((__VALUE__) <= 127U)) #define IS_LL_UTILS_PLLR_VALUE(__VALUE__) (((__VALUE__) == LL_RCC_PLLR_DIV_2) \ || ((__VALUE__) == LL_RCC_PLLR_DIV_3) \ || ((__VALUE__) == LL_RCC_PLLR_DIV_4) \ || ((__VALUE__) == LL_RCC_PLLR_DIV_5) \ || ((__VALUE__) == LL_RCC_PLLR_DIV_6) \ || ((__VALUE__) == LL_RCC_PLLR_DIV_7) \ || ((__VALUE__) == LL_RCC_PLLR_DIV_8)) #define IS_LL_UTILS_PLLVCO_INPUT(__VALUE__) ((UTILS_PLLVCO_INPUT_MIN <= (__VALUE__))\ && ((__VALUE__) <= UTILS_PLLVCO_INPUT_MAX)) #define IS_LL_UTILS_PLLVCO_OUTPUT(__VALUE__) ((UTILS_PLLVCO_OUTPUT_MIN <= (__VALUE__))\ && ((__VALUE__) <= UTILS_PLLVCO_OUTPUT_MAX)) #define IS_LL_UTILS_PLL_FREQUENCY(__VALUE__) ((LL_PWR_GetRegulVoltageScaling() == LL_PWR_REGU_VOLTAGE_SCALE1) ? \ ((__VALUE__) <= UTILS_MAX_FREQUENCY_SCALE1) : \ ((__VALUE__) <= UTILS_MAX_FREQUENCY_SCALE2)) #define COUNTOF(a) (sizeof(a) / sizeof(*(a))) /** * @} */ /* Private function prototypes -----------------------------------------------*/ /** @defgroup UTILS_LL_Private_Functions UTILS Private functions * @{ */ static uint32_t UTILS_GetPLLOutputFrequency(uint32_t PLL_InputFrequency, LL_UTILS_PLLInitTypeDef * UTILS_PLLInitStruct); static ErrorStatus UTILS_EnablePLLAndSwitchSystem(uint32_t SYSCLK_Frequency, LL_UTILS_ClkInitTypeDef * UTILS_ClkInitStruct); static ErrorStatus UTILS_PLL_IsBusy(void); /** * @} */ /* Exported functions --------------------------------------------------------*/ /** @addtogroup UTILS_LL_Exported_Functions * @{ */ /** @addtogroup UTILS_LL_EF_DELAY * @{ */ #if defined(CORE_CM0PLUS) /** * @brief This function configures the Cortex-M SysTick source to have 1ms time base. * @note When a RTOS is used, it is recommended to avoid changing the Systick * configuration by calling this function, for a delay use rather osDelay RTOS service. * @param HCLKFrequency HCLK frequency in Hz * @note HCLK frequency can be calculated thanks to RCC helper macro or function @ref LL_RCC_GetSystemClocksFreq * (HCLK2_Frequency field) * @retval None */ #else /** * @brief This function configures the Cortex-M SysTick source to have 1ms time base. * @note When a RTOS is used, it is recommended to avoid changing the Systick * configuration by calling this function, for a delay use rather osDelay RTOS service. * @param HCLKFrequency HCLK frequency in Hz * @note HCLK frequency can be calculated thanks to RCC helper macro or function @ref LL_RCC_GetSystemClocksFreq * (HCLK1_Frequency field) * @retval None */ #endif /* CORE_CM0PLUS */ void LL_Init1msTick(uint32_t HCLKFrequency) { /* Use frequency provided in argument */ LL_InitTick(HCLKFrequency, 1000); } /** * @brief This function provides accurate delay (in milliseconds) based * on SysTick counter flag * @note When a RTOS is used, it is recommended to avoid using blocking delay * and use rather osDelay service. * @note To respect 1ms timebase, user should call @ref LL_Init1msTick function which * will configure Systick to 1ms * @param Delay specifies the delay time length, in milliseconds. * @retval None */ void LL_mDelay(uint32_t Delay) { __IO uint32_t tmp = SysTick->CTRL; /* Clear the COUNTFLAG first */ uint32_t tmpDelay; /* Add this code to indicate that local variable is not used */ ((void)tmp); tmpDelay = Delay; /* Add a period to guaranty minimum wait */ if (tmpDelay < LL_MAX_DELAY) { tmpDelay ++; } while (tmpDelay != 0U) { if ((SysTick->CTRL & SysTick_CTRL_COUNTFLAG_Msk) != 0U) { tmpDelay --; } } } /** * @} */ /** @addtogroup UTILS_EF_SYSTEM * @brief System Configuration functions * @verbatim =============================================================================== ##### System Configuration functions ##### =============================================================================== [..] System, HCLK1, HCLK2, HCLK3 and APB buses clocks configuration (+) The maximum frequency of the SYSCLK, HCLK1, HCLK3, PCLK1 and PCLK2 is 480000000 Hz. @endverbatim @internal Depending on the device voltage range, the maximum frequency should be adapted accordingly: (++) HCLK3 clock frequency for STM32WL55xx device (++) +--------------------------------------------------------+ (++) | Latency | HCLK3 clock frequency (MHz) | (++) | |--------------------------------------| (++) | | voltage range 1 | voltage range 2 | (++) | | 1.2 V | 1.0 V | (++) |-----------------|-------------------|------------------| (++) |0WS(1 CPU cycles)| 0 < HCLK3 <= 18 | 0 < HCLK3 <= 6 | (++) |-----------------|-------------------|------------------| (++) |1WS(2 CPU cycles)| 18 < HCLK3 <= 36 | 6 < HCLK3 <= 12 | (++) |-----------------|-------------------|------------------| (++) |2WS(3 CPU cycles)| 36 < HCLK3 <= 48 | 12 < HCLK3 <= 16| (++) +--------------------------------------------------------+ @endinternal * @{ */ #if defined(CORE_CM0PLUS) /** * @brief This function sets directly SystemCoreClock CMSIS variable. * @note Variable can be calculated also through SystemCoreClockUpdate function. * @param HCLKFrequency HCLK frequency in Hz (can be calculated thanks to RCC helper macro or function @ref LL_RCC_GetSystemClocksFreq (HCLK2_Frequency field)) * @retval None */ #else /** * @brief This function sets directly SystemCoreClock CMSIS variable. * @note Variable can be calculated also through SystemCoreClockUpdate function. * @param HCLKFrequency HCLK frequency in Hz (can be calculated thanks to RCC helper macro or function @ref LL_RCC_GetSystemClocksFreq (HCLK1_Frequency field)) * @retval None */ #endif /* CORE_CM0PLUS */ void LL_SetSystemCoreClock(uint32_t HCLKFrequency) { /* HCLK clock frequency */ SystemCoreClock = HCLKFrequency; } /** * @brief Update number of Flash wait states in line with new frequency and current voltage range. * @param HCLK3_Frequency HCLK3 frequency * @retval An ErrorStatus enumeration value: * - SUCCESS: Latency has been modified * - ERROR: Latency cannot be modified */ ErrorStatus LL_SetFlashLatency(uint32_t HCLK3_Frequency) { uint32_t timeout; uint32_t getlatency; uint32_t latency; uint8_t index; ErrorStatus status = ERROR; /* Array used for FLASH latency according to HCLK3 Frequency */ /* Flash Clock source (HCLK3) range in MHz with a VCORE is range1 */ const uint32_t UTILS_CLK_SRC_RANGE_VOS1[] = {18000000UL, 36000000UL, UTILS_MAX_FREQUENCY_SCALE1}; /* Flash Clock source (HCLK3) range in MHz with a VCORE is range2 */ const uint32_t UTILS_CLK_SRC_RANGE_VOS2[] = {6000000U, 12000000U, UTILS_MAX_FREQUENCY_SCALE2}; /* Flash Latency range */ const uint32_t UTILS_LATENCY_RANGE[] = {LL_FLASH_LATENCY_0, LL_FLASH_LATENCY_1, LL_FLASH_LATENCY_2}; /* Frequency cannot be equal to 0 */ if (HCLK3_Frequency != 0U) { if (LL_PWR_GetRegulVoltageScaling() == LL_PWR_REGU_VOLTAGE_SCALE1) { /* Frequency cannot be greater than a defined max clock */ if (HCLK3_Frequency <= UTILS_MAX_FREQUENCY_SCALE1) { for (index = 0; index < COUNTOF(UTILS_CLK_SRC_RANGE_VOS1); index++) { if (HCLK3_Frequency <= UTILS_CLK_SRC_RANGE_VOS1[index]) { latency = UTILS_LATENCY_RANGE[index]; status = SUCCESS; break; } } } } else /* SCALE2 */ { /* Frequency cannot be greater than a defined max clock */ if (HCLK3_Frequency <= UTILS_MAX_FREQUENCY_SCALE2) { for (index = 0; index < COUNTOF(UTILS_CLK_SRC_RANGE_VOS2); index++) { if (HCLK3_Frequency <= UTILS_CLK_SRC_RANGE_VOS2[index]) { latency = UTILS_LATENCY_RANGE[index]; status = SUCCESS; break; } } } } if (status != ERROR) { LL_FLASH_SetLatency(latency); /* Check that the new number of wait states is taken into account to access the Flash memory by reading the FLASH_ACR register */ timeout = 2U; do { /* Wait for Flash latency to be updated */ getlatency = LL_FLASH_GetLatency(); timeout--; } while ((getlatency != latency) && (timeout > 0U)); if (getlatency != latency) { status = ERROR; } } } return status; } /** * @brief This function configures system clock with MSI as clock source of the PLL * @note The application needs to ensure that PLL configuration is valid * @note The application needs to ensure that MSI range is valid. * @note The application needs to ensure that BUS prescalers are valid * @note Function is based on the following formula: * - PLL output frequency = (((MSI frequency / PLLM) * PLLN) / PLLR) * - PLLM: ensure that the VCO input frequency ranges from 2.66 to 16 MHz (PLLVCO_input = MSI frequency / PLLM) * - PLLN: ensure that the VCO output frequency is between 96 and 344 MHz (PLLVCO_output = PLLVCO_input * PLLN) * - PLLR: ensure that max frequency at 48000000 Hz is reached (PLLVCO_output / PLLR) * @param UTILS_PLLInitStruct pointer to a @ref LL_UTILS_PLLInitTypeDef structure that contains * the configuration information for the PLL. * @param UTILS_ClkInitStruct pointer to a @ref LL_UTILS_ClkInitTypeDef structure that contains * the configuration information for the BUS prescalers. * @retval An ErrorStatus enumeration value: * - SUCCESS: Max frequency configuration done * - ERROR: Max frequency configuration not done */ ErrorStatus LL_PLL_ConfigSystemClock_MSI(LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct, LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct) { ErrorStatus status = SUCCESS; uint32_t pllrfreq = 0; uint32_t range_sel; uint32_t msi_range; #if defined(DUAL_CORE) uint32_t hclk2freq; #endif /* DUAL_CORE */ /* Check if one of the PLL is enabled */ if (UTILS_PLL_IsBusy() == SUCCESS) { /* Get the current MSI range */ if (LL_RCC_MSI_IsEnabledRangeSelect() == 1U) { range_sel = LL_RCC_MSIRANGESEL_RUN; msi_range = LL_RCC_MSI_GetRange(); switch (msi_range) { case LL_RCC_MSIRANGE_0: /* MSI = 100 KHz */ case LL_RCC_MSIRANGE_1: /* MSI = 200 KHz */ case LL_RCC_MSIRANGE_2: /* MSI = 400 KHz */ case LL_RCC_MSIRANGE_3: /* MSI = 800 KHz */ case LL_RCC_MSIRANGE_4: /* MSI = 1 MHz */ case LL_RCC_MSIRANGE_5: /* MSI = 2 MHz */ /* PLLVCO input frequency is not in the range from 2.66 to 16 MHz*/ status = ERROR; break; case LL_RCC_MSIRANGE_6: /* MSI = 4 MHz */ case LL_RCC_MSIRANGE_7: /* MSI = 8 MHz */ case LL_RCC_MSIRANGE_8: /* MSI = 16 MHz */ case LL_RCC_MSIRANGE_9: /* MSI = 24 MHz */ case LL_RCC_MSIRANGE_10: /* MSI = 32 MHz */ case LL_RCC_MSIRANGE_11: /* MSI = 48 MHz */ default: break; } } else { range_sel = LL_RCC_MSIRANGESEL_STANDBY; msi_range = LL_RCC_MSI_GetRangeAfterStandby(); switch (msi_range) { case LL_RCC_MSISRANGE_4: /* MSI = 1 MHz */ case LL_RCC_MSISRANGE_5: /* MSI = 2 MHz */ /* PLLVCO input frequency is not in the range from 2.66 to 16 MHz*/ status = ERROR; break; case LL_RCC_MSISRANGE_7: /* MSI = 8 MHz */ case LL_RCC_MSISRANGE_6: /* MSI = 4 MHz */ default: break; } } /* Calculate PLL output frequency */ if (status != ERROR) { /* Calculate the new PLL output frequency & verify all PLL stages are correct (VCO input ranges, VCO output ranges & SYSCLK max) when assert activated */ pllrfreq = UTILS_GetPLLOutputFrequency(__LL_RCC_CALC_MSI_FREQ(range_sel, msi_range), UTILS_PLLInitStruct); #if defined(DUAL_CORE) /* Check HCLK2 frequency coherency */ hclk2freq = __LL_RCC_CALC_HCLK2_FREQ(pllrfreq, UTILS_ClkInitStruct->CPU2CLKDivider); if (hclk2freq > UTILS_HCLK2_MAX) { /* HCLK2 frequency can not be higher than 48 Mhz */ status = ERROR; } #endif /* DUAL_CORE */ } /* Main PLL configuration and activation */ if (status != ERROR) { /* Enable MSI if not enabled */ if (LL_RCC_MSI_IsReady() != 1U) { LL_RCC_MSI_Enable(); while ((LL_RCC_MSI_IsReady() != 1U)) { /* Wait for MSI ready */ } } /* Configure PLL domain SYS */ LL_RCC_PLL_ConfigDomain_SYS(LL_RCC_PLLSOURCE_MSI, UTILS_PLLInitStruct->PLLM, UTILS_PLLInitStruct->PLLN, UTILS_PLLInitStruct->PLLR); /* Enable PLL and switch system clock to PLL - latency check done internally */ status = UTILS_EnablePLLAndSwitchSystem(pllrfreq, UTILS_ClkInitStruct); } } else { /* Current PLL configuration cannot be modified */ status = ERROR; } return status; } /** * @brief This function configures system clock at maximum frequency with HSI as clock source of the PLL * @note The application needs to ensure that PLL configuration is valid * @note The application needs to ensure that BUS prescalers are valid * @note Function is based on the following formula: * - PLL output frequency = (((HSI frequency / PLLM) * PLLN) / PLLR) * - PLLM: ensure that the VCO input frequency ranges from 2.66 to 16 MHz (PLLVCO_input = HSI frequency / PLLM) * - PLLN: ensure that the VCO output frequency is between 96 and 344 MHz (PLLVCO_output = PLLVCO_input * PLLN) * - PLLR: ensure that max frequency at 48000000 Hz is reach (PLLVCO_output / PLLR) * @param UTILS_PLLInitStruct pointer to a @ref LL_UTILS_PLLInitTypeDef structure that contains * the configuration information for the PLL. * @param UTILS_ClkInitStruct pointer to a @ref LL_UTILS_ClkInitTypeDef structure that contains * the configuration information for the BUS prescalers. * @retval An ErrorStatus enumeration value: * - SUCCESS: Max frequency configuration done * - ERROR: Max frequency configuration not done */ ErrorStatus LL_PLL_ConfigSystemClock_HSI(LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct, LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct) { ErrorStatus status = SUCCESS; uint32_t pllrfreq; #if defined(DUAL_CORE) uint32_t hclk2freq; #endif /* DUAL_CORE */ /* Check if one of the PLL is enabled */ if (UTILS_PLL_IsBusy() == SUCCESS) { /* Calculate the new PLL output frequency */ pllrfreq = UTILS_GetPLLOutputFrequency(HSI_VALUE, UTILS_PLLInitStruct); #if defined(DUAL_CORE) hclk2freq = __LL_RCC_CALC_HCLK2_FREQ(pllrfreq, UTILS_ClkInitStruct->CPU2CLKDivider); /* Check HCLK2 frequency coherency */ if (hclk2freq > UTILS_HCLK2_MAX) { /* HCLK2 frequency can not be higher than 48 Mhz */ status = ERROR; } #endif /* DUAL_CORE */ if (status != ERROR) { /* Enable HSI if not enabled */ if (LL_RCC_HSI_IsReady() != 1U) { LL_RCC_HSI_Enable(); while (LL_RCC_HSI_IsReady() != 1U) { /* Wait for HSI ready */ } } /* Configure PLL */ LL_RCC_PLL_ConfigDomain_SYS(LL_RCC_PLLSOURCE_HSI, UTILS_PLLInitStruct->PLLM, UTILS_PLLInitStruct->PLLN, UTILS_PLLInitStruct->PLLR); /* Enable PLL and switch system clock to PLL */ status = UTILS_EnablePLLAndSwitchSystem(pllrfreq, UTILS_ClkInitStruct); } } else { /* Current PLL configuration cannot be modified */ status = ERROR; } return status; } /** * @brief This function configures system clock with HSE as clock source of the PLL * @note The application needs to ensure that PLL configuration is valid * @note The application needs to ensure that BUS prescalers are valid * @note Function is based on the following formula: * - PLL output frequency = (((HSE frequency / PLLM) * PLLN) / PLLR) * - PLLM: ensure that the VCO input frequency ranges from 2.66 to 16 MHz (PLLVCO_input = HSE frequency / PLLM) * - PLLN: ensure that the VCO output frequency is between 96 and 344 MHz (PLLVCO_output = PLLVCO_input * PLLN) * - PLLR: ensure that max frequency at 48000000 Hz is reached (PLLVCO_output / PLLR) * @param UTILS_PLLInitStruct pointer to a @ref LL_UTILS_PLLInitTypeDef structure that contains * the configuration information for the PLL. * @param UTILS_ClkInitStruct pointer to a @ref LL_UTILS_ClkInitTypeDef structure that contains * the configuration information for the BUS prescalers. * @retval An ErrorStatus enumeration value: * - SUCCESS: Max frequency configuration done * - ERROR: Max frequency configuration not done */ ErrorStatus LL_PLL_ConfigSystemClock_HSE(LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct, LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct) { ErrorStatus status = SUCCESS; uint32_t pllrfreq; #if defined(DUAL_CORE) uint32_t hclk2freq; #endif /* DUAL_CORE */ /* Check if one of the PLL is enabled */ if (UTILS_PLL_IsBusy() == SUCCESS) { /* Calculate the new PLL output frequency */ if (LL_RCC_HSE_IsEnabledDiv2() != 1UL) { pllrfreq = UTILS_GetPLLOutputFrequency(HSE_VALUE, UTILS_PLLInitStruct); } else { /* HSE Pre is set */ pllrfreq = UTILS_GetPLLOutputFrequency(HSE_VALUE/2UL, UTILS_PLLInitStruct); } #if defined(DUAL_CORE) hclk2freq = __LL_RCC_CALC_HCLK2_FREQ(pllrfreq, UTILS_ClkInitStruct->CPU2CLKDivider); /* Check HCLK2 frequency coherency */ if (hclk2freq > UTILS_HCLK2_MAX) { /* HCLK2 frequency can not be higher than 48 Mhz */ status = ERROR; } #endif /* DUAL_CORE */ if (status != ERROR) { /* Enable HSE if not enabled */ if (LL_RCC_HSE_IsReady() != 1U) { /* Enable HSE */ LL_RCC_HSE_Enable(); while (LL_RCC_HSE_IsReady() != 1U) { /* Wait for HSE ready */ } } /* Configure PLL */ LL_RCC_PLL_ConfigDomain_SYS(LL_RCC_PLLSOURCE_HSE, UTILS_PLLInitStruct->PLLM, UTILS_PLLInitStruct->PLLN, UTILS_PLLInitStruct->PLLR); /* Enable PLL and switch system clock to PLL */ status = UTILS_EnablePLLAndSwitchSystem(pllrfreq, UTILS_ClkInitStruct); } } else { /* Current PLL configuration cannot be modified */ status = ERROR; } return status; } /** * @} */ /** * @} */ /** @addtogroup UTILS_LL_Private_Functions * @{ */ /** * @brief Function to check that PLL can be modified * @param PLL_InputFrequency PLL input frequency (in Hz) * @param UTILS_PLLInitStruct pointer to a @ref LL_UTILS_PLLInitTypeDef structure that contains * the configuration information for the PLL. * @retval PLL output frequency (in Hz) */ static uint32_t UTILS_GetPLLOutputFrequency(uint32_t PLL_InputFrequency, LL_UTILS_PLLInitTypeDef *UTILS_PLLInitStruct) { uint32_t pllfreq; /* Check the parameters */ assert_param(IS_LL_UTILS_PLLM_VALUE(UTILS_PLLInitStruct->PLLM)); assert_param(IS_LL_UTILS_PLLN_VALUE(UTILS_PLLInitStruct->PLLN)); assert_param(IS_LL_UTILS_PLLR_VALUE(UTILS_PLLInitStruct->PLLR)); /* Check different PLL parameters according to RM */ /* - PLLM: ensure that the VCO input frequency ranges from 2.66 to 16 MHz. */ pllfreq = PLL_InputFrequency / (((UTILS_PLLInitStruct->PLLM >> RCC_PLLCFGR_PLLM_Pos) + 1U)); assert_param(IS_LL_UTILS_PLLVCO_INPUT(pllfreq)); /* - PLLN: ensure that the VCO output frequency is between 96 and 344 MHz.*/ pllfreq = pllfreq * (UTILS_PLLInitStruct->PLLN & (RCC_PLLCFGR_PLLN >> RCC_PLLCFGR_PLLN_Pos)); assert_param(IS_LL_UTILS_PLLVCO_OUTPUT(pllfreq)); /* - PLLR: ensure that max frequency at 48000000 Hz is reached */ pllfreq = pllfreq / ((UTILS_PLLInitStruct->PLLR >> RCC_PLLCFGR_PLLR_Pos) + 1U); assert_param(IS_LL_UTILS_PLL_FREQUENCY(pllfreq)); return pllfreq; } /** * @brief Function to check that PLL can be modified * @retval An ErrorStatus enumeration value: * - SUCCESS: PLL modification can be done * - ERROR: PLL is busy */ static ErrorStatus UTILS_PLL_IsBusy(void) { ErrorStatus status = SUCCESS; /* Check if PLL is busy*/ if (LL_RCC_PLL_IsReady() != 0U) { /* PLL configuration cannot be modified */ status = ERROR; } return status; } /** * @brief Function to enable PLL and switch system clock to PLL * @param SYSCLK_Frequency SYSCLK frequency * @param UTILS_ClkInitStruct pointer to a @ref LL_UTILS_ClkInitTypeDef structure that contains * the configuration information for the BUS prescalers. * @retval An ErrorStatus enumeration value: * - SUCCESS: No problem to switch system to PLL * - ERROR: Problem to switch system to PLL */ static ErrorStatus UTILS_EnablePLLAndSwitchSystem(uint32_t SYSCLK_Frequency, LL_UTILS_ClkInitTypeDef *UTILS_ClkInitStruct) { ErrorStatus status = SUCCESS; uint32_t hclks_frequency_target; uint32_t hclks_frequency_current; uint32_t sysclk_current; assert_param(IS_LL_UTILS_SYSCLK_DIV(UTILS_ClkInitStruct->CPU1CLKDivider)); #if defined(DUAL_CORE) assert_param(IS_LL_UTILS_SYSCLK_DIV(UTILS_ClkInitStruct->CPU2CLKDivider)); #endif /* DUAL_CORE */ assert_param(IS_LL_UTILS_SYSCLK_DIV(UTILS_ClkInitStruct->AHB3CLKDivider)); assert_param(IS_LL_UTILS_APB1_DIV(UTILS_ClkInitStruct->APB1CLKDivider)); assert_param(IS_LL_UTILS_APB2_DIV(UTILS_ClkInitStruct->APB2CLKDivider)); /* Calculate HCLK3 frequency based on SYSCLK_Frequency target */ hclks_frequency_target = __LL_RCC_CALC_HCLK3_FREQ(SYSCLK_Frequency, UTILS_ClkInitStruct->AHB3CLKDivider); /* Calculate HCLK3 frequency current */ sysclk_current = (SystemCoreClock * AHBPrescTable[(LL_RCC_GetAHBPrescaler() & RCC_CFGR_HPRE) >> RCC_CFGR_HPRE_Pos]); hclks_frequency_current = __LL_RCC_CALC_HCLK3_FREQ(sysclk_current, LL_RCC_GetAHB3Prescaler()); /* Increasing the number of wait states because of higher CPU frequency */ if (hclks_frequency_current < hclks_frequency_target) { /* Set FLASH latency to highest latency */ status = LL_SetFlashLatency(hclks_frequency_target); } /* Update system clock configuration */ if (status == SUCCESS) { /* Enable PLL */ LL_RCC_PLL_Enable(); LL_RCC_PLL_EnableDomain_SYS(); while (LL_RCC_PLL_IsReady() != 1U) { /* Wait for PLL ready */ } /* Sysclk activation on the main PLL */ LL_RCC_SetAHBPrescaler(UTILS_ClkInitStruct->CPU1CLKDivider); #if defined(DUAL_CORE) LL_C2_RCC_SetAHBPrescaler(UTILS_ClkInitStruct->CPU2CLKDivider); #endif /* DUAL_CORE */ LL_RCC_SetAHB3Prescaler(UTILS_ClkInitStruct->AHB3CLKDivider); LL_RCC_SetSysClkSource(LL_RCC_SYS_CLKSOURCE_PLL); while (LL_RCC_GetSysClkSource() != LL_RCC_SYS_CLKSOURCE_STATUS_PLL) { /* Wait for system clock switch to PLL */ } /* Set APB1 & APB2 prescaler*/ LL_RCC_SetAPB1Prescaler(UTILS_ClkInitStruct->APB1CLKDivider); LL_RCC_SetAPB2Prescaler(UTILS_ClkInitStruct->APB2CLKDivider); } /* Decreasing the number of wait states because of lower CPU frequency */ if (hclks_frequency_current > hclks_frequency_target) { /* Set FLASH latency to lowest latency */ status = LL_SetFlashLatency(hclks_frequency_target); } /* Update SystemCoreClock variable */ if (status == SUCCESS) { #if defined(CORE_CM0PLUS) && defined(DUAL_CORE) LL_SetSystemCoreClock(__LL_RCC_CALC_HCLK2_FREQ(SYSCLK_Frequency, UTILS_ClkInitStruct->CPU2CLKDivider)); #else LL_SetSystemCoreClock(__LL_RCC_CALC_HCLK1_FREQ(SYSCLK_Frequency, UTILS_ClkInitStruct->CPU1CLKDivider)); #endif /* CORE_CM0PLUS && DUAL_CORE */ } return status; } /** * @} */ /** * @} */ /** * @} */