/* USER CODE BEGIN Header */ /** ****************************************************************************** * @file FLASH/FLASH_EraseProgram/Src/main.c * @author MCD Application Team * @brief This example provides a description of how to erase and program the * STM32WLxx FLASH. ****************************************************************************** * @attention * * Copyright (c) 2020 STMicroelectronics. * All rights reserved. * * This software is licensed under terms that can be found in the LICENSE file * in the root directory of this software component. * If no LICENSE file comes with this software, it is provided AS-IS. * ****************************************************************************** */ /* USER CODE END Header */ /* Includes ------------------------------------------------------------------*/ #include "main.h" /* Private includes ----------------------------------------------------------*/ /* USER CODE BEGIN Includes */ /* USER CODE END Includes */ /* Private typedef -----------------------------------------------------------*/ /* USER CODE BEGIN PTD */ /* USER CODE END PTD */ /* Private define ------------------------------------------------------------*/ /* USER CODE BEGIN PD */ #define FLASH_USER_START_ADDR ADDR_FLASH_PAGE_16 /* Start @ of user Flash area */ #define FLASH_USER_END_ADDR (ADDR_FLASH_PAGE_127 + FLASH_PAGE_SIZE - 1) /* End @ of user Flash area */ #define DATA_32 ((uint32_t)0x12345678) #define DATA_64 ((uint64_t)0x1234567812345678) /* USER CODE END PD */ /* Private macro -------------------------------------------------------------*/ /* USER CODE BEGIN PM */ /* USER CODE END PM */ /* Private variables ---------------------------------------------------------*/ /* USER CODE BEGIN PV */ uint32_t FirstPage = 0, NbOfPages = 0; uint32_t Address = 0, PageError = 0; __IO uint32_t MemoryProgramStatus = 0; __IO uint32_t data32 = 0; /*Variable used for Erase procedure*/ static FLASH_EraseInitTypeDef EraseInitStruct; /* USER CODE END PV */ /* Private function prototypes -----------------------------------------------*/ void SystemClock_Config(void); /* USER CODE BEGIN PFP */ static uint32_t GetPage(uint32_t Address); /* USER CODE END PFP */ /* Private user code ---------------------------------------------------------*/ /* USER CODE BEGIN 0 */ /* USER CODE END 0 */ /** * @brief The application entry point. * @retval int */ int main(void) { /* USER CODE BEGIN 1 */ /* STM32WLxx HAL library initialization: - Configure the Flash prefetch - Systick timer is configured by default as source of time base, but user can eventually implement his proper time base source (a general purpose timer for example or other time source), keeping in mind that Time base duration should be kept 1ms since PPP_TIMEOUT_VALUEs are defined and handled in milliseconds basis. - Set NVIC Group Priority to 4 - Low Level Initialization */ /* USER CODE END 1 */ /* MCU Configuration--------------------------------------------------------*/ /* Reset of all peripherals, Initializes the Flash interface and the Systick. */ HAL_Init(); /* USER CODE BEGIN Init */ /* Configure the system clock to 48 MHz */ /* USER CODE END Init */ /* Configure the system clock */ SystemClock_Config(); /* USER CODE BEGIN SysInit */ /* USER CODE END SysInit */ /* Initialize all configured peripherals */ /* USER CODE BEGIN 2 */ /* Initialize LED2, LED1 and LED3 */ BSP_LED_Init(LED2); BSP_LED_Init(LED1); BSP_LED_Init(LED3); /* Unlock the Flash to enable the flash control register access *************/ HAL_FLASH_Unlock(); /* Clear OPTVERR bit set on virgin samples */ __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_OPTVERR); /* Erase the user Flash area (area defined by FLASH_USER_START_ADDR and FLASH_USER_END_ADDR) ***********/ /* Get the 1st page to erase */ FirstPage = GetPage(FLASH_USER_START_ADDR); /* Get the number of pages to erase from 1st page */ NbOfPages = GetPage(FLASH_USER_END_ADDR) - FirstPage + 1; /* Fill EraseInit structure*/ EraseInitStruct.TypeErase = FLASH_TYPEERASE_PAGES; EraseInitStruct.Page = FirstPage; EraseInitStruct.NbPages = NbOfPages; /* Note: If an erase operation in Flash memory also concerns data in the data or instruction cache, you have to make sure that these data are rewritten before they are accessed during code execution. If this cannot be done safely, it is recommended to flush the caches by setting the DCRST and ICRST bits in the FLASH_CR register. */ if (HAL_FLASHEx_Erase(&EraseInitStruct, &PageError) != HAL_OK) { /* Error occurred while page erase. User can add here some code to deal with this error. PageError will contain the faulty page and then to know the code error on this page, user can call function 'HAL_FLASH_GetError()' */ /* Infinite loop */ while (1) { /* Turn on LED3 */ BSP_LED_On(LED3); } } /* Program the user Flash area word by word (area defined by FLASH_USER_START_ADDR and FLASH_USER_END_ADDR) ***********/ Address = FLASH_USER_START_ADDR; while (Address < FLASH_USER_END_ADDR) { if (HAL_FLASH_Program(FLASH_TYPEPROGRAM_DOUBLEWORD, Address, DATA_64) == HAL_OK) { Address = Address + 8; /* increment to next double word*/ } else { /* Error occurred while writing data in Flash memory. User can add here some code to deal with this error */ while (1) { /* Turn on LED3 */ BSP_LED_On(LED3); } } } /* Lock the Flash to disable the flash control register access (recommended to protect the FLASH memory against possible unwanted operation) *********/ HAL_FLASH_Lock(); /* Check if the programmed data is OK MemoryProgramStatus = 0: data programmed correctly MemoryProgramStatus != 0: number of words not programmed correctly ******/ Address = FLASH_USER_START_ADDR; MemoryProgramStatus = 0x0; while (Address < FLASH_USER_END_ADDR) { data32 = *(__IO uint32_t *)Address; if (data32 != DATA_32) { MemoryProgramStatus++; } Address = Address + 4; } /*Check if there is an issue to program data*/ if (MemoryProgramStatus == 0) { /* No error detected. Switch on LED2*/ BSP_LED_On(LED2); } else { /* Error detected. Switch on LED1*/ BSP_LED_On(LED1); } /* USER CODE END 2 */ /* Infinite loop */ /* USER CODE BEGIN WHILE */ while (1) { /* USER CODE END WHILE */ /* USER CODE BEGIN 3 */ } /* USER CODE END 3 */ } /** * @brief System Clock Configuration * @retval None */ void SystemClock_Config(void) { RCC_OscInitTypeDef RCC_OscInitStruct = {0}; RCC_ClkInitTypeDef RCC_ClkInitStruct = {0}; /** Configure the main internal regulator output voltage */ __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1); /** Initializes the CPU, AHB and APB buses clocks */ RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_MSI; RCC_OscInitStruct.MSIState = RCC_MSI_ON; RCC_OscInitStruct.MSICalibrationValue = RCC_MSICALIBRATION_DEFAULT; RCC_OscInitStruct.MSIClockRange = RCC_MSIRANGE_8; RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_MSI; RCC_OscInitStruct.PLL.PLLM = RCC_PLLM_DIV4; RCC_OscInitStruct.PLL.PLLN = 24; RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2; RCC_OscInitStruct.PLL.PLLR = RCC_PLLR_DIV2; RCC_OscInitStruct.PLL.PLLQ = RCC_PLLQ_DIV2; if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) { Error_Handler(); } /** Configure the SYSCLKSource, HCLK, PCLK1 and PCLK2 clocks dividers */ RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK3|RCC_CLOCKTYPE_HCLK |RCC_CLOCKTYPE_SYSCLK|RCC_CLOCKTYPE_PCLK1 |RCC_CLOCKTYPE_PCLK2; RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; RCC_ClkInitStruct.AHBCLK3Divider = RCC_SYSCLK_DIV1; if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2) != HAL_OK) { Error_Handler(); } } /* USER CODE BEGIN 4 */ /** * @brief Gets the page of a given address * @param Addr: Address of the FLASH Memory * @retval The page of a given address */ static uint32_t GetPage(uint32_t Addr) { return (Addr - FLASH_BASE) / FLASH_PAGE_SIZE;; } /* USER CODE END 4 */ /** * @brief This function is executed in case of error occurrence. * @retval None */ void Error_Handler(void) { /* USER CODE BEGIN Error_Handler_Debug */ /* User can add his own implementation to report the HAL error return state */ while(1) { } /* USER CODE END Error_Handler_Debug */ } #ifdef USE_FULL_ASSERT /** * @brief Reports the name of the source file and the source line number * where the assert_param error has occurred. * @param file: pointer to the source file name * @param line: assert_param error line source number * @retval None */ void assert_failed(uint8_t *file, uint32_t line) { /* USER CODE BEGIN 6 */ /* User can add his own implementation to report the file name and line number, ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */ /* Infinite loop */ while (1) { } /* USER CODE END 6 */ } #endif /* USE_FULL_ASSERT */