/**
@page Sigfox_PushButton Readme file
@verbatim
******************** (C) COPYRIGHT 2020 STMicroelectronics *******************
* @file Applications/Sigfox/Sigfox_PushButton/readme.txt
* @author MCD Application Team
* @brief This application is a simple demo of a Sigfox Modem sending temperature
* and Battery Level to a Sigfox Network.
******************************************************************************
* @attention
*
* © Copyright (c) 2020 STMicroelectronics.
* All rights reserved.
*
* This software component is licensed by ST under Ultimate Liberty license
* SLA0044, the "License"; You may not use this file except in compliance with
* the License. You may obtain a copy of the License at:
* www.st.com/SLA0044
*
******************************************************************************
@endverbatim
@par Description
This directory contains a set of source files that implements an example of a
Sigfox object sending temperature and Battery Level to a Sigfox Network.
This application is targeting the NUCLEO-WL55JC1 (HIGH-BAND) embedding the STM32WLxx.
******************************************************************************
@par Keywords
Applications, SubGHz_Phy, Sigfox, PushButton, SingleCore
@par Directory contents
- Sigfox_PushButton/Core/Inc/adc.h This file contains all the function prototypes for
the adc.c file
- Sigfox_PushButton/Core/Inc/adc_if.h Header for ADC interface configuration
- Sigfox_PushButton/Core/Inc/dma.h This file contains all the function prototypes for
the dma.c file
- Sigfox_PushButton/Core/Inc/flash_if.h This file contains definitions for FLASH Interface functionalities.
- Sigfox_PushButton/Core/Inc/lptim.h This file contains all the function prototypes for
the lptim.c file
- Sigfox_PushButton/Core/Inc/main.h : Header for main.c file.
This file contains the common defines of the application.
- Sigfox_PushButton/Core/Inc/mn_lptim_if.h Header for between Sigfox monarch and lptim
- Sigfox_PushButton/Core/Inc/platform.h Header for General HW instances configuration
- Sigfox_PushButton/Core/Inc/rtc.h This file contains all the function prototypes for
the rtc.c file
- Sigfox_PushButton/Core/Inc/stm32wlxx_hal_conf.h HAL configuration file.
- Sigfox_PushButton/Core/Inc/stm32wlxx_it.h This file contains the headers of the interrupt handlers.
- Sigfox_PushButton/Core/Inc/stm32wlxx_nucleo_conf.h STM32WLxx_Nucleo board configuration file.
- Sigfox_PushButton/Core/Inc/stm32_lpm_if.h Header for Low Power Manager interface configuration
- Sigfox_PushButton/Core/Inc/subghz.h This file contains all the function prototypes for
the subghz.c file
- Sigfox_PushButton/Core/Inc/sys_app.h Function prototypes for sys_app.c file
- Sigfox_PushButton/Core/Inc/sys_conf.h Applicative configuration, e.g. : debug, trace, low power, sensors
- Sigfox_PushButton/Core/Inc/sys_debug.h Configuration of the debug.c instances
- Sigfox_PushButton/Core/Inc/sys_sensors.h Header for sensors application
- Sigfox_PushButton/Core/Inc/timer_if.h configuration of the timer_if.c instances
- Sigfox_PushButton/Core/Inc/usart.h This file contains all the function prototypes for
the usart.c file
- Sigfox_PushButton/Core/Inc/usart_if.h Header for USART interface configuration
- Sigfox_PushButton/Core/Inc/utilities_conf.h Header for configuration file to utilities
- Sigfox_PushButton/Core/Inc/utilities_def.h Definitions for modules requiring utilities
- Sigfox_PushButton/Sigfox/App/app_sigfox.h Header of application of the Sigfox Middleware
- Sigfox_PushButton/Sigfox/App/ee.h Header of the EEPROM emulator
- Sigfox_PushButton/Sigfox/App/sgfx_app.h provides code for the application of the SIGFOX Middleware
- Sigfox_PushButton/Sigfox/App/sgfx_app_version.h Definition the version of the application
- Sigfox_PushButton/Sigfox/App/sgfx_cstimer.h Interface for cstimer.c driver
- Sigfox_PushButton/Sigfox/App/sgfx_eeprom_if.h eeprom interface to the upper module.
- Sigfox_PushButton/Sigfox/App/sigfox_data.h provides encrypted data
- Sigfox_PushButton/Sigfox/Target/mcu_api.h defines the interface to mcu_api.c
- Sigfox_PushButton/Sigfox/Target/mn_api.h monarch library interface
- Sigfox_PushButton/Sigfox/Target/mw_log_conf.h Configure (enable/disable) traces for CM0
- Sigfox_PushButton/Sigfox/Target/radio_board_if.h Header for Radio interface configuration
- Sigfox_PushButton/Sigfox/Target/radio_conf.h Header of Radio configuration
- Sigfox_PushButton/Sigfox/Target/rf_api.h interface to rf_api.c
- Sigfox_PushButton/Sigfox/Target/se_nvm.h header to emulated SE nvm data
- Sigfox_PushButton/Sigfox/Target/sgfx_credentials.h interface to key manager and encryption algorithm
- Sigfox_PushButton/Sigfox/Target/timer.h Wrapper to timer server
- Sigfox_PushButton/Core/Src/adc.c This file provides code for the configuration
of the ADC instances.
- Sigfox_PushButton/Core/Src/adc_if.c Read status related to the chip (battery level, VREF, chip temperature)
- Sigfox_PushButton/Core/Src/dma.c This file provides code for the configuration
of all the requested memory to memory DMA transfers.
- Sigfox_PushButton/Core/Src/flash_if.c This file provides set of firmware functions to manage Flash
Interface functionalities.
- Sigfox_PushButton/Core/Src/lptim.c This file provides code for the configuration
of the LPTIM instances.
- Sigfox_PushButton/Core/Src/main.c : Main program body
- Sigfox_PushButton/Core/Src/mn_lptim_if.c Interface between Sigfox monarch and lptim
- Sigfox_PushButton/Core/Src/rtc.c This file provides code for the configuration
of the RTC instances.
- Sigfox_PushButton/Core/Src/stm32wlxx_hal_msp.c This file provides code for the MSP Initialization
and de-Initialization codes.
- Sigfox_PushButton/Core/Src/stm32wlxx_it.c Interrupt Service Routines.
- Sigfox_PushButton/Core/Src/stm32_lpm_if.c Low layer function to enter/exit low power modes (stop, sleep)
- Sigfox_PushButton/Core/Src/subghz.c This file provides code for the configuration
of the SUBGHZ instances.
- Sigfox_PushButton/Core/Src/system_stm32wlxx.c CMSIS Cortex Device Peripheral Access Layer System Source File
- Sigfox_PushButton/Core/Src/sys_app.c Initializes HW and SW system entities (not related to the radio)
- Sigfox_PushButton/Core/Src/sys_debug.c Enables 4 debug pins for internal signals RealTime debugging
- Sigfox_PushButton/Core/Src/sys_sensors.c Manages the sensors on the application
- Sigfox_PushButton/Core/Src/timer_if.c Configure RTC Alarm, Tick and Calendar manager
- Sigfox_PushButton/Core/Src/usart.c This file provides code for the configuration
of the USART instances.
- Sigfox_PushButton/Core/Src/usart_if.c Configuration of UART driver interface for hyperterminal communication
- Sigfox_PushButton/Sigfox/App/app_sigfox.c Application of the Sigfox Middleware
- Sigfox_PushButton/Sigfox/App/ee.c Implementation of the EEPROM emulator
- Sigfox_PushButton/Sigfox/App/sgfx_app.c provides code for the application of the sigfox Middleware
- Sigfox_PushButton/Sigfox/App/sgfx_cstimer.c manages carrier sense timer.
- Sigfox_PushButton/Sigfox/App/sgfx_eeprom_if.c eeprom interface to the sigfox component
- Sigfox_PushButton/Sigfox/Target/mcu_api.c mcu library interface
- Sigfox_PushButton/Sigfox/Target/mn_api.c monarch library interface implementation
- Sigfox_PushButton/Sigfox/Target/radio_board_if.c This file provides an interface layer between MW and Radio Board
- Sigfox_PushButton/Sigfox/Target/rf_api.c rf library interface
- Sigfox_PushButton/Sigfox/Target/se_nvm.c manages SE nvm data
- Sigfox_PushButton/Sigfox/Target/sgfx_credentials.c manages keys and encryption algorithm
- Sigfox_PushButton/STM32CubeIDE/Application/User/Core/syscalls.c STM32CubeIDE Minimal System calls file
- Sigfox_PushButton/STM32CubeIDE/Application/User/Core/sysmem.c STM32CubeIDE System Memory calls file
@par Hardware and Software environment
- This example runs on the STM32WLxx Nucleo board.
- STM32WLxx Nucleo board Set-up
- Connect the Nucleo board to your PC with a USB cable type A to micro-B
to ST-LINK connector.
- Please ensure that the ST-LINK connector jumpers are fitted.
- Configure the software via the configuration files:
- sys_conf.h, radio_conf.h, mw_log_conf.h, main.h, etc
-Set Up:
-------------------------- V V --------------------------
| Sigfox Object | | | | Sigfox Network |
| | | | | |
Button-->| |--| |--| |-->Web Server
| | | |
-------------------------- --------------------------
@par How to use it ?
In order to make the program work, you must do the following :
- Open your preferred toolchain
- Rebuild all files and load your image into target memory
- Run the example
- Open a Terminal, connected the Sigfox Object
- UART Config = 9600, 8b, 1 stopbit, no parity, no flow control
- Terminal Config: Select 'CR+LF' for Transmit New-Line and switch 'Local echo' on
- Push Button 1 (it will send a sigfox message, Blue LED blinking)
@par How to debug ?
- make sure the flag DEBUGGER_ENABLED to 1 in sys_conf.h
- simpler to define the flag LOW_POWER_DISABLE to 1 as well
- compile, download and attach
* © COPYRIGHT STMicroelectronics
*/