/**
@page LocalNetwork_Sensor Readme file
@verbatim
******************** (C) COPYRIGHT 2020 STMicroelectronics *******************
* @file Demonstrations/LocalNetwork/LocalNetwork_Sensor/readme.txt
* @author MCD Application Team
* @brief This application is a demo software of a Sensor sending
* Sensor data to the demo concentrator modem
* external host
******************************************************************************
* @attention
*
* <h2><center>© Copyright (c) 2020 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under Ultimate Liberty license
* SLA0044, the "License"; You may not use this file except in compliance with
* the License. You may obtain a copy of the License at:
* www.st.com/SLA0044
*
******************************************************************************
@endverbatim
@par Description
This directory contains a set of source files that implements Sensor sending Sensor
data to the demo concentrator
This application is targeting the STM32WLxx Nucleo board embedding the STM32WLxx.
******************************************************************************
@par Keywords
Demonstrations, SubGHz_Phy, LocalNetwork, Sensor
@par Directory contents
- LocalNetwork_Sensor/Core/Inc/adc.h This file contains all the function prototypes for
the adc.c file
- LocalNetwork_Sensor/Core/Inc/adc_if.h Header for ADC interface configuration
- LocalNetwork_Sensor/Core/Inc/dma.h This file contains all the function prototypes for
the dma.c file
- LocalNetwork_Sensor/Core/Inc/main.h : Header for main.c file.
This file contains the common defines of the application.
- LocalNetwork_Sensor/Core/Inc/platform.h Header for General HW instances configuration
- LocalNetwork_Sensor/Core/Inc/rtc.h This file contains all the function prototypes for
the rtc.c file
- LocalNetwork_Sensor/Core/Inc/stm32wlxx_hal_conf.h HAL configuration file.
- LocalNetwork_Sensor/Core/Inc/stm32wlxx_it.h This file contains the headers of the interrupt handlers.
- LocalNetwork_Sensor/Core/Inc/stm32wlxx_nucleo_conf.h STM32WLxx_Nucleo board configuration file.
- LocalNetwork_Sensor/Core/Inc/stm32_lpm_if.h Header for Low Power Manager interface configuration
- LocalNetwork_Sensor/Core/Inc/subghz.h This file contains all the function prototypes for
the subghz.c file
- LocalNetwork_Sensor/Core/Inc/sys_app.h Function prototypes for sys_app.c file
- LocalNetwork_Sensor/Core/Inc/sys_conf.h Applicative configuration, e.g. : debug, trace, low power, sensors
- LocalNetwork_Sensor/Core/Inc/sys_debug.h Configuration of the debug.c instances
- LocalNetwork_Sensor/Core/Inc/timer_if.h configuration of the timer_if.c instances
- LocalNetwork_Sensor/Core/Inc/usart.h This file contains all the function prototypes for
the usart.c file
- LocalNetwork_Sensor/Core/Inc/usart_if.h Header for USART interface configuration
- LocalNetwork_Sensor/Core/Inc/utilities_conf.h Header for configuration file to utilities
- LocalNetwork_Sensor/Core/Inc/utilities_def.h Definitions for modules requiring utilities
- LocalNetwork_Sensor/SubGHz_Phy/App/demo_sensor.h Header for concentrator behavior module for STM32WL Concentrator Demo.
- LocalNetwork_Sensor/SubGHz_Phy/App/meters_conf.h Configuration for metering module.
- LocalNetwork_Sensor/SubGHz_Phy/Target/mw_log_conf.h Configure (enable/disable) traces for CM0
- LocalNetwork_Sensor/SubGHz_Phy/Target/radio_board_if.h Header for Radio interface configuration
- LocalNetwork_Sensor/SubGHz_Phy/Target/radio_conf.h Header of Radio configuration
- LocalNetwork_Sensor/SubGHz_Phy/Target/timer.h Wrapper to timer server
- LocalNetwork_Sensor/Core/Src/adc.c This file provides code for the configuration
of the ADC instances.
- LocalNetwork_Sensor/Core/Src/adc_if.c Read status related to the chip (battery level, VREF, chip temperature)
- LocalNetwork_Sensor/Core/Src/dma.c This file provides code for the configuration
of all the requested memory to memory DMA transfers.
- LocalNetwork_Sensor/Core/Src/main.c : Main program body
- LocalNetwork_Sensor/Core/Src/rtc.c This file provides code for the configuration
of the RTC instances.
- LocalNetwork_Sensor/Core/Src/stm32wlxx_hal_msp.c This file provides code for the MSP Initialization
and de-Initialization codes.
- LocalNetwork_Sensor/Core/Src/stm32wlxx_it.c Interrupt Service Routines.
- LocalNetwork_Sensor/Core/Src/stm32_lpm_if.c Low layer function to enter/exit low power modes (stop, sleep)
- LocalNetwork_Sensor/Core/Src/subghz.c This file provides code for the configuration
of the SUBGHZ instances.
- LocalNetwork_Sensor/Core/Src/system_stm32wlxx.c CMSIS Cortex Device Peripheral Access Layer System Source File
- LocalNetwork_Sensor/Core/Src/sys_app.c Initializes HW and SW system entities (not related to the radio)
- LocalNetwork_Sensor/Core/Src/sys_debug.c Enables 4 debug pins for internal signals RealTime debugging
- LocalNetwork_Sensor/Core/Src/timer_if.c Configure RTC Alarm, Tick and Calendar manager
- LocalNetwork_Sensor/Core/Src/usart.c This file provides code for the configuration
of the USART instances.
- LocalNetwork_Sensor/Core/Src/usart_if.c Configuration of UART MX driver interface for hyperterminal communication
- LocalNetwork_Sensor/STM32CubeIDE/Application/Core/syscalls.c STM32CubeIDE Minimal System calls file
- LocalNetwork_Sensor/STM32CubeIDE/Application/Core/sysmem.c STM32CubeIDE System Memory calls file
- LocalNetwork_Sensor/SubGHz_Phy/App/demo_sensor.c Concentrator behavior module for STM32WL Concentrator Demo.
- LocalNetwork_Sensor/SubGHz_Phy/Target/radio_board_if.c This file provides an interface layer between MW and Radio Board
@par Hardware and Software environment
- This example runs on the STM32WLxx Nucleo board.
- STM32WLxx Nucleo board Set-up
- Connect the Nucleo board to your PC with a USB cable type A to micro-B
to ST-LINK connector.
- Please ensure that the ST-LINK connector jumpers are fitted.
- STM32WLxx Nucleo requires IS_TCXO_SUPPORTED=1
-Set Up:
-------------------------- V V --------------------------
| Demo/Sensor | | | | Demo/Concentrator |
| | | | | |
ComPort<--| |--| |--| |-->ComPort
| | | |
-------------------------- --------------------------
@par How to use it ?
In order to make the program work, you must do the following :
- Open your preferred toolchain
- Rebuild all files and load your image into target memory
- Run the example
- Open a Terminal, connected the Demo/Sensor
- UART Config = 9600, 8b, 1 stopbit, no parity, no flow control
- Terminal Config: Select 'CR+LF' for Transmit New-Line and switch 'Local echo' on
- Use another Nucleo with Demo/Concentrator binary (please see Demo/Concentrator project) and start it with AT+BEACON_ON (default beacon frequency is EU)
- the Demo/Sensor will automatically acquire the beacon and a time slot will be reserved.
- the Demo/Sensor will send sensor data at reserved time slot.
* <h3><center>© COPYRIGHT STMicroelectronics</center></h3>
*/
747d4e27df