584 lines
27 KiB
C
584 lines
27 KiB
C
/**
|
|
******************************************************************************
|
|
* @file stm32wlxx_hal_pwr.h
|
|
* @author MCD Application Team
|
|
* @brief Header file of PWR HAL module.
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* Copyright (c) 2020 STMicroelectronics.
|
|
* All rights reserved.
|
|
*
|
|
* This software is licensed under terms that can be found in the LICENSE file
|
|
* in the root directory of this software component.
|
|
* If no LICENSE file comes with this software, it is provided AS-IS.
|
|
*
|
|
******************************************************************************
|
|
*/
|
|
|
|
/* Define to prevent recursive inclusion -------------------------------------*/
|
|
#ifndef STM32WLxx_HAL_PWR_H
|
|
#define STM32WLxx_HAL_PWR_H
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
/* Includes ------------------------------------------------------------------*/
|
|
#include "stm32wlxx_hal_def.h"
|
|
|
|
/* Include low level driver */
|
|
#include "stm32wlxx_ll_pwr.h"
|
|
|
|
/** @addtogroup STM32WLxx_HAL_Driver
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup PWR PWR
|
|
* @brief PWR HAL module driver
|
|
* @{
|
|
*/
|
|
|
|
/* Exported types ------------------------------------------------------------*/
|
|
/** @defgroup PWR_Exported_Types PWR Exported Types
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief PWR PVD configuration structure definition
|
|
*/
|
|
typedef struct
|
|
{
|
|
uint32_t PVDLevel; /*!< PVDLevel: Specifies the PVD detection level.
|
|
This parameter can be a value of @ref PWR_PVD_detection_level. */
|
|
|
|
uint32_t Mode; /*!< Mode: Specifies the operating mode for the selected pins.
|
|
This parameter can be a value of @ref PWR_PVD_Mode. */
|
|
} PWR_PVDTypeDef;
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Exported constants --------------------------------------------------------*/
|
|
/** @defgroup PWR_Exported_Constants PWR Exported Constants
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup PWR_PVD_detection_level Power Voltage Detector Level selection
|
|
* @note Refer datasheet for selection voltage value
|
|
* @{
|
|
*/
|
|
#define PWR_PVDLEVEL_0 (0x00000000UL) /*!< PVD threshold around 2.0 V */
|
|
#define PWR_PVDLEVEL_1 ( PWR_CR2_PLS_0) /*!< PVD threshold around 2.2 V */
|
|
#define PWR_PVDLEVEL_2 ( PWR_CR2_PLS_1 ) /*!< PVD threshold around 2.4 V */
|
|
#define PWR_PVDLEVEL_3 ( PWR_CR2_PLS_1 | PWR_CR2_PLS_0) /*!< PVD threshold around 2.5 V */
|
|
#define PWR_PVDLEVEL_4 (PWR_CR2_PLS_2 ) /*!< PVD threshold around 2.6 V */
|
|
#define PWR_PVDLEVEL_5 (PWR_CR2_PLS_2 | PWR_CR2_PLS_0) /*!< PVD threshold around 2.8 V */
|
|
#define PWR_PVDLEVEL_6 (PWR_CR2_PLS_2 | PWR_CR2_PLS_1 ) /*!< PVD threshold around 2.9 V */
|
|
#define PWR_PVDLEVEL_7 (PWR_CR2_PLS_2 | PWR_CR2_PLS_1 | PWR_CR2_PLS_0) /*!< External input analog voltage (compared internally to VREFINT) */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup PWR_PVD_Mode PWR PVD interrupt and event mode
|
|
* @{
|
|
*/
|
|
/* Note: On STM32WL series, power PVD event is not available on EXTI lines */
|
|
/* (only interruption is available through EXTI line 16). */
|
|
#define PWR_PVD_MODE_NORMAL (0x00000000UL) /*!< PVD in polling mode (PVD flag update without interruption) */
|
|
|
|
#define PWR_PVD_MODE_IT_RISING (PVD_MODE_IT | PVD_RISING_EDGE) /*!< PVD in interrupt mode with rising edge trigger detection */
|
|
#define PWR_PVD_MODE_IT_FALLING (PVD_MODE_IT | PVD_FALLING_EDGE) /*!< PVD in interrupt mode with falling edge trigger detection */
|
|
#define PWR_PVD_MODE_IT_RISING_FALLING (PVD_MODE_IT | PVD_RISING_FALLING_EDGE) /*!< PVD in interrupt mode with rising/falling edge trigger detection */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup PWR_Low_Power_Mode_Selection PWR Low Power Mode Selection
|
|
* @{
|
|
*/
|
|
#ifdef CORE_CM0PLUS
|
|
#define PWR_LOWPOWERMODE_STOP0 (0x00000000UL) /*!< Stop 0: Stop mode with main regulator */
|
|
#define PWR_LOWPOWERMODE_STOP1 (PWR_C2CR1_LPMS_0) /*!< Stop 1: Stop mode with low power regulator */
|
|
#define PWR_LOWPOWERMODE_STOP2 (PWR_C2CR1_LPMS_1) /*!< Stop 2: Stop mode with low power regulator and VDD12I interruptible digital core domain supply OFF (less peripherals activated than low power mode stop 1 to reduce power consumption)*/
|
|
#define PWR_LOWPOWERMODE_STANDBY (PWR_C2CR1_LPMS_0 | PWR_C2CR1_LPMS_1) /*!< Standby mode */
|
|
#define PWR_LOWPOWERMODE_SHUTDOWN (PWR_C2CR1_LPMS_2 | PWR_C2CR1_LPMS_1 | PWR_C2CR1_LPMS_0) /*!< Shutdown mode */
|
|
#else
|
|
#define PWR_LOWPOWERMODE_STOP0 (0x00000000UL) /*!< Stop 0: Stop mode with main regulator */
|
|
#define PWR_LOWPOWERMODE_STOP1 (PWR_CR1_LPMS_0) /*!< Stop 1: Stop mode with low power regulator */
|
|
#define PWR_LOWPOWERMODE_STOP2 (PWR_CR1_LPMS_1) /*!< Stop 2: Stop mode with low power regulator and VDD12I interruptible digital core domain supply OFF (less peripherals activated than low power mode stop 1 to reduce power consumption)*/
|
|
#define PWR_LOWPOWERMODE_STANDBY (PWR_CR1_LPMS_0 | PWR_CR1_LPMS_1) /*!< Standby mode */
|
|
#define PWR_LOWPOWERMODE_SHUTDOWN (PWR_CR1_LPMS_2 | PWR_CR1_LPMS_1 | PWR_CR1_LPMS_0) /*!< Shutdown mode */
|
|
#endif
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup PWR_Regulator_state_in_SLEEP_STOP_mode PWR regulator mode
|
|
* @{
|
|
*/
|
|
#define PWR_MAINREGULATOR_ON (0x00000000UL) /*!< Regulator in main mode */
|
|
#define PWR_LOWPOWERREGULATOR_ON (PWR_CR1_LPR) /*!< Regulator in low-power mode */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup PWR_SLEEP_mode_entry PWR SLEEP mode entry
|
|
* @{
|
|
*/
|
|
#define PWR_SLEEPENTRY_WFI ((uint8_t)0x01) /*!< Wait For Interruption instruction to enter Sleep mode */
|
|
#define PWR_SLEEPENTRY_WFE ((uint8_t)0x02) /*!< Wait For Event instruction to enter Sleep mode */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup PWR_STOP_mode_entry PWR STOP mode entry
|
|
* @{
|
|
*/
|
|
#define PWR_STOPENTRY_WFI ((uint8_t)0x01) /*!< Wait For Interruption instruction to enter Stop mode */
|
|
#define PWR_STOPENTRY_WFE ((uint8_t)0x02) /*!< Wait For Event instruction to enter Stop mode */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Private constants ---------------------------------------------------------*/
|
|
/** @defgroup PWR_Private_Constants PWR Private Constants
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup PWR_PVD_EXTI_LINE PWR PVD external interrupt line
|
|
* @{
|
|
*/
|
|
#define PWR_EXTI_LINE_PVD (LL_EXTI_LINE_16) /*!< External interrupt line 16 Connected to the PWR PVD */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup PWR_PVD_Mode_Mask PWR PVD Mode Mask
|
|
* @{
|
|
*/
|
|
/* Note: On STM32WL series, power PVD event is not available on EXTI lines */
|
|
/* (only interruption is available through EXTI line 16). */
|
|
#define PVD_MODE_IT (0x00010000UL) /*!< Mask for interruption yielded by PVD threshold crossing */
|
|
#define PVD_RISING_EDGE (0x00000001UL) /*!< Mask for rising edge set as PVD trigger */
|
|
#define PVD_FALLING_EDGE (0x00000002UL) /*!< Mask for falling edge set as PVD trigger */
|
|
#define PVD_RISING_FALLING_EDGE (0x00000003UL) /*!< Mask for rising and falling edges set as PVD trigger */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Exported macros -----------------------------------------------------------*/
|
|
/** @defgroup PWR_Exported_Macros PWR Exported Macros
|
|
* @{
|
|
*/
|
|
#if defined(DUAL_CORE)
|
|
/** @brief Check whether or not a specific PWR flag is set.
|
|
* @param __FLAG__ specifies the flag to check.
|
|
* This parameter can be one of the following values:
|
|
*
|
|
* /--------------------------------SR1-------------------------------/
|
|
* @arg @ref PWR_FLAG_WUF1 Wake Up Flag 1. Indicates that a wakeup event
|
|
* was received from the WKUP pin 1.
|
|
* @arg @ref PWR_FLAG_WUF2 Wake Up Flag 2. Indicates that a wakeup event
|
|
* was received from the WKUP pin 2.
|
|
* @arg @ref PWR_FLAG_WUF3 Wake Up Flag 3. Indicates that a wakeup event
|
|
* was received from the WKUP pin 3.
|
|
*
|
|
* @arg @ref PWR_FLAG_WPVD Wakeup PVD flag
|
|
*
|
|
* @arg @ref PWR_FLAG_HOLDC2I CPU2 on-Hold Interrupt Flag
|
|
* @arg @ref PWR_FLAG_WUFI Wake-Up Flag Internal. Set when a wakeup is detected on
|
|
* the internal wakeup line.
|
|
*
|
|
* @arg @ref PWR_FLAG_WRFBUSY Wake-up radio busy flag (triggered status: wake-up event or interruption occurred at least once. Can be cleared by software)
|
|
*
|
|
* /--------------------------------SR2-------------------------------/
|
|
* @arg @ref PWR_FLAG_LDORDY Main LDO ready flag
|
|
* @arg @ref PWR_FLAG_SMPSRDY SMPS ready Flag
|
|
*
|
|
* @arg @ref PWR_FLAG_REGLPS Low-power Regulator 1 started: Indicates whether the regulator
|
|
* is ready after a power-on reset or a Standby/Shutdown.
|
|
* @arg @ref PWR_FLAG_REGLPF Low-power Regulator 1 flag: Indicates whether the
|
|
* regulator 1 is in main mode or is in low-power mode.
|
|
*
|
|
* @arg @ref PWR_FLAG_REGMRS Low-power regulator (main regulator or low-power regulator used) flag.
|
|
*
|
|
* @arg @ref PWR_FLAG_FLASHRDY Flash ready flag
|
|
*
|
|
* @arg @ref PWR_FLAG_VOSF Voltage Scaling Flag. Indicates whether the regulator is ready
|
|
* in the selected voltage range or is still changing to the required voltage level.
|
|
* @arg @ref PWR_FLAG_PVDO Power Voltage Detector Output. Indicates whether VDD voltage is below
|
|
* or above the selected PVD threshold.
|
|
*
|
|
* @arg @ref PWR_FLAG_PVMO3 Peripheral Voltage Monitoring Output 3. Indicates whether VDDA voltage is
|
|
* is below or above PVM3 threshold.
|
|
*
|
|
* @arg @ref PWR_FLAG_RFEOL Indicate whether supply voltage is below radio operating level (radio "end of life").
|
|
*
|
|
* @arg @ref PWR_FLAG_RFBUSYS Radio busy signal flag (current status).
|
|
* @arg @ref PWR_FLAG_RFBUSYMS Radio busy masked signal flag (current status).
|
|
*
|
|
* @arg @ref PWR_FLAG_C2BOOTS CPU2 boot request source information flag.
|
|
*
|
|
* /----------------------------EXTSCR--------------------------/
|
|
* @arg @ref PWR_FLAG_STOP System Stop 0 or Stop1 Flag for CPU1.
|
|
* @arg @ref PWR_FLAG_STOP2 System Stop 2 Flag for CPU1.
|
|
* @arg @ref PWR_FLAG_SB System Standby Flag for CPU1.
|
|
*
|
|
* @arg @ref PWR_FLAG_C2STOP System Stop 0 or Stop1 Flag for CPU2.
|
|
* @arg @ref PWR_FLAG_C2STOP2 System Stop 2 Flag for CPU2.
|
|
* @arg @ref PWR_FLAG_C2SB System Standby Flag for CPU2.
|
|
*
|
|
* @arg @ref PWR_FLAG_C1DEEPSLEEP CPU1 DeepSleep Flag.
|
|
* @arg @ref PWR_FLAG_C2DEEPSLEEP CPU2 DeepSleep Flag.
|
|
*
|
|
* @retval The new state of __FLAG__ (TRUE or FALSE).
|
|
*/
|
|
#else
|
|
/** @brief Check whether or not a specific PWR flag is set.
|
|
* @param __FLAG__ specifies the flag to check.
|
|
* This parameter can be one of the following values:
|
|
*
|
|
* /--------------------------------SR1-------------------------------/
|
|
* @arg @ref PWR_FLAG_WUF1 Wake Up Flag 1. Indicates that a wakeup event
|
|
* was received from the WKUP pin 1.
|
|
* @arg @ref PWR_FLAG_WUF2 Wake Up Flag 2. Indicates that a wakeup event
|
|
* was received from the WKUP pin 2.
|
|
* @arg @ref PWR_FLAG_WUF3 Wake Up Flag 3. Indicates that a wakeup event
|
|
* was received from the WKUP pin 3.
|
|
*
|
|
* @arg @ref PWR_FLAG_WPVD Wakeup PVD flag
|
|
*
|
|
* @arg @ref PWR_FLAG_WUFI Wake-Up Flag Internal. Set when a wakeup is detected on
|
|
* the internal wakeup line.
|
|
*
|
|
* @arg @ref PWR_FLAG_WRFBUSY Wake-up radio busy flag (triggered status: wake-up event or interruption occurred at least once. Can be cleared by software)
|
|
*
|
|
* /--------------------------------SR2-------------------------------/
|
|
* @arg @ref PWR_FLAG_LDORDY Main LDO ready flag
|
|
* @arg @ref PWR_FLAG_SMPSRDY SMPS ready Flag
|
|
*
|
|
* @arg @ref PWR_FLAG_REGLPS Low-power Regulator 1 started: Indicates whether the regulator
|
|
* is ready after a power-on reset or a Standby/Shutdown.
|
|
* @arg @ref PWR_FLAG_REGLPF Low-power Regulator 1 flag: Indicates whether the
|
|
* regulator 1 is in main mode or is in low-power mode.
|
|
*
|
|
* @arg @ref PWR_FLAG_REGMRS Low-power regulator (main regulator or low-power regulator used) flag.
|
|
*
|
|
* @arg @ref PWR_FLAG_FLASHRDY Flash ready flag
|
|
*
|
|
* @arg @ref PWR_FLAG_VOSF Voltage Scaling Flag. Indicates whether the regulator is ready
|
|
* in the selected voltage range or is still changing to the required voltage level.
|
|
* @arg @ref PWR_FLAG_PVDO Power Voltage Detector Output. Indicates whether VDD voltage is below
|
|
* or above the selected PVD threshold.
|
|
*
|
|
* @arg @ref PWR_FLAG_PVMO3 Peripheral Voltage Monitoring Output 3. Indicates whether VDDA voltage is
|
|
* is below or above PVM3 threshold.
|
|
*
|
|
* @arg @ref PWR_FLAG_RFEOL Indicate whether supply voltage is below radio operating level (radio "end of life").
|
|
*
|
|
* @arg @ref PWR_FLAG_RFBUSYS Radio busy signal flag (current status).
|
|
* @arg @ref PWR_FLAG_RFBUSYMS Radio busy masked signal flag (current status).
|
|
*
|
|
* /----------------------------EXTSCR--------------------------/
|
|
* @arg @ref PWR_FLAG_STOP System Stop 0 or Stop1 Flag for CPU1.
|
|
* @arg @ref PWR_FLAG_STOP2 System Stop 2 Flag for CPU1.
|
|
* @arg @ref PWR_FLAG_SB System Standby Flag for CPU1.
|
|
*
|
|
* @arg @ref PWR_FLAG_C1DEEPSLEEP CPU1 DeepSleep Flag.
|
|
*
|
|
* @retval The new state of __FLAG__ (TRUE or FALSE).
|
|
*/
|
|
#endif
|
|
#define __HAL_PWR_GET_FLAG(__FLAG__) ((((__FLAG__) & PWR_FLAG_REG_MASK) == PWR_FLAG_REG_SR1) ? \
|
|
( \
|
|
PWR->SR1 & (1UL << ((__FLAG__) & 31UL)) \
|
|
) \
|
|
: \
|
|
( \
|
|
(((__FLAG__) & PWR_FLAG_REG_MASK) == PWR_FLAG_REG_SR2) ? \
|
|
( \
|
|
PWR->SR2 & (1UL << ((__FLAG__) & 31UL)) \
|
|
) \
|
|
: \
|
|
( \
|
|
PWR->EXTSCR & (1UL << ((__FLAG__) & 31UL)) \
|
|
) \
|
|
) \
|
|
)
|
|
|
|
#if defined(DUAL_CORE)
|
|
/** @brief Clear a specific PWR flag.
|
|
* @note Clearing of flags {PWR_FLAG_STOP, PWR_FLAG_STOP2, PWR_FLAG_SB}
|
|
* and flags {PWR_FLAG_C2STOP, PWR_FLAG_C2SB} are grouped:
|
|
* clearing of one flag also clears the other ones.
|
|
* @param __FLAG__ specifies the flag to clear.
|
|
* This parameter can be one of the following values:
|
|
*
|
|
* /--------------------------------SCR (SRR)------------------------------/
|
|
* @arg @ref PWR_FLAG_WU Wake Up Flag of all pins.
|
|
* @arg @ref PWR_FLAG_WUF1 Wake Up Flag 1. Indicates that a wakeup event
|
|
* was received from the WKUP pin 1.
|
|
* @arg @ref PWR_FLAG_WUF2 Wake Up Flag 2. Indicates that a wakeup event
|
|
* was received from the WKUP pin 2.
|
|
* @arg @ref PWR_FLAG_WUF3 Wake Up Flag 3. Indicates that a wakeup event
|
|
* was received from the WKUP pin 3.
|
|
*
|
|
* @arg @ref PWR_FLAG_WPVD Wakeup PVD flag
|
|
*
|
|
* @arg @ref PWR_FLAG_HOLDC2I CPU2 on-Hold Interrupt Flag
|
|
*
|
|
* @arg @ref PWR_FLAG_WRFBUSY Wake-up radio busy flag (triggered status: wake-up event or interruption occurred at least once. Can be cleared by software)
|
|
*
|
|
* /----------------------------EXTSCR--------------------------/
|
|
* @arg @ref PWR_FLAG_LPMODES System Standby Flag for CPU1.
|
|
* @arg @ref PWR_FLAG_C2LPMODES System Standby Flag for CPU2.
|
|
*
|
|
* @retval None
|
|
*/
|
|
#else
|
|
/** @brief Clear a specific PWR flag.
|
|
* @note Clearing of flags {PWR_FLAG_STOP, PWR_FLAG_STOP2, PWR_FLAG_SB}
|
|
* are grouped:
|
|
* clearing of one flag also clears the other ones.
|
|
* @param __FLAG__ specifies the flag to clear.
|
|
* This parameter can be one of the following values:
|
|
*
|
|
* /--------------------------------SCR (SRR)------------------------------/
|
|
* @arg @ref PWR_FLAG_WU Wake Up Flag of all pins.
|
|
* @arg @ref PWR_FLAG_WUF1 Wake Up Flag 1. Indicates that a wakeup event
|
|
* was received from the WKUP pin 1.
|
|
* @arg @ref PWR_FLAG_WUF2 Wake Up Flag 2. Indicates that a wakeup event
|
|
* was received from the WKUP pin 2.
|
|
* @arg @ref PWR_FLAG_WUF3 Wake Up Flag 3. Indicates that a wakeup event
|
|
* was received from the WKUP pin 3.
|
|
*
|
|
* @arg @ref PWR_FLAG_WPVD Wakeup PVD flag
|
|
*
|
|
* @arg @ref PWR_FLAG_WRFBUSY Wake-up radio busy flag (triggered status: wake-up event or interruption occurred at least once. Can be cleared by software)
|
|
*
|
|
* /----------------------------EXTSCR--------------------------/
|
|
* @arg @ref PWR_FLAG_LPMODES System Standby Flag for CPU1.
|
|
*
|
|
* @retval None
|
|
*/
|
|
#endif
|
|
#define __HAL_PWR_CLEAR_FLAG(__FLAG__) ((((__FLAG__) & PWR_FLAG_REG_MASK) == PWR_FLAG_REG_EXTSCR) ? \
|
|
( \
|
|
PWR->EXTSCR = (1UL << (((__FLAG__) & PWR_FLAG_EXTSCR_CLR_MASK) >> PWR_FLAG_EXTSCR_CLR_POS)) \
|
|
) \
|
|
: \
|
|
( \
|
|
(((__FLAG__)) == PWR_FLAG_WU) ? \
|
|
(PWR->SCR = PWR_SCR_CWUF) : \
|
|
(PWR->SCR = (1UL << ((__FLAG__) & 31UL))) \
|
|
) \
|
|
)
|
|
|
|
/**
|
|
* @brief Enable the PVD Extended Interrupt line.
|
|
* @retval None
|
|
*/
|
|
#if defined(CORE_CM0PLUS)
|
|
#define __HAL_PWR_PVD_EXTI_ENABLE_IT() LL_C2_EXTI_EnableIT_0_31(PWR_EXTI_LINE_PVD)
|
|
#else
|
|
#define __HAL_PWR_PVD_EXTI_ENABLE_IT() LL_EXTI_EnableIT_0_31(PWR_EXTI_LINE_PVD)
|
|
#endif
|
|
|
|
/**
|
|
* @brief Disable the PVD Extended Interrupt line.
|
|
* @retval None
|
|
*/
|
|
#if defined(CORE_CM0PLUS)
|
|
#define __HAL_PWR_PVD_EXTI_DISABLE_IT() LL_C2_EXTI_DisableIT_0_31(PWR_EXTI_LINE_PVD)
|
|
#else
|
|
#define __HAL_PWR_PVD_EXTI_DISABLE_IT() LL_EXTI_DisableIT_0_31(PWR_EXTI_LINE_PVD)
|
|
#endif
|
|
|
|
/* Note: On STM32WL series, power PVD event is not available on EXTI lines */
|
|
/* (only interruption is available through EXTI line 16). */
|
|
|
|
/**
|
|
* @brief Enable the PVD Extended Interrupt Rising Trigger.
|
|
* @note PVD flag polarity is inverted compared to EXTI line, therefore
|
|
* EXTI rising and falling logic edges are inverted versus PVD voltage edges.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE() LL_EXTI_EnableFallingTrig_0_31(PWR_EXTI_LINE_PVD)
|
|
|
|
/**
|
|
* @brief Disable the PVD Extended Interrupt Rising Trigger.
|
|
* @note PVD flag polarity is inverted compared to EXTI line, therefore
|
|
* EXTI rising and falling logic edges are inverted versus PVD voltage edges.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE() LL_EXTI_DisableFallingTrig_0_31(PWR_EXTI_LINE_PVD)
|
|
|
|
/**
|
|
* @brief Enable the PVD Extended Interrupt Falling Trigger.
|
|
* @note PVD flag polarity is inverted compared to EXTI line, therefore
|
|
* EXTI rising and falling logic edges are inverted versus PVD voltage edges.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE() LL_EXTI_EnableRisingTrig_0_31(PWR_EXTI_LINE_PVD)
|
|
|
|
/**
|
|
* @brief Disable the PVD Extended Interrupt Falling Trigger.
|
|
* @note PVD flag polarity is inverted compared to EXTI line, therefore
|
|
* EXTI rising and falling logic edges are inverted versus PVD voltage edges.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE() LL_EXTI_DisableRisingTrig_0_31(PWR_EXTI_LINE_PVD)
|
|
|
|
/**
|
|
* @brief Enable the PVD Extended Interrupt Rising & Falling Trigger.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_FALLING_EDGE() \
|
|
do { \
|
|
__HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE(); \
|
|
__HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE(); \
|
|
} while(0)
|
|
|
|
/**
|
|
* @brief Disable the PVD Extended Interrupt Rising & Falling Trigger.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_FALLING_EDGE() \
|
|
do { \
|
|
__HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE(); \
|
|
__HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE(); \
|
|
} while(0)
|
|
|
|
/**
|
|
* @brief Generate a Software interrupt on selected EXTI line.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_PWR_PVD_EXTI_GENERATE_SWIT() LL_EXTI_GenerateSWI_0_31(PWR_EXTI_LINE_PVD)
|
|
|
|
/**
|
|
* @brief Check whether or not the PVD EXTI interrupt flag is set.
|
|
* @retval EXTI PVD Line Status.
|
|
*/
|
|
#define __HAL_PWR_PVD_EXTI_GET_FLAG() LL_EXTI_ReadFlag_0_31(PWR_EXTI_LINE_PVD)
|
|
|
|
/**
|
|
* @brief Clear the PVD EXTI interrupt flag.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_PWR_PVD_EXTI_CLEAR_FLAG() LL_EXTI_ClearFlag_0_31(PWR_EXTI_LINE_PVD)
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
|
|
/* Private macros --------------------------------------------------------*/
|
|
/** @defgroup PWR_Private_Macros PWR Private Macros
|
|
* @{
|
|
*/
|
|
#define IS_PWR_PVD_LEVEL(__LEVEL__) (((__LEVEL__) == PWR_PVDLEVEL_0) || ((__LEVEL__) == PWR_PVDLEVEL_1)|| \
|
|
((__LEVEL__) == PWR_PVDLEVEL_2) || ((__LEVEL__) == PWR_PVDLEVEL_3)|| \
|
|
((__LEVEL__) == PWR_PVDLEVEL_4) || ((__LEVEL__) == PWR_PVDLEVEL_5)|| \
|
|
((__LEVEL__) == PWR_PVDLEVEL_6) || ((__LEVEL__) == PWR_PVDLEVEL_7))
|
|
|
|
#define IS_PWR_PVD_MODE(__MODE__) (((__MODE__) == PWR_PVD_MODE_NORMAL) ||\
|
|
((__MODE__) == PWR_PVD_MODE_IT_RISING) ||\
|
|
((__MODE__) == PWR_PVD_MODE_IT_FALLING) ||\
|
|
((__MODE__) == PWR_PVD_MODE_IT_RISING_FALLING))
|
|
|
|
#define IS_PWR_REGULATOR(__REGULATOR__) (((__REGULATOR__) == PWR_MAINREGULATOR_ON) || \
|
|
((__REGULATOR__) == PWR_LOWPOWERREGULATOR_ON))
|
|
|
|
#define IS_PWR_SLEEP_ENTRY(__ENTRY__) (((__ENTRY__) == PWR_SLEEPENTRY_WFI) || \
|
|
((__ENTRY__) == PWR_SLEEPENTRY_WFE))
|
|
|
|
#define IS_PWR_STOP_ENTRY(__ENTRY__) (((__ENTRY__) == PWR_STOPENTRY_WFI) || \
|
|
((__ENTRY__) == PWR_STOPENTRY_WFE))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Include PWR HAL Extended module */
|
|
#include "stm32wlxx_hal_pwr_ex.h"
|
|
|
|
/* Exported functions --------------------------------------------------------*/
|
|
/** @defgroup PWR_Exported_Functions PWR Exported Functions
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup PWR_Exported_Functions_Group1 Initialization and de-initialization functions
|
|
* @{
|
|
*/
|
|
|
|
/* Initialization and de-initialization functions *******************************/
|
|
void HAL_PWR_DeInit(void);
|
|
|
|
void HAL_PWR_EnableBkUpAccess(void);
|
|
void HAL_PWR_DisableBkUpAccess(void);
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup PWR_Exported_Functions_Group2 Peripheral Control functions
|
|
* @{
|
|
*/
|
|
/* Peripheral Control functions ************************************************/
|
|
HAL_StatusTypeDef HAL_PWR_ConfigPVD(PWR_PVDTypeDef *sConfigPVD);
|
|
void HAL_PWR_EnablePVD(void);
|
|
void HAL_PWR_DisablePVD(void);
|
|
|
|
/* WakeUp pins configuration functions ****************************************/
|
|
void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinPolarity);
|
|
void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx);
|
|
|
|
/* Low Power modes configuration functions ************************************/
|
|
void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry);
|
|
void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry);
|
|
void HAL_PWR_EnterSTANDBYMode(void);
|
|
|
|
void HAL_PWR_EnableSleepOnExit(void);
|
|
void HAL_PWR_DisableSleepOnExit(void);
|
|
|
|
void HAL_PWR_EnableSEVOnPend(void);
|
|
void HAL_PWR_DisableSEVOnPend(void);
|
|
|
|
void HAL_PWR_PVDCallback(void);
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
|
|
#endif /* STM32WLxx_HAL_PWR_H */
|
|
|