/**
@page SubGHz_Phy_LrFhss Readme file
@verbatim
******************************************************************************
* @file Applications/SubGHz_Phy/SubGHz_Phy_LrFhss/readme.txt
* @author MCD Application Team
* @brief This application is a simple demo application software between
a LR-FHSS object (STM32WL Nucleo board) and
a customized Gateway solution integrating the LR-FHSS Modulation
******************************************************************************
*
* Copyright (c) 2020-2021 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
@endverbatim
@par Description
This directory contains a set of source files that implements a LR-FHSS tests application (Tx only).
The transmission happens periodically, initially frames have payload of 64 bytes
- user button 1 increments "packet length" by 16 bytes and wraps if max length is reached
- user button 2 increments "packet length" by 1 bytes and wraps if max length is reached
- user button 3 toggles packet "payload mode" from ramp (0x00, 0x01..) to prbs9
LED blue on while radio in Tx
This application is targeting the STM32WLxx Nucleo board embedding the STM32WLxx.
******************************************************************************
@par Keywords
Applications, SubGHz_Phy, LR-FHSS, SingleCore
@par Directory contents
- SubGHz_Phy_LrFhss/Core/Inc/dma.h This file contains all the function prototypes for
the dma.c file
- SubGHz_Phy_LrFhss/Core/Inc/gpio.h This file contains all the function prototypes for
the gpio.c file
- SubGHz_Phy_LrFhss/Core/Inc/main.h : Header for main.c file.
This file contains the common defines of the application.
- SubGHz_Phy_LrFhss/Core/Inc/platform.h Header for General HW instances configuration
- SubGHz_Phy_LrFhss/Core/Inc/rtc.h This file contains all the function prototypes for
the rtc.c file
- SubGHz_Phy_LrFhss/Core/Inc/stm32wlxx_hal_conf.h HAL configuration file.
- SubGHz_Phy_LrFhss/Core/Inc/stm32wlxx_it.h This file contains the headers of the interrupt handlers.
- SubGHz_Phy_LrFhss/Core/Inc/stm32wlxx_nucleo_conf.h STM32WLxx_Nucleo board configuration file.
- SubGHz_Phy_LrFhss/Core/Inc/stm32_lpm_if.h Header for Low Power Manager interface configuration
- SubGHz_Phy_LrFhss/Core/Inc/subghz.h This file contains all the function prototypes for
the subghz.c file
- SubGHz_Phy_LrFhss/Core/Inc/sys_app.h Function prototypes for sys_app.c file
- SubGHz_Phy_LrFhss/Core/Inc/sys_conf.h Applicative configuration, e.g. : debug, trace, low power, sensors
- SubGHz_Phy_LrFhss/Core/Inc/sys_debug.h Configuration of the debug.c instances
- SubGHz_Phy_LrFhss/Core/Inc/timer_if.h configuration of the timer_if.c instances
- SubGHz_Phy_LrFhss/Core/Inc/usart.h This file contains all the function prototypes for
the usart.c file
- SubGHz_Phy_LrFhss/Core/Inc/usart_if.h Header for USART interface configuration
- SubGHz_Phy_LrFhss/Core/Inc/utilities_conf.h Header for configuration file to utilities
- SubGHz_Phy_LrFhss/Core/Inc/utilities_def.h Definitions for modules requiring utilities
- SubGHz_Phy_LrFhss/SubGHz_Phy/App/app_subghz_phy.h Header of application of the SubGHz_Phy Middleware
- SubGHz_Phy_LrFhss/SubGHz_Phy/App/app_version.h Definition the version of the application
- SubGHz_Phy_LrFhss/SubGHz_Phy/App/subghz_phy_app.h Header of application of the SubGHz_Phy Middleware
- SubGHz_Phy_LrFhss/SubGHz_Phy/Target/mw_log_conf.h Configure (enable/disable) traces
- SubGHz_Phy_LrFhss/SubGHz_Phy/Target/radio_board_if.h Header for Radio interface configuration
- SubGHz_Phy_LrFhss/SubGHz_Phy/Target/radio_conf.h Header of Radio configuration
- SubGHz_Phy_LrFhss/SubGHz_Phy/Target/timer.h Wrapper to timer server
- SubGHz_Phy_LrFhss/Core/Src/dma.c This file provides code for the configuration
of all the requested memory to memory DMA transfers.
- SubGHz_Phy_LrFhss/Core/Src/gpio.c This file provides code for the configuration
of all used GPIO pins.
- SubGHz_Phy_LrFhss/Core/Src/main.c : Main program body
- SubGHz_Phy_LrFhss/Core/Src/rtc.c This file provides code for the configuration
of the RTC instances.
- SubGHz_Phy_LrFhss/Core/Src/stm32wlxx_hal_msp.c This file provides code for the MSP Initialization
and de-Initialization codes.
- SubGHz_Phy_LrFhss/Core/Src/stm32wlxx_it.c Interrupt Service Routines.
- SubGHz_Phy_LrFhss/Core/Src/stm32_lpm_if.c Low layer function to enter/exit low power modes (stop, sleep)
- SubGHz_Phy_LrFhss/Core/Src/subghz.c This file provides code for the configuration
of the SUBGHZ instances.
- SubGHz_Phy_LrFhss/Core/Src/system_stm32wlxx.c CMSIS Cortex Device Peripheral Access Layer System Source File
- SubGHz_Phy_LrFhss/Core/Src/sys_app.c Initializes HW and SW system entities (not related to the radio)
- SubGHz_Phy_LrFhss/Core/Src/sys_debug.c Configure probes pins RealTime debugging and JTAG/SerialWires for LowPower
- SubGHz_Phy_LrFhss/Core/Src/timer_if.c Configure RTC Alarm, Tick and Calendar manager
- SubGHz_Phy_LrFhss/Core/Src/usart.c This file provides code for the configuration
of the USART instances.
- SubGHz_Phy_LrFhss/Core/Src/usart_if.c Configuration of UART driver interface for hyperterminal communication
- SubGHz_Phy_LrFhss/STM32CubeIDE/Application/User/Core/syscalls.c STM32CubeIDE Minimal System calls file
- SubGHz_Phy_LrFhss/STM32CubeIDE/Application/User/Core/sysmem.c STM32CubeIDE System Memory calls file
- SubGHz_Phy_LrFhss/SubGHz_Phy/App/app_subghz_phy.c Application of the SubGHz_Phy Middleware
- SubGHz_Phy_LrFhss/SubGHz_Phy/App/subghz_phy_app.c Application of the SubGHz_Phy Middleware
- SubGHz_Phy_LrFhss/SubGHz_Phy/Target/radio_board_if.c This file provides an interface layer between MW and Radio Board
@par Hardware and Software environment
- This example runs on the STM32WLxx Nucleo board.
- STM32WLxx Nucleo board Set-up
- Connect the Nucleo board to your PC with a USB cable type A to micro-B
to ST-LINK connector.
- Please ensure that the ST-LINK connector jumpers are fitted.
- Configure the software via the configuration files:
- sys_conf.h, radio_conf.h, mw_log_conf.h, main.h, etc
-Set Up:
-------------------------- V V --------------------------
| Tx Device | | | | Gateway |
| | | | | supporting |
ComPort<--| |--| |--| LrFhss |-->ComPort
| | | |
-------------------------- --------------------------
@par How to use it ?
In order to make the program work, you must do the following :
- Open your preferred toolchain
- Rebuild all files and load your image into target memory
- Reset the board
- Run the example with the device in the range of a LrFhss gateway
- To visualize device logs, open a Terminals
- UART Config = 115200, 8b, 1 stopbit, no parity, no flow control
@par How to debug ?
- make sure the flag DEBUGGER_ENABLED to 1 in sys_conf.h
- simpler to define the flag LOW_POWER_DISABLE to 1 as well
- compile, download and attach
@par How to use MX to modify some RF middleware and application settings
This example is compatible (with some problems/limitations) with STM32CubeMX
and the RF application and middleware configuration can be modified via GUI. Few warnings and guidelines:
- ioc file is provided in the project directory and can be opened with STM32CubeMX v6.7.0 or higher.
- warning: when regenerating with the provided ioc file,
the IDE projects are regenerated and paths to HAL and MWs files from STM32Cube/Repository location are erroneously added; to avoid that,
user shall uncheck the "Use Default Firmware Location" in the GUI "Project-Manager" panel
and shall replace "Firmware Relative Path" with the root directory of the STM32CubeWL firmware package (e.g. C:\myDir\STM32Cube_FW_WL_V1.3.0\);
problem will be fixed in next STM32CubeMX version.
- .extSettings file allows to add to the generated IDE projects additional files not generated natively by MX (e.g. BSP files).
- when regenerating on existing code and existing linker files:
- STM32CubeMX updates the existing project content and preserves linker files.
- STM32CubeMX does not update the USER CODE sections (lines between /* USER CODE BEGIN Xxx */ and /* USER CODE END Xxx */).
- when regenerating after copying only the ioc file in an empty directory:
- STM32CubeMX generates default project files and default linker files. (Please check original linker file from project directory)
- it is up to the user to to fill the USER CODE sections with his application code.
This SubGHz_Phy project is based on "Advanced template" (MX GUI Application).
USER CODE SECTION are filled to end up with "Switch_Fhss_Fsk_Lora" project.
@par How to use it with Azure ThreadX RTOS?
This example can be combined with Azure ThreadX RTOS via STM32CubeMX. The video tutorial:
"STM32WL - How to port an existing RF application on Azure ThreadX RTOS"
is available on https://www.youtube.com/playlist?list=PLnMKNibPkDnE2eaR-ZGM3ZJXadyQLtTpX
but not sufficient for the complete porting of this example.
After following the video instructions the user shall open "subghz_phy_app.c" and manually:
- delete "stm32_seq.h" inclusion
- delete the line "UTIL_SEQ_RegTask((1 << CFG_SEQ_Task_SubGHz_Phy_App_Process), UTIL_SEQ_RFU, Per_Process);
- call Per_Process(); function within /* USER CODE App_Main_Thread_Entry_Loop */
- replace "UTIL_SEQ_SetTask(..) calls" with tx_thread_resume(&App_MainThread);
* <h3><center>© COPYRIGHT STMicroelectronics</center></h3>
*/
9d77b66f25