75 lines
3.1 KiB
Plaintext
75 lines
3.1 KiB
Plaintext
/**
|
|
@page CRC_UserDefinedPolynomial CRC : 8-bit CRC calculation using user-defined polynomial value
|
|
|
|
@verbatim
|
|
******************************************************************************
|
|
* @file Examples_LL/CRC/CRC_UserDefinedPolynomial/readme.txt
|
|
* @author MCD Application Team
|
|
* @brief Description of the CRC_UserDefinedPolynomial example.
|
|
******************************************************************************
|
|
*
|
|
* Copyright (c) 2020 STMicroelectronics. All rights reserved.
|
|
*
|
|
* This software component is licensed by ST under BSD 3-Clause license,
|
|
* the "License"; You may not use this file except in compliance with the
|
|
* License. You may obtain a copy of the License at:
|
|
* opensource.org/licenses/BSD-3-Clause
|
|
*
|
|
******************************************************************************
|
|
@endverbatim
|
|
|
|
@par Example Description
|
|
|
|
How to configure and use the CRC calculation unit to compute an 8-bit CRC code
|
|
for a given data buffer, based on a user-defined generating polynomial. The
|
|
peripheral initialization is done using LL unitary service functions for
|
|
optimization purposes (performance and size).
|
|
|
|
The CRC peripheral is configured to work with a user defined polynomial value (8-bit long value).
|
|
In this example, the polynomial is set manually to 0x9B that is X^8 + X^7 + X^4 + X^3 + X + 1.
|
|
Generated CRC value is then 8-bit long.
|
|
|
|
Example execution:
|
|
After startup from reset and system configuration, CRC configuration is performed (use of user-defined Polynomial value).
|
|
CRC code of a given data buffer is computed.
|
|
Data buffer length has been chosen as not an exact nb of u32 (32-bit words), in order to illustrate
|
|
use of offered API for feeding the calculator (u32, u16 or u8 inputs).
|
|
The calculated CRC code is stored in ubCRCValue variable.
|
|
Once calculated, CRC value (ubCRCValue) is compared to the CRC expected value (ubExpectedCRCValue),
|
|
and if both are equal, LED2 is turned On.
|
|
In case of errors, LED2 is blinking (1sec period).
|
|
|
|
|
|
@par Keywords
|
|
|
|
Security, CRC, CRC Polynomial, CRC-8-WCDMA, hardware CRC, user-defined generating polynomial
|
|
|
|
|
|
@par Directory contents
|
|
|
|
- CRC/CRC_UserDefinedPolynomial/Inc/stm32wlxx_it.h Interrupt handlers header file
|
|
- CRC/CRC_UserDefinedPolynomial/Inc/main.h Header for main.c module
|
|
- CRC/CRC_UserDefinedPolynomial/Inc/stm32_assert.h Template file to include assert_failed function
|
|
- CRC/CRC_UserDefinedPolynomial/Src/stm32wlxx_it.c Interrupt handlers
|
|
- CRC/CRC_UserDefinedPolynomial/Src/main.c Main program
|
|
- CRC/CRC_UserDefinedPolynomial/Src/system_stm32wlxx.c STM32WLxx system source file
|
|
|
|
|
|
@par Hardware and Software environment
|
|
|
|
- This example runs on STM32WL55JCIx devices.
|
|
|
|
- This example has been tested with NUCLEO-WL55JC RevC board and can be
|
|
easily tailored to any other supported device and development board.
|
|
|
|
@par How to use it ?
|
|
|
|
In order to make the program work, you must do the following :
|
|
- Open your preferred toolchain
|
|
- Rebuild all files and load your image into target memory
|
|
- Run the example
|
|
|
|
* <h3><center>© COPYRIGHT STMicroelectronics</center></h3>
|
|
*/
|
|
|