/**
@page Sensor Readme file
@verbatim
******************************************************************************
* @file Demonstrations/LocalNetwork_Sensor/Sensor/readme.txt
* @author MCD Application Team
* @brief This application is a demo software of a Sensor sending
* Sensor data to the demo concentrator modem
* external host
******************************************************************************
*
* Copyright (c) 2020-2021 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
@endverbatim
@par Description
This directory contains a set of source files that implements Sensor sending Sensor
data (based on all sensors available on the B-WL5M-SUBG1 board) to the demo concentrator.
This application is targeting the B-WL5M-SUBG1 Connectivity Expansion Board embedding the STM32WL5Mxx.
******************************************************************************
@par Keywords
Demonstrations, SubGHz_Phy, LocalNetwork, Sensor
@par Directory contents
- Sensor/Core/Inc/adc.h This file contains all the function prototypes for
the adc.c file
- Sensor/Core/Inc/adc_if.h Header for ADC interface configuration
- Sensor/Core/Inc/b_wl5m_subg_conf.h configuration file.
This file is a copy of template b_wl5m_subg_conf_template.h
- Sensor/Core/Inc/dma.h This file contains all the function prototypes for
the dma.c file
- Sensor/Core/Inc/gpio.h This file contains all the function prototypes for
the gpio.c file
- Sensor/Core/Inc/main.h : Header for main.c file.
This file contains the common defines of the application.
- Sensor/Core/Inc/mx25l4006_conf.h This file contains all the description of the
MX25L4006 CMOS Serial Flash.
- Sensor/Core/Inc/platform.h Header for General HW instances configuration
- Sensor/Core/Inc/rtc.h This file contains all the function prototypes for
the rtc.c file
- Sensor/Core/Inc/stm32wlxx_hal_conf.h HAL configuration file.
- Sensor/Core/Inc/stm32wlxx_it.h This file contains the headers of the interrupt handlers.
- Sensor/Core/Inc/stm32_lpm_if.h Header for Low Power Manager interface configuration
- Sensor/Core/Inc/subghz.h This file contains all the function prototypes for
the subghz.c file
- Sensor/Core/Inc/sys_app.h Function prototypes for sys_app.c file
- Sensor/Core/Inc/sys_conf.h Applicative configuration, e.g. : debug, trace, low power, sensors
- Sensor/Core/Inc/sys_debug.h Configuration of the debug.c instances
- Sensor/Core/Inc/timer_if.h configuration of the timer_if.c instances
- Sensor/Core/Inc/usart.h This file contains all the function prototypes for
the usart.c file
- Sensor/Core/Inc/usart_if.h Header for USART interface configuration
- Sensor/Core/Inc/utilities_conf.h Header for configuration file to utilities
- Sensor/Core/Inc/utilities_def.h Definitions for modules requiring utilities
- Sensor/Middlewares/ST/STM32_MotionAR_Library/Inc/motion_ar.h Header for motion_ar module
- Sensor/Middlewares/ST/STM32_MotionEC_Library/Inc/motion_ec.h Header for motion_ec module
- Sensor/Middlewares/ST/STM32_MotionMC_Library/Inc/motion_mc.h Header for motion_mc module
- Sensor/Middlewares/ST/STM32_MotionMC_Library/Inc/motion_mc_cm0p.h Header for motion_mc_cm0p module
- Sensor/Middlewares/ST/STM32_MotionPM_Library/Inc/motion_pm.h Header for motion_pm module
- Sensor/SubGHz_Phy/App/demo_sensor.h Header for concentrator behavior module for STM32WL Concentrator Demo.
- Sensor/SubGHz_Phy/App/meters.h Header for metering module.
- Sensor/SubGHz_Phy/App/meters_conf.h Configuration for metering module.
- Sensor/SubGHz_Phy/App/stm32wl55c_discovery_conf.h configuration file.
- Sensor/SubGHz_Phy/App/version.h Header with version of STM32WL Sensor Concentrator Demo.
- Sensor/SubGHz_Phy/Target/mw_log_conf.h Configure (enable/disable) traces for CM0
- Sensor/SubGHz_Phy/Target/radio_board_if.h Header for Radio interface configuration
- Sensor/SubGHz_Phy/Target/radio_conf.h Header of Radio configuration
- Sensor/SubGHz_Phy/Target/timer.h Wrapper to timer server
- Sensor/Core/Src/adc.c This file provides code for the configuration
of the ADC instances.
- Sensor/Core/Src/adc_if.c Read status related to the chip (battery level, VREF, chip temperature)
- Sensor/Core/Src/dma.c This file provides code for the configuration
of all the requested memory to memory DMA transfers.
- Sensor/Core/Src/gpio.c This file provides code for the configuration
of all used GPIO pins.
- Sensor/Core/Src/main.c : Main program body
- Sensor/Core/Src/rtc.c This file provides code for the configuration
of the RTC instances.
- Sensor/Core/Src/stm32wlxx_hal_msp.c This file provides code for the MSP Initialization
and de-Initialization codes.
- Sensor/Core/Src/stm32wlxx_it.c Interrupt Service Routines.
- Sensor/Core/Src/stm32_lpm_if.c Low layer function to enter/exit low power modes (stop, sleep)
- Sensor/Core/Src/subghz.c This file provides code for the configuration
of the SUBGHZ instances.
- Sensor/Core/Src/system_stm32wlxx.c CMSIS Cortex Device Peripheral Access Layer System Source File
- Sensor/Core/Src/sys_app.c Initializes HW and SW system entities (not related to the radio)
- Sensor/Core/Src/sys_debug.c Configure probes pins RealTime debugging and JTAG/SerialWires for LowPower
- Sensor/Core/Src/timer_if.c Configure RTC Alarm, Tick and Calendar manager
- Sensor/Core/Src/usart.c This file provides code for the configuration
of the USART instances.
- Sensor/Core/Src/usart_if.c Configuration of UART driver interface for hyperterminal communication
- Sensor/STM32CubeIDE/Application/Core/syscalls.c STM32CubeIDE Minimal System calls file
- Sensor/STM32CubeIDE/Application/Core/sysmem.c STM32CubeIDE System Memory calls file
- Sensor/SubGHz_Phy/App/demo_sensor.c Concentrator behavior module for STM32WL Concentrator Demo.
- Sensor/SubGHz_Phy/App/meters.c Metering module. Measures sensor data.
- Sensor/SubGHz_Phy/Target/radio_board_if.c This file provides an interface layer between MW and Radio Board
@par Hardware and Software environment
- This example runs on the B-WL5M-SUBG1 Connectivity Expansion Board.
- B-WL5M-SUBG1 Connectivity Expansion Board Set-up
- Connect the Connectivity Expansion Board to your PC with an external STLINK-V3SET.
- Please ensure that the B-WL5M-SUBG1 is supplied.
- Configure the software via the configuration files:
- sys_conf.h, radio_conf.h, mw_log_conf.h, main.h, etc
-Set Up:
-------------------------- V V --------------------------
| Demo/Sensor | | | | Demo/Concentrator |
| | | | | |
ComPort<--| |--| |--| |-->ComPort
| | | |
-------------------------- --------------------------
@par How to use it ?
In order to make the program work, you must do the following :
- Open your preferred toolchain
- Rebuild all files and load your image into target memory
- Run the example
- Open a Terminal, connected the Demo/Sensor
- UART Config = 9600, 8b, 1 stopbit, no parity, no flow control
- Terminal Config: Select 'CR+LF' for Transmit New-Line and switch 'Local echo' on
- Use another Nucleo with Demo/Concentrator binary (please see Demo/Concentrator project) and start it with AT+BEACON_ON (default beacon frequency is EU)
- the Demo/Sensor will automatically acquire the beacon and a time slot will be reserved.
- the Demo/Sensor will send sensor data at reserved time slot.
@par How to debug ?
- make sure the flag DEBUGGER_ENABLED to 1 in sys_conf.h
- simpler to define the flag LOW_POWER_DISABLE to 1 as well
- compile, download and attach
* <h3><center>© COPYRIGHT STMicroelectronics</center></h3>
*/
378e461e46