491 lines
15 KiB
C
491 lines
15 KiB
C
/* USER CODE BEGIN Header */
|
|
/**
|
|
******************************************************************************
|
|
* @file I2C/I2C_TwoBoards_ComIT/Src/main.c
|
|
* @author MCD Application Team
|
|
* @brief This sample code shows how to use STM32WLxx I2C HAL API to transmit
|
|
* and receive a data buffer with a communication process based on
|
|
* IT transfer.
|
|
* The communication is done using 2 Boards.
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* Copyright (c) 2020 STMicroelectronics.
|
|
* All rights reserved.
|
|
*
|
|
* This software is licensed under terms that can be found in the LICENSE file
|
|
* in the root directory of this software component.
|
|
* If no LICENSE file comes with this software, it is provided AS-IS.
|
|
*
|
|
******************************************************************************
|
|
*/
|
|
/* USER CODE END Header */
|
|
/* Includes ------------------------------------------------------------------*/
|
|
#include "main.h"
|
|
|
|
/* Private includes ----------------------------------------------------------*/
|
|
/* USER CODE BEGIN Includes */
|
|
/* USER CODE END Includes */
|
|
|
|
/* Private typedef -----------------------------------------------------------*/
|
|
/* USER CODE BEGIN PTD */
|
|
|
|
/* USER CODE END PTD */
|
|
|
|
/* Private define ------------------------------------------------------------*/
|
|
/* USER CODE BEGIN PD */
|
|
/* Uncomment this line to use the board as master, if not it is used as slave */
|
|
//#define MASTER_BOARD
|
|
/* USER CODE END PD */
|
|
|
|
/* Private macro -------------------------------------------------------------*/
|
|
/* USER CODE BEGIN PM */
|
|
|
|
/* USER CODE END PM */
|
|
|
|
/* Private variables ---------------------------------------------------------*/
|
|
I2C_HandleTypeDef hi2c1;
|
|
|
|
/* USER CODE BEGIN PV */
|
|
/* Buffer used for transmission */
|
|
uint8_t aTxBuffer[] = " ****I2C_TwoBoards communication based on IT**** ****I2C_TwoBoards communication based on IT**** ****I2C_TwoBoards communication based on IT**** ";
|
|
|
|
/* Buffer used for reception */
|
|
uint8_t aRxBuffer[RXBUFFERSIZE];
|
|
/* USER CODE END PV */
|
|
|
|
/* Private function prototypes -----------------------------------------------*/
|
|
void SystemClock_Config(void);
|
|
static void MX_GPIO_Init(void);
|
|
static void MX_I2C1_Init(void);
|
|
/* USER CODE BEGIN PFP */
|
|
/* Private function prototypes -----------------------------------------------*/
|
|
static uint16_t Buffercmp(uint8_t *pBuffer1, uint8_t *pBuffer2, uint16_t BufferLength);
|
|
|
|
/* USER CODE END PFP */
|
|
|
|
/* Private user code ---------------------------------------------------------*/
|
|
/* USER CODE BEGIN 0 */
|
|
|
|
/* USER CODE END 0 */
|
|
|
|
/**
|
|
* @brief The application entry point.
|
|
* @retval int
|
|
*/
|
|
int main(void)
|
|
{
|
|
/* USER CODE BEGIN 1 */
|
|
/* STM32WLxx HAL library initialization:
|
|
- Configure the Flash prefetch
|
|
- Systick timer is configured by default as source of time base, but user
|
|
can eventually implement his proper time base source (a general purpose
|
|
timer for example or other time source), keeping in mind that Time base
|
|
duration should be kept 1ms since PPP_TIMEOUT_VALUEs are defined and
|
|
handled in milliseconds basis.
|
|
- Set NVIC Group Priority to 4
|
|
- Low Level Initialization
|
|
*/
|
|
/* USER CODE END 1 */
|
|
|
|
/* MCU Configuration--------------------------------------------------------*/
|
|
|
|
/* Reset of all peripherals, Initializes the Flash interface and the Systick. */
|
|
HAL_Init();
|
|
|
|
/* USER CODE BEGIN Init */
|
|
|
|
/* USER CODE END Init */
|
|
|
|
/* Configure the system clock */
|
|
SystemClock_Config();
|
|
|
|
/* USER CODE BEGIN SysInit */
|
|
|
|
/* USER CODE END SysInit */
|
|
|
|
/* Initialize all configured peripherals */
|
|
MX_GPIO_Init();
|
|
MX_I2C1_Init();
|
|
/* USER CODE BEGIN 2 */
|
|
/* Configure LED2 and LED3 */
|
|
BSP_LED_Init(LED2);
|
|
BSP_LED_Init(LED3);
|
|
|
|
|
|
#ifdef MASTER_BOARD
|
|
|
|
/* Configure User push-button (B1) */
|
|
BSP_PB_Init(BUTTON_SW1, BUTTON_MODE_GPIO);
|
|
/* USER CODE END 2 */
|
|
|
|
/* Infinite loop */
|
|
/* USER CODE BEGIN WHILE */
|
|
/* Wait for User push-button (B1) press before starting the Communication */
|
|
while (BSP_PB_GetState(BUTTON_SW1) != GPIO_PIN_RESET)
|
|
{
|
|
}
|
|
|
|
/* Delay to avoid that possible signal rebound is taken as button release */
|
|
HAL_Delay(50);
|
|
|
|
/* Wait for User push-button (B1) release before starting the Communication */
|
|
while (BSP_PB_GetState(BUTTON_SW1) != GPIO_PIN_SET)
|
|
{
|
|
}
|
|
|
|
/* The board sends the message and expects to receive it back */
|
|
|
|
/*##- Start the transmission process #####################################*/
|
|
/* While the I2C in reception process, user can transmit data through
|
|
"aTxBuffer" buffer */
|
|
do
|
|
{
|
|
if (HAL_I2C_Master_Transmit_IT(&hi2c1, (uint16_t)I2C_ADDRESS, (uint8_t *)aTxBuffer, TXBUFFERSIZE) != HAL_OK)
|
|
{
|
|
/* Error_Handler() function is called when error occurs. */
|
|
Error_Handler();
|
|
}
|
|
|
|
/*##- Wait for the end of the transfer #################################*/
|
|
/* Before starting a new communication transfer, you need to check the current
|
|
state of the peripheral; if it is busy you need to wait for the end of current
|
|
transfer before starting a new one.
|
|
For simplicity reasons, this example is just waiting till the end of the
|
|
transfer, but application may perform other tasks while transfer operation
|
|
is ongoing. */
|
|
while (HAL_I2C_GetState(&hi2c1) != HAL_I2C_STATE_READY)
|
|
{
|
|
}
|
|
|
|
/* When Acknowledge failure occurs (Slave don't acknowledge it's address)
|
|
Master restarts communication */
|
|
}
|
|
while (HAL_I2C_GetError(&hi2c1) == HAL_I2C_ERROR_AF);
|
|
|
|
/* Wait for User push-button (B1) press before starting the Communication */
|
|
while (BSP_PB_GetState(BUTTON_SW1) != GPIO_PIN_RESET)
|
|
{
|
|
}
|
|
|
|
/* Delay to avoid that possible signal rebound is taken as button release */
|
|
HAL_Delay(50);
|
|
|
|
/* Wait for User push-button (B1) release before starting the Communication */
|
|
while (BSP_PB_GetState(BUTTON_SW1) != GPIO_PIN_SET)
|
|
{
|
|
}
|
|
|
|
/*##- Put I2C peripheral in reception process ###########################*/
|
|
do
|
|
{
|
|
if (HAL_I2C_Master_Receive_IT(&hi2c1, (uint16_t)I2C_ADDRESS, (uint8_t *)aRxBuffer, RXBUFFERSIZE) != HAL_OK)
|
|
{
|
|
/* Error_Handler() function is called when error occurs. */
|
|
Error_Handler();
|
|
}
|
|
|
|
/*##- Wait for the end of the transfer #################################*/
|
|
/* Before starting a new communication transfer, you need to check the current
|
|
state of the peripheral; if it is busy you need to wait for the end of current
|
|
transfer before starting a new one.
|
|
For simplicity reasons, this example is just waiting till the end of the
|
|
transfer, but application may perform other tasks while transfer operation
|
|
is ongoing. */
|
|
while (HAL_I2C_GetState(&hi2c1) != HAL_I2C_STATE_READY)
|
|
{
|
|
}
|
|
|
|
/* When Acknowledge failure occurs (Slave don't acknowledge it's address)
|
|
Master restarts communication */
|
|
}
|
|
while (HAL_I2C_GetError(&hi2c1) == HAL_I2C_ERROR_AF);
|
|
|
|
#else
|
|
|
|
/* The board receives the message and sends it back */
|
|
|
|
/*##- Put I2C peripheral in reception process ###########################*/
|
|
if (HAL_I2C_Slave_Receive_IT(&hi2c1, (uint8_t *)aRxBuffer, RXBUFFERSIZE) != HAL_OK)
|
|
{
|
|
/* Transfer error in reception process */
|
|
Error_Handler();
|
|
}
|
|
|
|
/*##- Wait for the end of the transfer ###################################*/
|
|
/* Before starting a new communication transfer, you need to check the current
|
|
state of the peripheral; if it is busy you need to wait for the end of current
|
|
transfer before starting a new one.
|
|
For simplicity reasons, this example is just waiting till the end of the
|
|
transfer, but application may perform other tasks while transfer operation
|
|
is ongoing. */
|
|
while (HAL_I2C_GetState(&hi2c1) != HAL_I2C_STATE_READY)
|
|
{
|
|
}
|
|
|
|
/*##- Start the transmission process #####################################*/
|
|
/* While the I2C in reception process, user can transmit data through
|
|
"aTxBuffer" buffer */
|
|
if (HAL_I2C_Slave_Transmit_IT(&hi2c1, (uint8_t *)aTxBuffer, TXBUFFERSIZE) != HAL_OK)
|
|
{
|
|
/* Transfer error in transmission process */
|
|
Error_Handler();
|
|
}
|
|
|
|
#endif /* MASTER_BOARD */
|
|
|
|
/*##- Wait for the end of the transfer ###################################*/
|
|
/* Before starting a new communication transfer, you need to check the current
|
|
state of the peripheral; if it is busy you need to wait for the end of current
|
|
transfer before starting a new one.
|
|
For simplicity reasons, this example is just waiting till the end of the
|
|
transfer, but application may perform other tasks while transfer operation
|
|
is ongoing. */
|
|
while (HAL_I2C_GetState(&hi2c1) != HAL_I2C_STATE_READY)
|
|
{
|
|
}
|
|
|
|
/*##- Compare the sent and received buffers ##############################*/
|
|
if (Buffercmp((uint8_t *)aTxBuffer, (uint8_t *)aRxBuffer, RXBUFFERSIZE))
|
|
{
|
|
/* Processing Error */
|
|
Error_Handler();
|
|
}
|
|
|
|
/* Infinite loop */
|
|
while (1)
|
|
{
|
|
/* USER CODE END WHILE */
|
|
|
|
/* USER CODE BEGIN 3 */
|
|
|
|
}
|
|
/* USER CODE END 3 */
|
|
}
|
|
|
|
/**
|
|
* @brief System Clock Configuration
|
|
* @retval None
|
|
*/
|
|
void SystemClock_Config(void)
|
|
{
|
|
RCC_OscInitTypeDef RCC_OscInitStruct = {0};
|
|
RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
|
|
|
|
/** Configure the main internal regulator output voltage
|
|
*/
|
|
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
|
|
|
|
/** Initializes the CPU, AHB and APB buses clocks
|
|
*/
|
|
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_MSI;
|
|
RCC_OscInitStruct.MSIState = RCC_MSI_ON;
|
|
RCC_OscInitStruct.MSICalibrationValue = RCC_MSICALIBRATION_DEFAULT;
|
|
RCC_OscInitStruct.MSIClockRange = RCC_MSIRANGE_11;
|
|
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE;
|
|
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
|
|
{
|
|
Error_Handler();
|
|
}
|
|
/** Configure the SYSCLKSource, HCLK, PCLK1 and PCLK2 clocks dividers
|
|
*/
|
|
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK3|RCC_CLOCKTYPE_HCLK
|
|
|RCC_CLOCKTYPE_SYSCLK|RCC_CLOCKTYPE_PCLK1
|
|
|RCC_CLOCKTYPE_PCLK2;
|
|
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_MSI;
|
|
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
|
|
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1;
|
|
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;
|
|
RCC_ClkInitStruct.AHBCLK3Divider = RCC_SYSCLK_DIV1;
|
|
|
|
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2) != HAL_OK)
|
|
{
|
|
Error_Handler();
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief I2C1 Initialization Function
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
static void MX_I2C1_Init(void)
|
|
{
|
|
|
|
/* USER CODE BEGIN I2C1_Init 0 */
|
|
|
|
/* USER CODE END I2C1_Init 0 */
|
|
|
|
/* USER CODE BEGIN I2C1_Init 1 */
|
|
|
|
/* USER CODE END I2C1_Init 1 */
|
|
hi2c1.Instance = I2C1;
|
|
hi2c1.Init.Timing = 0x0030081C;
|
|
hi2c1.Init.OwnAddress1 = I2C_ADDRESS;
|
|
hi2c1.Init.AddressingMode = I2C_ADDRESSINGMODE_10BIT;
|
|
hi2c1.Init.DualAddressMode = I2C_DUALADDRESS_DISABLE;
|
|
hi2c1.Init.OwnAddress2 = 0;
|
|
hi2c1.Init.OwnAddress2Masks = I2C_OA2_NOMASK;
|
|
hi2c1.Init.GeneralCallMode = I2C_GENERALCALL_DISABLE;
|
|
hi2c1.Init.NoStretchMode = I2C_NOSTRETCH_DISABLE;
|
|
if (HAL_I2C_Init(&hi2c1) != HAL_OK)
|
|
{
|
|
Error_Handler();
|
|
}
|
|
/** Configure Analogue filter
|
|
*/
|
|
if (HAL_I2CEx_ConfigAnalogFilter(&hi2c1, I2C_ANALOGFILTER_ENABLE) != HAL_OK)
|
|
{
|
|
Error_Handler();
|
|
}
|
|
/** Configure Digital filter
|
|
*/
|
|
if (HAL_I2CEx_ConfigDigitalFilter(&hi2c1, 0) != HAL_OK)
|
|
{
|
|
Error_Handler();
|
|
}
|
|
/** I2C Fast mode Plus enable
|
|
*/
|
|
HAL_I2CEx_EnableFastModePlus(I2C_FASTMODEPLUS_I2C1);
|
|
/* USER CODE BEGIN I2C1_Init 2 */
|
|
|
|
/* USER CODE END I2C1_Init 2 */
|
|
|
|
}
|
|
|
|
/**
|
|
* @brief GPIO Initialization Function
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
static void MX_GPIO_Init(void)
|
|
{
|
|
|
|
/* GPIO Ports Clock Enable */
|
|
__HAL_RCC_GPIOB_CLK_ENABLE();
|
|
|
|
}
|
|
|
|
/* USER CODE BEGIN 4 */
|
|
/**
|
|
* @brief Compares two buffers.
|
|
* @param pBuffer1, pBuffer2: buffers to be compared.
|
|
* @param BufferLength: buffer's length
|
|
* @retval 0 : pBuffer1 identical to pBuffer2
|
|
* >0 : pBuffer1 differs from pBuffer2
|
|
*/
|
|
static uint16_t Buffercmp(uint8_t *pBuffer1, uint8_t *pBuffer2, uint16_t BufferLength)
|
|
{
|
|
while (BufferLength--)
|
|
{
|
|
if ((*pBuffer1) != *pBuffer2)
|
|
{
|
|
return BufferLength;
|
|
}
|
|
pBuffer1++;
|
|
pBuffer2++;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* @brief Tx Transfer completed callback.
|
|
* @param I2cHandle: I2C handle.
|
|
* @note This example shows a simple way to report end of IT Tx transfer, and
|
|
* you can add your own implementation.
|
|
* @retval None
|
|
*/
|
|
#ifdef MASTER_BOARD
|
|
void HAL_I2C_MasterTxCpltCallback(I2C_HandleTypeDef *I2cHandle)
|
|
{
|
|
/* Toggle LED2: Transfer in transmission process is correct */
|
|
BSP_LED_Toggle(LED2);
|
|
}
|
|
#else
|
|
void HAL_I2C_SlaveTxCpltCallback(I2C_HandleTypeDef *I2cHandle)
|
|
{
|
|
/* Toggle LED2: Transfer in transmission process is correct */
|
|
BSP_LED_Toggle(LED2);
|
|
}
|
|
#endif /* MASTER_BOARD */
|
|
|
|
/**
|
|
* @brief Rx Transfer completed callback.
|
|
* @param I2cHandle: I2C handle
|
|
* @note This example shows a simple way to report end of IT Rx transfer, and
|
|
* you can add your own implementation.
|
|
* @retval None
|
|
*/
|
|
#ifdef MASTER_BOARD
|
|
void HAL_I2C_MasterRxCpltCallback(I2C_HandleTypeDef *I2cHandle)
|
|
{
|
|
/* Toggle LED2: Transfer in reception process is correct */
|
|
BSP_LED_Toggle(LED2);
|
|
}
|
|
#else
|
|
void HAL_I2C_SlaveRxCpltCallback(I2C_HandleTypeDef *I2cHandle)
|
|
{
|
|
/* Toggle LED2: Transfer in reception process is correct */
|
|
BSP_LED_Toggle(LED2);
|
|
}
|
|
#endif /* MASTER_BOARD */
|
|
|
|
/**
|
|
* @brief I2C error callbacks.
|
|
* @param I2cHandle: I2C handle
|
|
* @note This example shows a simple way to report transfer error, and you can
|
|
* add your own implementation.
|
|
* @retval None
|
|
*/
|
|
void HAL_I2C_ErrorCallback(I2C_HandleTypeDef *I2cHandle)
|
|
{
|
|
/** Error_Handler() function is called when error occurs.
|
|
* 1- When Slave doesn't acknowledge its address, Master restarts communication.
|
|
* 2- When Master doesn't acknowledge the last data transferred, Slave doesn't care in this example.
|
|
*/
|
|
if (HAL_I2C_GetError(I2cHandle) != HAL_I2C_ERROR_AF)
|
|
{
|
|
/* Turn Off LED2 */
|
|
BSP_LED_Off(LED2);
|
|
|
|
/* Turn On LED3 */
|
|
BSP_LED_On(LED3);
|
|
}
|
|
}
|
|
|
|
/* USER CODE END 4 */
|
|
|
|
/**
|
|
* @brief This function is executed in case of error occurrence.
|
|
* @retval None
|
|
*/
|
|
void Error_Handler(void)
|
|
{
|
|
/* USER CODE BEGIN Error_Handler_Debug */
|
|
/* Turn LED3 on */
|
|
BSP_LED_On(LED3);
|
|
while (1)
|
|
{
|
|
}
|
|
/* USER CODE END Error_Handler_Debug */
|
|
}
|
|
|
|
#ifdef USE_FULL_ASSERT
|
|
/**
|
|
* @brief Reports the name of the source file and the source line number
|
|
* where the assert_param error has occurred.
|
|
* @param file: pointer to the source file name
|
|
* @param line: assert_param error line source number
|
|
* @retval None
|
|
*/
|
|
void assert_failed(uint8_t *file, uint32_t line)
|
|
{
|
|
/* USER CODE BEGIN 6 */
|
|
/* User can add his own implementation to report the file name and line number,
|
|
ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
|
|
Error_Handler();
|
|
/* USER CODE END 6 */
|
|
}
|
|
#endif /* USE_FULL_ASSERT */
|