96 lines
3.8 KiB
Plaintext
96 lines
3.8 KiB
Plaintext
/**
|
|
@page ADC_AnalogWatchdog_Init ADC example
|
|
|
|
@verbatim
|
|
******************************************************************************
|
|
* @file Examples_LL/ADC/ADC_AnalogWatchdog_Init/readme.txt
|
|
* @author MCD Application Team
|
|
* @brief Description of the ADC_AnalogWatchdog_Init example.
|
|
******************************************************************************
|
|
*
|
|
* Copyright (c) 2020 STMicroelectronics. All rights reserved.
|
|
*
|
|
* This software component is licensed by ST under BSD 3-Clause license,
|
|
* the "License"; You may not use this file except in compliance with the
|
|
* License. You may obtain a copy of the License at:
|
|
* opensource.org/licenses/BSD-3-Clause
|
|
*
|
|
******************************************************************************
|
|
@endverbatim
|
|
|
|
@par Example Description
|
|
|
|
How to use an ADC peripheral with an ADC analog watchdog to monitor a channel
|
|
and detect when the corresponding conversion data is outside the window
|
|
thresholds.
|
|
This example is based on the STM32WLxx ADC LL API.
|
|
The peripheral initialization is done using LL unitary service functions
|
|
for optimization purposes (performance and size).
|
|
|
|
Example configuration:
|
|
ADC is configured to convert a single channel, in continuous conversion mode,
|
|
from SW trigger.
|
|
Analog watchdog is configured to monitor all channels on group regular
|
|
(therefore, including the selected channel),
|
|
low threshold is set to 0V and high threshold is set to Vdda/2.
|
|
ADC interruption enabled: Analog watchdog 1.
|
|
|
|
Example execution:
|
|
From the main program execution, the ADC converts the selected channel continuously.
|
|
When conversion data is out of analog watchdog window, ADC interruption occurs.
|
|
Into analog watchdog callback function, a status variable is set
|
|
and LED2 is updated.
|
|
LED2 state:
|
|
- LED remains turned-off if voltage is within AWD window (analog watchdog not triggered)
|
|
- LED turned-on if voltage is out of AWD window
|
|
At each press on User push-button (B1), the ADC analog watchdog is rearmed to be ready
|
|
for another trig.
|
|
|
|
LED2 is blinking every 1 sec in case of error.
|
|
|
|
Note: In case of noise on voltage applied on ADC channel input (due to connectors and wires parasitics),
|
|
ADC analog watchdog may trig at a voltage level with an uncertainty of tens of mV.
|
|
|
|
For debug: variables to monitor with debugger watch window:
|
|
- "ubAnalogWatchdog1Status": analog watchdog state
|
|
|
|
Connection needed: use an external power supply, adjust supply voltage and connect
|
|
it to analog input pin (cf pin below).
|
|
|
|
Other peripherals used:
|
|
1 GPIO for User push-button (B1)
|
|
1 GPIO for LED2
|
|
1 GPIO for analog input: PB.02 (Arduino connector CN8 pin A1, Morpho connector CN7 pin 30)
|
|
|
|
@par Keywords
|
|
|
|
ADC, analog digital converter, analog, conversion, voltage, channel, analog input, trigger, analog watchdog, threshold, window
|
|
|
|
@par Directory contents
|
|
|
|
- ADC/ADC_AnalogWatchdog_Init/Inc/stm32wlxx_it.h Interrupt handlers header file
|
|
- ADC/ADC_AnalogWatchdog_Init/Inc/main.h Header for main.c module
|
|
- ADC/ADC_AnalogWatchdog_Init/Inc/stm32_assert.h Template file to include assert_failed function
|
|
- ADC/ADC_AnalogWatchdog_Init/Src/stm32wlxx_it.c Interrupt handlers
|
|
- ADC/ADC_AnalogWatchdog_Init/Src/main.c Main program
|
|
- ADC/ADC_AnalogWatchdog_Init/Src/system_stm32wlxx.c STM32WLxx system source file
|
|
|
|
|
|
@par Hardware and Software environment
|
|
|
|
- This example runs on STM32WL55JCIx devices.
|
|
|
|
- This example has been tested with NUCLEO-WL55JC RevC board and can be
|
|
easily tailored to any other supported device and development board.
|
|
|
|
|
|
@par How to use it ?
|
|
|
|
In order to make the program work, you must do the following :
|
|
- Open your preferred toolchain
|
|
- Rebuild all files and load your image into target memory
|
|
- Run the example
|
|
|
|
* <h3><center>© COPYRIGHT STMicroelectronics</center></h3>
|
|
*/
|