67 lines
2.8 KiB
Plaintext
67 lines
2.8 KiB
Plaintext
/**
|
|
@page WWDG_RefreshUntilUserEvent_Init WWDG example
|
|
|
|
@verbatim
|
|
******************************************************************************
|
|
* @file Examples_LL/WWDG/WWDG_RefreshUntilUserEvent_Init/readme.txt
|
|
* @author MCD Application Team
|
|
* @brief Description of the WWDG_RefreshUntilUserEvent_Init example.
|
|
******************************************************************************
|
|
*
|
|
* Copyright (c) 2020 STMicroelectronics. All rights reserved.
|
|
*
|
|
* This software component is licensed by ST under BSD 3-Clause license,
|
|
* the "License"; You may not use this file except in compliance with the
|
|
* License. You may obtain a copy of the License at:
|
|
* opensource.org/licenses/BSD-3-Clause
|
|
*
|
|
******************************************************************************
|
|
@endverbatim
|
|
|
|
@par Example Description
|
|
|
|
Configuration of the WWDG to periodically update the counter and
|
|
generate an MCU WWDG reset when a user button is pressed. The peripheral initialization
|
|
uses the LL unitary service functions for optimization purposes (performance and size).
|
|
|
|
Example Configuration:
|
|
Configure the WWDG (Window, Prescaler & Counter) and enable it.
|
|
Refresh the WWDG downcounter in the main loop - LED2 is blinking fastly & continuously
|
|
|
|
Example Execution:
|
|
When User push-button (B1) is pressed, the Downcounter automatic refresh mechanism is disable and thus, reset will occur.
|
|
After a reset when re-entering in the main, RCC WWDG Reset Flag will be checked and if we are back from a WWDG reset the LED2 will be switch ON.
|
|
|
|
Waiting a new User push-button (B1) pressed to re-activate the WWDG
|
|
|
|
@par Keywords
|
|
|
|
System, WWDG, Timeout, Refresh, Counter update, MCU Reset, Downcounter, Event, Window
|
|
|
|
@par Directory contents
|
|
|
|
- WWDG/WWDG_RefreshUntilUserEvent_Init/Inc/stm32wlxx_it.h Interrupt handlers header file
|
|
- WWDG/WWDG_RefreshUntilUserEvent_Init/Inc/main.h Header for main.c module
|
|
- WWDG/WWDG_RefreshUntilUserEvent_Init/Inc/stm32_assert.h Template file to include assert_failed function
|
|
- WWDG/WWDG_RefreshUntilUserEvent_Init/Src/stm32wlxx_it.c Interrupt handlers
|
|
- WWDG/WWDG_RefreshUntilUserEvent_Init/Src/main.c Main program
|
|
- WWDG/WWDG_RefreshUntilUserEvent_Init/Src/system_stm32wlxx.c STM32WLxx system source file
|
|
|
|
|
|
@par Hardware and Software environment
|
|
|
|
- This example runs on STM32WL55JCIx devices.
|
|
|
|
- This example has been tested with NUCLEO-WL55JC RevC board and can be
|
|
easily tailored to any other supported device and development board.
|
|
|
|
@par How to use it ?
|
|
|
|
In order to make the program work, you must do the following :
|
|
- Open your preferred toolchain
|
|
- Rebuild all files and load your image into target memory
|
|
- Run the example
|
|
|
|
* <h3><center>© COPYRIGHT STMicroelectronics</center></h3>
|
|
*/
|