updated readme.txt

Core/Src/yunhorn_sts_presence_sensor.c

@@ -183,7 +183,7 @@ void STS_FallDetection_LampBarProcess(void)
 	APP_LOG(TS_OFF, VLEVEL_L, "\r\n <<<<<<<<<<<<<< Fall Rise state=%d, send buf size = %d \r\n",
 			sts_fall_rising_detected_result, i )
 
-	STS_SENSOR_Upload_Message((LORAWAN_USER_APP_PORT+2), i, buf);
+	STS_SENSOR_Upload_Message((LORAWAN_USER_APP_PORT+2), i, (char*)buf);
 
 	sts_fall_rising_detected_result = STS_PRESENCE_NONE;
 

STM32CubeIDE/Release/objects.list

@@ -5,6 +5,8 @@
 "./Application/User/Core/adc_if.o"
 "./Application/User/Core/cmox_low_level.o"
 "./Application/User/Core/dma.o"
+"./Application/User/Core/example_multiple_service_usage.o"
+"./Application/User/Core/example_service_sparse.o"
 "./Application/User/Core/flash_if.o"
 "./Application/User/Core/gpio.o"
 "./Application/User/Core/main.o"

readme.txt

@@ -1,16 +1,14 @@
+/* USER CODE BEGIN Header */
 /**
-  @page LoRaWAN_End_Node Readme file
+   ******************************************************************************
-
+  * @file:   README.TXT															   *
-  @verbatim
+  * @author  Yunhorn (r) Technology Limited Application Team	               *
-  ******************************************************************************
+  * @brief   Yunhorn (r) SmarToilets (r) Product configuration file.		   *
-  * @file    Applications/LoRaWAN/LoRaWAN_End_Node/readme.txt
-  * @author  MCD Application Team
-  * @brief   This application is a simple demo application software of a LoRa
-  *          modem connecting to Network server. Data sent can be checked on
-  *          Network server for eg Loriot. Traces are displayed over UART
   ******************************************************************************
+  * @attention
   *
-  * Copyright (c) 2020-2021 STMicroelectronics.
+  * Copyright (c) 2023 Yunhorn Technology Limited.
+  * Copyright (c) 2023 Shenzhen Yunhorn Technology Co., Ltd.
   * All rights reserved.
   *
   * This software is licensed under terms that can be found in the LICENSE file
@@ -18,7 +16,10 @@
   * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
-  @endverbatim
+  */
+  
+/**
+  @page LoRaWAN_End_Node Readme file
 
 @par Description
 
@@ -116,61 +117,4 @@ Applications, SubGHz_Phy, LoRaWAN, End_Node, SingleCore
 
 @par Hardware and Software environment
 
-  - This example runs on the STM32WLxx Nucleo boards. Both NUCLEO-WL55JC1 (HIGH-BAND) and NUCLEO-WL55JC2 (LOW-BAND) are suitable.
-
-  - STM32WLxx Nucleo board Set-up
-    - Connect the Nucleo board to your PC with a USB cable type A to micro-B
-      to ST-LINK connector.
-    - Please ensure that the ST-LINK connector jumpers are fitted.
-
-  - Configure the software via the configuration files:
-    - sys_conf.h, radio_conf.h, lorawan_conf.h, lora_app.c, lora_app.h, Commissioning.h, se-identity.h, mw_log_conf.h, main.h, etc
-    - Careful:
-        - the region and class chosen on LoRaWAN/App/lora_app.h shall be compatible with LoRaWAN/Target/lorawan_conf.h list
-
-  -Set Up:
-
-             --------------------------  V    V  --------------------------
-             |      LoRa Object       |  |    |  |      LoRa Network      |
-             |                        |  |    |  |                        |
-   ComPort<--|                        |--|    |--|                        |-->Web Server
-             |                        |          |                        |
-             --------------------------          --------------------------
-
-@par How to use it ?
-In order to make the program work, you must do the following :
-  - Open your preferred toolchain
-  - Rebuild all files and load your image into target memory
-  - Run the example
-  - Open a Terminal, connected the LoRa Object
-  - UART Config = 115200, 8b, 1 stopbit, no parity, no flow control
-
-@par How to debug ?
-  - make sure the flag DEBUGGER_ENABLED to 1 in sys_conf.h
-  - simpler to define the flag LOW_POWER_DISABLE to 1 as well
-  - compile, download and attach
-
-@par How to use MX to modify some RF middleware and application settings
-  This example is compatible (with some problems/limitations) with STM32CubeMX 
-  and the RF application and middleware configuration can be modified via GUI. Few warnings and guidelines:
-  - ioc file is provided in the project directory and can be opened with STM32CubeMX v6.7.0 or higher.
-  - warning: when regenerating with the provided ioc file, 
-    the IDE projects are regenerated and paths to HAL and MWs files from STM32Cube/Repository location are erroneously added; to avoid that, 
-    user shall uncheck the "Use Default Firmware Location" in the GUI "Project-Manager" panel
-    and shall replace "Firmware Relative Path" with the root directory of the STM32CubeWL firmware package  (e.g. C:\myDir\STM32Cube_FW_WL_V1.3.0\);
-    problem will be fixed in next STM32CubeMX version.
-  - .extSettings file allows to add to the generated IDE projects additional files not generated natively by MX (e.g. BSP files).
-  - when regenerating on existing code and existing linker files:
-    - STM32CubeMX updates the existing project content and preserves linker files.
-    - STM32CubeMX does not update the USER CODE sections (lines between /* USER CODE BEGIN Xxx */ and /* USER CODE END Xxx */).
-  - when regenerating after copying only the ioc file in an empty directory:
-    - STM32CubeMX generates default project files and default linker files. (Please check original linker file from project directory)
-    - it is up to the user to to fill the USER CODE sections with his application code.
-
-@par How to use it with Azure ThreadX RTOS?
-  This example can be combined with Azure ThreadX RTOS via STM32CubeMX. The video tutorial:
-  "STM32WL - How to port an existing RF application on Azure ThreadX RTOS"
-  is available on https://www.youtube.com/playlist?list=PLnMKNibPkDnE2eaR-ZGM3ZJXadyQLtTpX
-
- * <h3><center>&copy; COPYRIGHT STMicroelectronics</center></h3>
  */