updated display, work fine display and get temperature values, display
with 2/3 of height
This commit is contained in:
parent
959cfeec63
commit
10a012c390
|
|
@ -44,7 +44,11 @@ void MX_DMA_Init(void)
|
|||
__HAL_RCC_DMA1_CLK_ENABLE();
|
||||
|
||||
/* DMA interrupt init */
|
||||
#if 1
|
||||
|
||||
/* DMA1_Channel1_IRQn interrupt configuration */
|
||||
HAL_NVIC_SetPriority(DMA1_Channel1_IRQn, 0, 0);
|
||||
HAL_NVIC_EnableIRQ(DMA1_Channel1_IRQn);
|
||||
#if 0
|
||||
/* DMA1_Channel2_IRQn interrupt configuration */
|
||||
HAL_NVIC_SetPriority(DMA1_Channel2_IRQn, 0, 0);
|
||||
HAL_NVIC_EnableIRQ(DMA1_Channel2_IRQn);
|
||||
|
|
|
|||
|
|
@ -131,36 +131,43 @@ int main(void)
|
|||
MX_LoRaWAN_Init();
|
||||
/* USER CODE BEGIN 2 */
|
||||
//MX_ADC_Init();
|
||||
MX_SPI_Init();
|
||||
MX_GPIO_Init();
|
||||
MX_DMA_Init();
|
||||
MX_SPI_Init();
|
||||
|
||||
|
||||
MX_I2C_Init();
|
||||
|
||||
//MX_DMA_Init();
|
||||
|
||||
APP_LOG(TS_OFF, VLEVEL_L, "START LCD init....\r\n");
|
||||
|
||||
BSP_LCD_Init();
|
||||
|
||||
BSP_LCD_DisplayOn();
|
||||
//HAL_Delay(2000);
|
||||
//BSP_LCD_DisplayOff();
|
||||
BSP_LCD_Test();
|
||||
|
||||
MLX90640_I2CInit();
|
||||
mlx90640_display_init();
|
||||
|
||||
#if 0
|
||||
APP_LOG(TS_OFF, VLEVEL_L, "DISPLAY ON....\r\n");
|
||||
BSP_LCD_DisplayOn();
|
||||
BSP_LCD_Clear(LCD_COLOR_YELLOW);
|
||||
APP_LOG(TS_OFF, VLEVEL_L, "WIDTH = %d, HEIGHT =%d \r\n", BSP_LCD_GetXSize(), BSP_LCD_GetYSize());
|
||||
BSP_LCD_DisplayStringAt(45,45,"SmarToilets",LEFT_MODE,LCD_COLOR_BLUE);
|
||||
BSP_LCD_SetRotation(1);
|
||||
|
||||
APP_LOG(TS_OFF, VLEVEL_L, "WIDTH = %d, HEIGHT =%d \r\n", BSP_LCD_GetXSize(), BSP_LCD_GetYSize());
|
||||
BSP_LCD_DisplayStringAt(45,45,"SmarToilets",LEFT_MODE,LCD_COLOR_RED);
|
||||
APP_LOG(TS_OFF, VLEVEL_L, "DISPLAY LOGO....\r\n");
|
||||
BSP_LCD_DisplayStringAt(45,45,"SmarToilets",LEFT_MODE,LCD_COLOR_BLUE);
|
||||
|
||||
#endif
|
||||
while (1)
|
||||
{
|
||||
/* USER CODE END WHILE */
|
||||
|
||||
/* USER CODE BEGIN 3 */
|
||||
//BSP_LCD_DisplayOff();
|
||||
mlx90640_display_process();
|
||||
}
|
||||
//HAL_TIM_PWM_Start(&htim3,TIM_CHANNEL_1);
|
||||
|
|
|
|||
|
|
@ -33,7 +33,10 @@ void MX_SPI_Init(void)
|
|||
{
|
||||
|
||||
/* USER CODE BEGIN SPI1_Init 0 */
|
||||
__HAL_RCC_SPI1_CLK_ENABLE();
|
||||
|
||||
__HAL_RCC_GPIOA_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOB_CLK_ENABLE();
|
||||
/* USER CODE END SPI1_Init 0 */
|
||||
|
||||
/* USER CODE BEGIN SPI1_Init 1 */
|
||||
|
|
@ -41,14 +44,14 @@ void MX_SPI_Init(void)
|
|||
/* USER CODE END SPI1_Init 1 */
|
||||
hspi1.Instance = SPI1;
|
||||
hspi1.Init.Mode = SPI_MODE_MASTER;
|
||||
hspi1.Init.Direction = SPI_DIRECTION_1LINE;
|
||||
hspi1.Init.Direction = SPI_DIRECTION_2LINES;
|
||||
hspi1.Init.DataSize = SPI_DATASIZE_8BIT;
|
||||
hspi1.Init.CLKPolarity = SPI_POLARITY_HIGH;
|
||||
hspi1.Init.CLKPhase = SPI_PHASE_2EDGE;
|
||||
hspi1.Init.NSS = SPI_NSS_SOFT;
|
||||
hspi1.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_2; //SPI_BAUDRATEPRESCALER_64;
|
||||
hspi1.Init.FirstBit = SPI_FIRSTBIT_MSB;
|
||||
hspi1.Init.TIMode = SPI_TIMODE_DISABLE;
|
||||
//hspi1.Init.TIMode = SPI_TIMODE_DISABLE;
|
||||
//hspi1.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE;
|
||||
hspi1.Init.CRCPolynomial = 7;
|
||||
//hspi1.Init.CRCLength = SPI_CRC_LENGTH_DATASIZE;
|
||||
|
|
@ -102,7 +105,7 @@ void HAL_SPI_MspInit(SPI_HandleTypeDef* spiHandle)
|
|||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
||||
GPIO_InitStruct.Alternate = GPIO_AF5_SPI1;
|
||||
HAL_GPIO_Init(MEMS_SPI_SCK_GPIO_Port, &GPIO_InitStruct);
|
||||
#if 1
|
||||
#if 0
|
||||
/* SPI1 DMA Init */
|
||||
/* SPI1_RX Init */
|
||||
hdma_spi1_rx.Instance = DMA1_Channel2;
|
||||
|
|
@ -125,27 +128,28 @@ void HAL_SPI_MspInit(SPI_HandleTypeDef* spiHandle)
|
|||
}
|
||||
|
||||
__HAL_LINKDMA(spiHandle,hdmarx,hdma_spi1_rx);
|
||||
|
||||
#endif
|
||||
#if 1
|
||||
/* SPI1_TX Init */
|
||||
hdma_spi1_tx.Instance = DMA1_Channel3;
|
||||
hdma_spi1_tx.Instance = DMA1_Channel1;
|
||||
hdma_spi1_tx.Init.Request = DMA_REQUEST_SPI1_TX;
|
||||
hdma_spi1_tx.Init.Direction = DMA_MEMORY_TO_PERIPH;
|
||||
hdma_spi1_tx.Init.PeriphInc = DMA_PINC_DISABLE;
|
||||
hdma_spi1_tx.Init.MemInc = DMA_MINC_ENABLE;
|
||||
hdma_spi1_tx.Init.PeriphDataAlignment = DMA_PDATAALIGN_BYTE;
|
||||
hdma_spi1_tx.Init.MemDataAlignment = DMA_MDATAALIGN_BYTE;
|
||||
hdma_spi1_tx.Init.PeriphDataAlignment = DMA_PDATAALIGN_HALFWORD;
|
||||
hdma_spi1_tx.Init.MemDataAlignment = DMA_MDATAALIGN_HALFWORD;
|
||||
hdma_spi1_tx.Init.Mode = DMA_NORMAL;
|
||||
hdma_spi1_tx.Init.Priority = DMA_PRIORITY_LOW;
|
||||
if (HAL_DMA_Init(&hdma_spi1_tx) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
|
||||
#if 0
|
||||
if (HAL_DMA_ConfigChannelAttributes(&hdma_spi1_tx, DMA_CHANNEL_NPRIV) != HAL_OK)
|
||||
{
|
||||
Error_Handler();
|
||||
}
|
||||
|
||||
#endif
|
||||
__HAL_LINKDMA(spiHandle,hdmatx,hdma_spi1_tx);
|
||||
|
||||
/* SPI1 interrupt Init */
|
||||
|
|
|
|||
|
|
@ -244,6 +244,20 @@ void EXTI1_IRQHandler(void)
|
|||
/* USER CODE END EXTI1_IRQn 1 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles DMA1 Channel 1 Interrupt.
|
||||
*/
|
||||
void DMA1_Channel1_IRQHandler(void)
|
||||
{
|
||||
/* USER CODE BEGIN DMA1_Channel1_IRQn 0 */
|
||||
|
||||
/* USER CODE END DMA1_Channel1_IRQn 0 */
|
||||
HAL_DMA_IRQHandler(&hdma_spi1_tx);
|
||||
/* USER CODE BEGIN DMA1_Channel1_IRQn 1 */
|
||||
|
||||
/* USER CODE END DMA1_Channel1_IRQn 1 */
|
||||
}
|
||||
#if 0
|
||||
/**
|
||||
* @brief This function handles DMA1 Channel 2 Interrupt.
|
||||
*/
|
||||
|
|
@ -266,12 +280,12 @@ void DMA1_Channel3_IRQHandler(void)
|
|||
/* USER CODE BEGIN DMA1_Channel3_IRQn 0 */
|
||||
|
||||
/* USER CODE END DMA1_Channel3_IRQn 0 */
|
||||
HAL_DMA_IRQHandler(&hdma_spi1_tx);
|
||||
//HAL_DMA_IRQHandler(&hdma_spi1_tx);
|
||||
/* USER CODE BEGIN DMA1_Channel3_IRQn 1 */
|
||||
|
||||
/* USER CODE END DMA1_Channel3_IRQn 1 */
|
||||
}
|
||||
|
||||
#endif
|
||||
/**
|
||||
* @brief This function handles DMA1 Channel 5 Interrupt.
|
||||
*/
|
||||
|
|
|
|||
|
|
@ -114,15 +114,15 @@ static void drawLegend(void) {
|
|||
for (ii = minTemp; ii < maxTemp; ii += inc) {
|
||||
BSP_LCD_DrawVLine(8+ + j++, 292, 20, TempToColor(ii));
|
||||
}
|
||||
|
||||
|
||||
BSP_LCD_SetFont(&Font16);
|
||||
memset(tempBuffer,0,sizeof(tempBuffer));
|
||||
sprintf(tempBuffer,(char *)"%2.1f",minTemp);
|
||||
BSP_LCD_DisplayStringAt(8,290,(uint8_t *)tempBuffer,LEFT_MODE,LCD_COLOR_BLUE);
|
||||
BSP_LCD_DisplayStringAt(8,230,(uint8_t *)tempBuffer,LEFT_MODE,LCD_COLOR_BLUE);
|
||||
|
||||
memset(tempBuffer,0,sizeof(tempBuffer));
|
||||
sprintf(tempBuffer,(char *)"%2.1f",maxTemp);
|
||||
BSP_LCD_DisplayStringAt(190,290,(uint8_t *)tempBuffer,LEFT_MODE,LCD_COLOR_RED);
|
||||
BSP_LCD_DisplayStringAt(190,230,(uint8_t *)tempBuffer,LEFT_MODE,LCD_COLOR_RED);
|
||||
|
||||
}
|
||||
|
||||
|
|
@ -134,17 +134,17 @@ static void drawMeasurement(void ) {
|
|||
|
||||
// Measure and print center temperature
|
||||
centerTemp = (tempValues[383 - 16] + tempValues[383 - 15] + tempValues[384 + 15] + tempValues[384 + 16]) / 4;
|
||||
|
||||
BSP_LCD_SetFont(&Font16);
|
||||
|
||||
BSP_LCD_SetFont(&Font16);
|
||||
memset(tempBuffer,0,sizeof(tempBuffer));
|
||||
sprintf(tempBuffer,(char *)"%2.2f ",centerTemp);
|
||||
BSP_LCD_DisplayStringAt(88,220,(uint8_t *)tempBuffer,LEFT_MODE,LCD_COLOR_RED);
|
||||
BSP_LCD_DisplayStringAt(88,230,(uint8_t *)tempBuffer,LEFT_MODE,LCD_COLOR_RED);
|
||||
}
|
||||
|
||||
static void drawPicture(void) {
|
||||
for (y=0; y<24; y++) {
|
||||
for (x=0; x<32; x++) {
|
||||
BSP_LCD_FillRect(8 + x*7, 8 + y*7, 7, 7, TempToColor(tempValues[(31-x) + (y*32)]));
|
||||
BSP_LCD_FillRect(x*10, y*10, 9, 10, TempToColor(tempValues[(x) + (y*32)]));
|
||||
}
|
||||
}
|
||||
}
|
||||
|
|
@ -169,6 +169,7 @@ static void readTempValues(void) {
|
|||
|
||||
MLX90640_CalculateTo(mlx90640Frame, &mlx90640, EMMISIVITY, tr, tempValues);
|
||||
}
|
||||
#if 0
|
||||
APP_LOG(TS_OFF,VLEVEL_L, "\r\n\n\n");
|
||||
for (uint8_t y=0; y < 24; y++) {
|
||||
for (uint8_t x=0; x<32; x++) {
|
||||
|
|
@ -176,10 +177,11 @@ static void readTempValues(void) {
|
|||
}
|
||||
APP_LOG(TS_OFF,VLEVEL_L, "\r\n");
|
||||
}
|
||||
#endif
|
||||
}
|
||||
|
||||
void mlx90640_display_process(void){
|
||||
APP_LOG(TS_OFF, VLEVEL_L, "Read value.\r\n");
|
||||
//APP_LOG(TS_OFF, VLEVEL_L, "Read value.\r\n");
|
||||
readTempValues();
|
||||
setTempScale();
|
||||
drawPicture();
|
||||
|
|
|
|||
|
|
@ -66,8 +66,8 @@ LCD_DrvTypeDef st7789v_drv =
|
|||
//static uint8_t Is_st7789v_Initialized = 0;
|
||||
static uint16_t ArrayRGB[280] = {0};
|
||||
|
||||
uint16_t st7789v_width = 240;
|
||||
uint16_t st7789v_height = 280;
|
||||
uint16_t st7789v_width = ST7789V_LCD_PIXEL_WIDTH;
|
||||
uint16_t st7789v_height = ST7789V_LCD_PIXEL_HEIGHT;
|
||||
uint8_t st7789v_rotation = 0;
|
||||
/**
|
||||
* @}
|
||||
|
|
@ -122,20 +122,19 @@ void st7789v_Init(void)
|
|||
/* Initialize st7789v low level bus layer -----------------------------------*/
|
||||
LCD_IO_Init();
|
||||
|
||||
//LCD_CS_HIGH();
|
||||
|
||||
LCD_RST_LOW();
|
||||
HAL_Delay(10);
|
||||
//LCD_CS_LOW(); //CHIP SELECT
|
||||
LCD_RST_LOW(); // CHIP RESET
|
||||
HAL_Delay(100);
|
||||
LCD_RST_HIGH();
|
||||
HAL_Delay(10);
|
||||
HAL_Delay(100);
|
||||
|
||||
LCD_BL_ON();
|
||||
HAL_Delay(100);
|
||||
/* Out of sleep mode, 0 args, no delay */
|
||||
st7789v_WriteRegCmd(0x11);
|
||||
HAL_Delay(120);
|
||||
st7789v_WriteRegCmd(0x11);
|
||||
HAL_Delay(120);
|
||||
st7789v_WriteRegCmd(0x36);
|
||||
|
||||
st7789v_WriteRegCmd(0x36);
|
||||
if (st7789v_rotation ==0) st7789v_WriteRegCmd(0x00);
|
||||
else if (st7789v_rotation ==1) st7789v_WriteRegCmd(0xC0);
|
||||
if (st7789v_rotation ==2) st7789v_WriteRegCmd(0x70);
|
||||
|
|
@ -192,7 +191,8 @@ void st7789v_Init(void)
|
|||
st7789v_WriteReg(0xE1, 0x0E);
|
||||
st7789v_WriteReg(0xE1, 0x09);
|
||||
st7789v_WriteReg(0xE1, 0x09);
|
||||
st7789v_WriteReg(0xE1, 0x05);
|
||||
st7789v_WriteReg(0xE1, 0x15);
|
||||
st7789v_WriteReg(0xE1, 0x31);
|
||||
st7789v_WriteReg(0xE1, 0x33);
|
||||
st7789v_WriteReg(0xE1, 0x48);
|
||||
st7789v_WriteReg(0xE1, 0x17);
|
||||
|
|
@ -254,9 +254,9 @@ void st7789v_SetCursor(uint16_t Xpos, uint16_t Ypos)
|
|||
data = (Xpos) & 0xFF;
|
||||
LCD_IO_WriteMultipleData(&data, 1);
|
||||
LCD_IO_WriteReg(0x2B);/* Row address set: RASET */
|
||||
data = (Ypos) >> 8;
|
||||
data = (Ypos+20) >> 8;
|
||||
LCD_IO_WriteMultipleData(&data, 1);
|
||||
data = (Ypos) & 0xFF;
|
||||
data = (Ypos+20) & 0xFF;
|
||||
LCD_IO_WriteMultipleData(&data, 1);
|
||||
LCD_IO_WriteReg(0x2C);/* Memory write: RAMWR */
|
||||
}
|
||||
|
|
@ -271,10 +271,10 @@ void st7789v_SetCursor(uint16_t Xpos, uint16_t Ypos)
|
|||
void st7789v_WritePixel(uint16_t Xpos, uint16_t Ypos, uint16_t RGBCode)
|
||||
{
|
||||
uint8_t data = 0;
|
||||
// if((Xpos > ST7789V_LCD_PIXEL_WIDTH) || (Ypos > ST7789V_LCD_PIXEL_HEIGHT))
|
||||
// {
|
||||
// return;
|
||||
// }
|
||||
if((Xpos > ST7789V_LCD_PIXEL_WIDTH) || (Ypos > ST7789V_LCD_PIXEL_HEIGHT))
|
||||
{
|
||||
return;
|
||||
}
|
||||
|
||||
/* Set Cursor */
|
||||
st7789v_SetCursor(Xpos, Ypos);
|
||||
|
|
@ -484,7 +484,7 @@ void st7789_SetRotation(uint8_t rotation)
|
|||
case 0:
|
||||
/* Memory access control: MY = 0, MX = 0, MV = 0, ML = 0 */
|
||||
/* */
|
||||
#if 0
|
||||
#if 1
|
||||
st7789v_WriteReg(0X36, 0x08);
|
||||
st7789v_WriteReg(0x2A, 0x00);
|
||||
st7789v_WriteReg(0x2A, 0x00);
|
||||
|
|
@ -500,7 +500,7 @@ void st7789_SetRotation(uint8_t rotation)
|
|||
break;
|
||||
case 1:
|
||||
/* Memory access control: MY = 0, MX = 1, MV = 1, ML = 0 */
|
||||
#if 0
|
||||
#if 1
|
||||
st7789v_WriteReg(0X36, 0x68);
|
||||
st7789v_WriteReg(0x2A, 0x00);
|
||||
st7789v_WriteReg(0x2A, 0x00);
|
||||
|
|
|
|||
|
|
@ -146,25 +146,43 @@ uint8_t BSP_LCD_Init(void)
|
|||
uint8_t ret = LCD_ERROR;
|
||||
|
||||
/* Default value for draw propriety */
|
||||
#if 1
|
||||
DrawProp.BackColor = 0xFFFF;
|
||||
DrawProp.pFont = &Font16;
|
||||
DrawProp.TextColor = 0x0000;
|
||||
|
||||
#endif
|
||||
// lcd_drv = &hx8347d_drv;
|
||||
lcd_drv = &st7789v_drv;
|
||||
|
||||
LCD_IO_Init();
|
||||
//LCD_IO_Init();
|
||||
/* LCD Init */
|
||||
lcd_drv->Init();
|
||||
|
||||
BSP_LCD_SetRotation(0);
|
||||
LCD_BL_ON();
|
||||
lcd_drv->SetRotation(1);
|
||||
#if 0
|
||||
/* Clear the LCD screen */
|
||||
BSP_LCD_Clear(LCD_COLOR_WHITE);
|
||||
|
||||
HAL_Delay(1000);
|
||||
LCD_BL_OFF();
|
||||
/* Initialize the font */
|
||||
BSP_LCD_SetFont(&LCD_DEFAULT_FONT);
|
||||
|
||||
|
||||
BSP_LCD_SetRotation(1);
|
||||
LCD_BL_ON();
|
||||
BSP_LCD_Clear(LCD_COLOR_BLUE);
|
||||
HAL_Delay(1000);
|
||||
LCD_BL_OFF();
|
||||
|
||||
BSP_LCD_SetRotation(2);
|
||||
LCD_BL_ON();
|
||||
BSP_LCD_Clear(LCD_COLOR_GREEN);
|
||||
HAL_Delay(1000);
|
||||
LCD_BL_OFF();
|
||||
|
||||
/* Clear the LCD screen */
|
||||
BSP_LCD_Clear(LCD_COLOR_WHITE);
|
||||
|
||||
|
||||
#endif
|
||||
ret = LCD_OK;
|
||||
|
||||
return ret;
|
||||
|
|
@ -692,7 +710,7 @@ void BSP_LCD_FillRect(uint16_t Xpos, uint16_t Ypos, uint16_t Width, uint16_t Hei
|
|||
lcd_drv->FillRect(Xpos, Ypos, Width, Height, RGBCode);
|
||||
}
|
||||
|
||||
SetDisplayWindow(0, 0, BSP_LCD_GetYSize(), BSP_LCD_GetXSize());
|
||||
SetDisplayWindow(0, 0, BSP_LCD_GetXSize(), BSP_LCD_GetYSize());
|
||||
}
|
||||
|
||||
/**
|
||||
|
|
@ -1187,15 +1205,20 @@ void LCD_IO_Init(void)
|
|||
/* Configure LCD_CS_PIN pin: LCD CS pin */
|
||||
gpioinitstruct.Pin = LCD_CS_PIN;
|
||||
gpioinitstruct.Mode = GPIO_MODE_OUTPUT_PP;
|
||||
gpioinitstruct.Speed = GPIO_SPEED_FREQ_HIGH;
|
||||
gpioinitstruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
||||
HAL_GPIO_Init(LCD_CS_GPIO_Port, &gpioinitstruct);
|
||||
|
||||
/* Configure LCD_DC_PIN pin: LCD Card DC pin */
|
||||
gpioinitstruct.Pin = LCD_DC_PIN;
|
||||
HAL_GPIO_Init(LCD_DC_GPIO_PORT, &gpioinitstruct);
|
||||
|
||||
gpioinitstruct.Pin = LCD_RST_PIN;
|
||||
HAL_GPIO_Init(LCD_RST_GPIO_PORT, &gpioinitstruct);
|
||||
|
||||
/* LCD chip select high */
|
||||
LCD_CS_HIGH();
|
||||
LCD_DC_HIGH();
|
||||
LCD_RST_HIGH();
|
||||
|
||||
/* LCD SPI Config */
|
||||
//SPIx_Init();
|
||||
|
|
@ -1212,13 +1235,16 @@ void LCD_IO_WriteReg(uint8_t LCDReg)
|
|||
LCD_CS_LOW();
|
||||
|
||||
/* Set LCD data/command line DC to Low */
|
||||
//LCD_DC_LOW();
|
||||
LCD_DC_LOW();
|
||||
|
||||
/* Send Command */
|
||||
SPIx_Write(LCDReg);
|
||||
HAL_Delay(1);
|
||||
|
||||
LCD_DC_HIGH();
|
||||
/* Deselect : Chip Select high */
|
||||
LCD_CS_HIGH();
|
||||
|
||||
}
|
||||
|
||||
/**
|
||||
|
|
@ -1312,37 +1338,37 @@ void LCD_Delay(uint32_t Delay)
|
|||
void BSP_LCD_Test(void)
|
||||
{
|
||||
BSP_LCD_Clear(LCD_COLOR_WHITE);
|
||||
HAL_Delay(1000);
|
||||
HAL_Delay(500);
|
||||
APP_LOG(TS_OFF,VLEVEL_L,"\r\n Clear with red...........\r\n");
|
||||
BSP_LCD_Clear(LCD_COLOR_RED);
|
||||
|
||||
HAL_Delay(1000);
|
||||
HAL_Delay(500);
|
||||
BSP_LCD_Clear(LCD_COLOR_RED);
|
||||
APP_LOG(TS_OFF,VLEVEL_L,"\r\n Clear with blue...........\r\n");
|
||||
BSP_LCD_Clear(LCD_COLOR_BLUE);
|
||||
HAL_Delay(1000);
|
||||
HAL_Delay(500);
|
||||
|
||||
APP_LOG(TS_OFF,VLEVEL_L,"\r\n Clear with YELLOW...........\r\n");
|
||||
BSP_LCD_Clear(LCD_COLOR_YELLOW);
|
||||
HAL_Delay(1000);
|
||||
HAL_Delay(500);
|
||||
APP_LOG(TS_OFF,VLEVEL_L,"\r\n Clear with GREEN...........\r\n");
|
||||
BSP_LCD_Clear(LCD_COLOR_GREEN);
|
||||
HAL_Delay(1000);
|
||||
HAL_Delay(500);
|
||||
APP_LOG(TS_OFF,VLEVEL_L,"\r\n Clear with WHITE...........\r\n");
|
||||
BSP_LCD_Clear(LCD_COLOR_WHITE);
|
||||
HAL_Delay(1000);
|
||||
HAL_Delay(500);
|
||||
|
||||
BSP_LCD_FillRect(0,0,ST7789V_LCD_PIXEL_WIDTH,ST7789V_LCD_PIXEL_HEIGHT,LCD_COLOR_WHITE);
|
||||
HAL_Delay(1000);
|
||||
HAL_Delay(500);
|
||||
BSP_LCD_FillRect(0,0,ST7789V_LCD_PIXEL_WIDTH,ST7789V_LCD_PIXEL_HEIGHT,LCD_COLOR_RED);
|
||||
HAL_Delay(1000);
|
||||
HAL_Delay(500);
|
||||
|
||||
BSP_LCD_FillRect(0,0,ST7789V_LCD_PIXEL_WIDTH,ST7789V_LCD_PIXEL_HEIGHT,LCD_COLOR_BROWN);
|
||||
HAL_Delay(1000);
|
||||
HAL_Delay(500);
|
||||
BSP_LCD_FillRect(0,0,ST7789V_LCD_PIXEL_WIDTH,ST7789V_LCD_PIXEL_HEIGHT,LCD_COLOR_LIGHTGREEN);
|
||||
HAL_Delay(1000);
|
||||
HAL_Delay(500);
|
||||
BSP_LCD_FillRect(0,0,ST7789V_LCD_PIXEL_WIDTH,ST7789V_LCD_PIXEL_HEIGHT,LCD_COLOR_LGRAYBLUE);
|
||||
HAL_Delay(1000);
|
||||
HAL_Delay(500);
|
||||
BSP_LCD_FillRect(0,0,ST7789V_LCD_PIXEL_WIDTH,ST7789V_LCD_PIXEL_HEIGHT,LCD_COLOR_BLUE);
|
||||
|
||||
#if 0
|
||||
|
|
@ -1398,7 +1424,7 @@ void BSP_LCD_Test(void)
|
|||
|
||||
BSP_LCD_Clear(LCD_COLOR_BLACK);
|
||||
//BSP_LCD_DrawBitmap(0, 0, (char *)gImage_1);
|
||||
HAL_Delay(3000);
|
||||
HAL_Delay(500);
|
||||
|
||||
/*
|
||||
|
||||
|
|
|
|||
Loading…
Reference in New Issue