STS_M1A/Core/Inc/sts_lamp_bar.h

101 lines
3.0 KiB
C
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/* USER CODE BEGIN Header */
/**
******************************************************************************
* @file : sts_lamp_bar.h
* @brief : Header for sts_lamp_bar.c file.
* This file contains the common defines of the application.
******************************************************************************
* @attention
*
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* USER CODE END Header */
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STS_LAMP_BAR_H
#define __STS_LAMP_BAR_H
#ifdef __cplusplus
extern "C" {
#endif
#include "main.h"
/* HSV value of STS_COLOR */
#define HSV_DARK 0
#define HSV_RED 0
#define HSV_YELLOW 60
#define HSV_GREEN 120
#define HSV_CYAN 180
#define HSV_BLUE 240
#define HSV_PINK 125
#define HSV_WHITE 360
#define HSV_RED_BLUE 0
#define DEFAULT_SATURATION 50 // 0 - 100 SSaturation, 0~100
#define DEFAULT_BRIGHTNESS 50 // 0 - 100 VValue of lightness, 0~100
enum sts_lamp_color {
STS_DARK = 0, //灭0
STS_GREEN, //绿1 0 1 0
STS_RED, //红2 1 0 0
STS_BLUE, //蓝3 0 0 1
STS_YELLOW, //黄4 1 1 0
STS_PINK, //紫5 1 0 1
STS_CYAN, //青6 0 1 1
STS_WHITE, //白7 1 1 1
STS_RED_BLUE //红蓝闪烁8
};
enum sts_oo_work_mode {
STS_NETWORK_MODE = 0,
STS_WIRED_MODE, // 1
STS_REEDSWITCH_MODE, // 2 REED SWITCH ONLY
STS_RSS_MODE, // 3 RSS ONLY
STS_DUAL_MODE, // 4 RSS + REED SWITCH
STS_REEDSWITCH, // 5 REED SWITCH ?????
STS_DUAL_RSS_MODE, // 6
STS_TOF_MODE, // 7 TOF OCCUPANCY
STS_TOF_RSS_MODE // 8 TOF + RSS
};
#define STS_Reed_Hall_Status HAL_GPIO_ReadPin(BUT1_GPIO_Port, BUT1_Pin)
//void STS_Lamp_Bar_All(uint8_t lamp_color, uint8_t luminance_level);
void STS_Lamp_Bar_Set_Color(uint8_t red, uint8_t green, uint8_t blue );
void STS_Lamp_Bar_Set_RGB(uint8_t red, uint8_t green, uint8_t blue);
void STS_Lamp_Bar_Set_HSV(uint16_t H, uint16_t S, uint16_t V, uint16_t num);
void STS_Lamp_Bar_Init(void);
void STS_Lamp_Bar_Full_Color_Gradient(void);
void STS_WS2812B_Refresh(void);
void STS_Reed_Hall_Working(void);
void STS_Lamp_Bar_Self_Test(void);
void STS_Lamp_Bar_Set_Dark(void);
// Before Join LoRa-WAN Network
void STS_Lamp_Bar_Scoller(uint8_t color, uint8_t luminance_level);
// Occupancy Status, Set Color to STS_RED
// Vacant Status, Set Color to STS_GREEN
void STS_Lamp_Bar_Set_STS_RGB_Color(uint8_t sts_lamp_color, uint8_t luminance_level);
// Occupancy Status, Set Color to HSV_RED
// Vacant Status, Set Color to HSV_GREEN
void STS_Lamp_Bar_Set_STS_HSV_Color(uint8_t sts_lamp_color, uint8_t sts_lamp_hsv_value);
void STS_YunhornSTSEventP1_Process(void);
void STS_YunhornSTSEventP2_Process(void);
void STS_YunhornSTSEventP3_Process(void);
#ifdef __cplusplus
}
#endif
#endif /* _STS_LAMP_BAR_H */