/* USER CODE BEGIN Header */
/**
******************************************************************************
* @file: main.h *
* @author Yunhorn (r) Technology Limited Application Team *
* @brief Yunhorn (r) SmarToilets (r) Product configuration file. *
******************************************************************************
* @attention
*
* Copyright (c) 2023 Yunhorn Technology Limited.
* Copyright (c) 2023 Shenzhen Yunhorn Technology Co., Ltd.
* All rights reserved.
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* USER CODE END Header */
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __MAIN_H
#define __MAIN_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32wlxx_hal.h"
/* Private includes ----------------------------------------------------------*/
/* USER CODE BEGIN Includes */
#include "yunhorn_sts_prd_conf.h"
#include "stm32wlxx_nucleo.h"
/* USER CODE END Includes */
/* Exported types ------------------------------------------------------------*/
/* USER CODE BEGIN ET */
/* USER CODE END ET */
/* Exported constants --------------------------------------------------------*/
/* USER CODE BEGIN EC */
/* USER CODE END EC */
/* Exported macro ------------------------------------------------------------*/
/* USER CODE BEGIN EM */
/* USER CODE END EM */
/* Exported functions prototypes ---------------------------------------------*/
void Error_Handler(void);
/* USER CODE BEGIN EFP */
void MX_I2C2_Init(void);
void MX_DMA_Init(void);
void MX_TOF_Init(void);
/* USER CODE END EFP */
/* Private defines -----------------------------------------------------------*/
#define RTC_N_PREDIV_S 10
#define RTC_PREDIV_S ((1<<RTC_N_PREDIV_S)-1)
#define RTC_PREDIV_A ((1<<(15-RTC_N_PREDIV_S))-1)
#if defined(STM32WL55xx)
#define LED1_Pin GPIO_PIN_15
#define LED1_GPIO_Port GPIOB
#define LED2_Pin GPIO_PIN_9
#define LED2_GPIO_Port GPIOB
#define LED3_Pin GPIO_PIN_11
#define LED3_GPIO_Port GPIOB
#define BSP_BUTTON_EXTI_IRQn EXTI0_IRQn
#define PROB2_Pin GPIO_PIN_13
#define PROB2_GPIO_Port GPIOB
#define PROB1_Pin GPIO_PIN_12
#define PROB1_GPIO_Port GPIOB
#endif
#if defined(STM32WLE5xx)
#define LED1_Pin GPIO_PIN_2
#define LED1_GPIO_Port GPIOB
#define LED_ON HAL_GPIO_WritePin(LED1_GPIO_Port, LED1_Pin, GPIO_PIN_SET )
#define LED_OFF HAL_GPIO_WritePin(LED1_GPIO_Port, LED1_Pin, GPIO_PIN_RESET )
#define BSP_BUTTON_EXTI_IRQn EXTI0_IRQn
#define LED2_Pin LED1_Pin
#define LED2_GPIO_Port LED1_GPIO_Port
#define LED3_Pin LED1_Pin
#define LED3_GPIO_Port LED1_GPIO_Port
#endif
#define BUT1_Pin GPIO_PIN_0
#define BUT1_GPIO_Port GPIOA
#define BUT1_EXTI_IRQn EXTI0_IRQn
#define BUT2_Pin GPIO_PIN_1
#define BUT2_GPIO_Port GPIOA
#define BUT2_EXTI_IRQn EXTI1_IRQn
#if defined(STM32WL55xx)
#define BUT3_Pin GPIO_PIN_6
#define BUT3_GPIO_Port GPIOC
#define BUT3_EXTI_IRQn EXTI9_5_IRQn
#endif
#define USARTx_RX_Pin GPIO_PIN_3
#define USARTx_RX_GPIO_Port GPIOA
#define USARTx_TX_Pin GPIO_PIN_2
#define USARTx_TX_GPIO_Port GPIOA
#ifdef STS_O5 // STS_O5 GPIO PORT PIN DEFINATION
/* --------------------------------------------------*/
/* | HALL-2 (PA-10) VCC-GPIO-PB-4 | */
/* | | */
/* | HALL-1 (PA-0) VCC-GPIO-PB3 | */
/* | | */
/* |------------------------------------------------ */
#define HALL1_Pin GPIO_PIN_0
#define HALL1_GPIO_Port GPIOA
#define HALL1_EXTI_IRQn EXTI0_IRQn
#define HALL2_Pin GPIO_PIN_10
#define HALL2_GPIO_Port GPIOA
#define HALL2_EXTI_IRQn EXTI15_10_IRQn
#define HALL1_STATE HAL_GPIO_ReadPin(HALL1_GPIO_Port, HALL1_Pin)
#define HALL2_STATE HAL_GPIO_ReadPin(HALL2_GPIO_Port, HALL2_Pin)
#define HALL1_VCC_Pin GPIO_PIN_3
#define HALL1_VCC_GPIO_Port GPIOB
#define HALL2_VCC_Pin GPIO_PIN_4
#define HALL2_VCC_GPIO_Port GPIOB
#endif // STS_O5 GPIO PORT PIN DEFINATION
#define MEMS_POWER_Pin GPIO_PIN_4 // PMU_ENABLE
#define MEMS_POWER_GPIO_Port GPIOB // PMU_ENABLE
#define MEMS_RESET_Pin GPIO_PIN_4
#define MEMS_RESET_GPIO_Port GPIOB
#define PME_ON HAL_GPIO_WritePin(MEMS_RESET_GPIO_Port, MEMS_POWER_Pin, GPIO_PIN_SET )
#define PME_OFF HAL_GPIO_WritePin(MEMS_RESET_GPIO_Port, MEMS_POWER_Pin, GPIO_PIN_RESET )
#define TOF250_I2C_ADDR (0x52<<1)
#if defined(STM32WLE5xx) || defined(STM32WL55xx)
#define I2C2_SCL_PIN GPIO_PIN_12
#define I2C2_SDA_PIN GPIO_PIN_11
#define I2C2_SCL_PORT GPIOA
#define I2C2_SDA_PORT GPIOA
#endif
/* USER CODE BEGIN Private defines */
/* -------------------- | -------------------- */
/* | | | */
/* | TOF-2 | TOF-1 | */
/* -------------------- | ------------------ | */
/* U4, PA-9 | U3, PB-5 | */
/* TOF_1, U3 RIGHT CORNER, PB-5 */
#if defined(TOF_1) //&& defined(STM32WLE5xx)
#define TOF_C_INT_Pin GPIO_PIN_3 // 2024-04-08 WAS GPIO_PIN_5
#define TOF_C_INT_GPIO_Port GPIOB
#define TOF_C_INT_EXTI_IRQn EXTI3_IRQn // 2024-04-08 WAS EXTI9_5_IRQn
#define TOF_C_XSHUT_Pin GPIO_PIN_5 // 2024-04-08 WAS GPIO_PIN_3
#define TOF_C_XSHUT_GPIO_Port GPIOB
#endif
// Common Shared Int Pin and Port for VL53L0X
#define TOF_INT_EXTI_PIN GPIO_PIN_3 // 2024-04-08 WAS GPIO_PIN_5 //TOF_C_INT_Pin
#define TOF_INT_EXTI_PORT GPIOB // TOF_C_INT_GPIO_Port
/* TOF_2, */
#if defined(TOF_2) && defined(STM32WL55xx)
#define TOF_L_INT_Pin GPIO_PIN_7
#define TOF_L_INT_GPIO_Port GPIOC
#define TOF_L_INT_EXTI_IRQn EXTI9_5_IRQn
#define TOF_L_XSHUT_Pin GPIO_PIN_10
#define TOF_L_XSHUT_GPIO_Port GPIOB
#endif
/* TOF_2, U4 LEFT CORNER, PA-9 */
#if defined(TOF_2) && defined(STM32WLE5xx)
#define TOF_L_INT_Pin GPIO_PIN_3 // 2024-04-08 WAS GPIO_PIN_5
#define TOF_L_INT_GPIO_Port GPIOB
#define TOF_L_INT_EXTI_IRQn EXTI3_IRQn // 2024-04-08 WAS EXTI9_5_IRQn
#define TOF_L_XSHUT_Pin GPIO_PIN_9
#define TOF_L_XSHUT_GPIO_Port GPIOA
#endif
/* TOF_3 */
#if defined(STM32WL55xx) && defined(TOF_3)
#define TOF_R_INT_Pin GPIO_PIN_10
#define TOF_R_INT_GPIO_Port GPIOA
#define TOF_R_INT_EXTI_IRQn EXTI15_10_IRQn
#define TOF_R_XSHUT_Pin GPIO_PIN_5
#define TOF_R_XSHUT_GPIO_Port GPIOB
#endif
/* TOF_3 */
#if defined(STM32WLE5xx) && defined(TOF_3)
#define TOF_R_INT_Pin GPIO_PIN_3 // 2024-04-08 WAS GPIO_PIN_5
#define TOF_R_INT_GPIO_Port GPIOB
#define TOF_R_INT_EXTI_IRQn EXTI3_IRQn // 2024-04-08 WAS EXTI9_5_IRQn
#define TOF_R_XSHUT_Pin GPIO_PIN_10
#define TOF_R_XSHUT_GPIO_Port GPIOA
#endif
#if defined(SOAP_LEVEL_SENSOR)
/* IF_SOAP_IN, MEMS_IF_3, PA10 */
#define SOAP_STATUS_Pin GPIO_PIN_10
#define SOAP_STATUS_GPIO_Port GPIOA
/* IF_SENSOR_ON_OFF, MEMS_IF_1, PB3 */
#define SOAP_SWITCH_Pin GPIO_PIN_5 // 2024-04-08 WAS GPIO_PIN_3
#define SOAP_SWITCH_GPIO_Port GPIOB
#define SOAP_DATA HAL_GPIO_ReadPin(SOAP_STATUS_GPIO_Port, SOAP_STATUS_Pin)
#endif
#define STS_SERVICE_MASK_L0 (0) // Service normal , no mask off
#define STS_SERVICE_MASK_L1 (1) // service mask level 1, sensing data upload in silence mode, node appearance silence (no LED, No display, no sound, no vibration)
#define STS_SERVICE_MASK_L2 (2) // service mask level 2, NO sensing data upload (event or periodicity)
#define STS_SERVICE_MASK_L3 (3) // service mask level 3, NO responsing to cloud control command, or config change/responding, EXCEPT STS_SERVICE_MASK_ON_OFF cmd
//#define STS_SERVICE_MASK_L4 (1<<4) // service mask level 4, level 3 + node states heart-beat(predefined long periodicity off), EXCEPT STS_SERVICE_MASK_ON_OFF cmd
/* USER CODE END Private defines */
#ifdef __cplusplus
}
#endif
#endif /* __MAIN_H */