revised for low power
This commit is contained in:
parent
0ac291f168
commit
0c0dc4f5f0
|
|
@ -47,9 +47,9 @@ void MX_GPIO_Init(void)
|
|||
GPIO_InitTypeDef GPIO_InitStruct = {0};
|
||||
|
||||
/* GPIO Ports Clock Enable */
|
||||
__HAL_RCC_GPIOA_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOB_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOC_CLK_ENABLE();
|
||||
__HAL_RCC_GPIOA_CLK_ENABLE();
|
||||
|
||||
/*Configure GPIO pin Output Level */
|
||||
#if defined(STM32WL55xx)
|
||||
|
|
@ -179,6 +179,10 @@ HAL_GPIO_Init(SOAP_SWITCH_GPIO_Port, &GPIO_InitStruct);
|
|||
|
||||
HAL_NVIC_SetPriority(EXTI1_IRQn, 0, 0);
|
||||
HAL_NVIC_EnableIRQ(EXTI1_IRQn);
|
||||
|
||||
HAL_NVIC_SetPriority(EXTI9_5_IRQn, 0, 0);
|
||||
HAL_NVIC_EnableIRQ(EXTI9_5_IRQn);
|
||||
|
||||
#if defined(TOF_1)
|
||||
HAL_NVIC_SetPriority(TOF_C_INT_EXTI_IRQn, 0, 0);
|
||||
HAL_NVIC_EnableIRQ(TOF_C_INT_EXTI_IRQn);
|
||||
|
|
|
|||
|
|
@ -225,9 +225,6 @@ void Error_Handler(void)
|
|||
__disable_irq();
|
||||
while (1)
|
||||
{
|
||||
#if defined(STM32WL55xx)
|
||||
HAL_GPIO_TogglePin(LED3_GPIO_Port, LED3_Pin); /* LED_RED */
|
||||
#endif
|
||||
}
|
||||
/* USER CODE END Error_Handler_Debug */
|
||||
}
|
||||
|
|
|
|||
|
|
@ -76,7 +76,7 @@ extern DMA_HandleTypeDef hdma_i2c2_tx;
|
|||
//extern TIM_HandleTypeDef htim2;
|
||||
//extern TIM_HandleTypeDef htim16;
|
||||
extern DMA_HandleTypeDef hdma_usart2_tx;
|
||||
extern DMA_HandleTypeDef hdma_usart2_rx;
|
||||
//extern DMA_HandleTypeDef hdma_usart2_rx;
|
||||
|
||||
|
||||
/* USER CODE BEGIN EV */
|
||||
|
|
@ -242,7 +242,6 @@ void EXTI0_IRQHandler(void)
|
|||
/* USER CODE BEGIN EXTI0_IRQn 0 */
|
||||
|
||||
/* USER CODE END EXTI0_IRQn 0 */
|
||||
//HAL_EXTI_IRQHandler(&H_EXTI_0);
|
||||
HAL_GPIO_EXTI_IRQHandler(BUT1_Pin);
|
||||
/* USER CODE BEGIN EXTI0_IRQn 1 */
|
||||
|
||||
|
|
|
|||
|
|
@ -634,30 +634,12 @@ void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin)
|
|||
switch (GPIO_Pin)
|
||||
{
|
||||
case BUT1_Pin:
|
||||
|
||||
#ifdef YUNHORN_STS_O5_ENABLED
|
||||
|
||||
uint8_t pinstate = STS_Reed_Hall_State;
|
||||
|
||||
|
||||
//UTIL_SEQ_SetTask((1 << CFG_SEQ_Task_LoRaSendOnTxTimerOrButtonEvent), CFG_SEQ_Prio_0);
|
||||
|
||||
/* Note: when "EventType == TX_ON_TIMER" this GPIO is not initialized */
|
||||
if (EventType == TX_ON_EVENT)
|
||||
|
||||
{
|
||||
APP_LOG(TS_OFF, VLEVEL_L, "## BUTTON-1 DETECTED: %2d \r\n", pinstate);
|
||||
APP_LOG(TS_OFF, VLEVEL_L, "## BUTTON-1 DETECTED \r\n");
|
||||
UTIL_SEQ_SetTask((1 << CFG_SEQ_Task_LoRaSendOnTxTimerOrButtonEvent), CFG_SEQ_Prio_0);
|
||||
} else
|
||||
{
|
||||
#ifdef LED_ONBOARD
|
||||
LED_ON;
|
||||
HAL_Delay(20);
|
||||
LED_OFF;
|
||||
#endif
|
||||
}
|
||||
#endif
|
||||
|
||||
|
||||
break;
|
||||
case BUT2_Pin:
|
||||
#if defined(STS_USE_STM32WLE5)
|
||||
|
|
@ -666,10 +648,10 @@ void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin)
|
|||
break;
|
||||
#if defined(STS_USE_STM32WL55)
|
||||
case BUT3_Pin:
|
||||
|
||||
UTIL_SEQ_SetTask((1 << CFG_SEQ_Task_LoRaStoreContextEvent), CFG_SEQ_Prio_0);
|
||||
#endif
|
||||
break;
|
||||
#endif
|
||||
|
||||
#if (defined(STS_USE_TOF_VL53L1X) ||defined(STS_USE_TOF_VL53L0X))
|
||||
case TOF_INT_EXTI_PIN:
|
||||
ToF_EventDetected = 1;
|
||||
|
|
@ -797,14 +779,10 @@ static void SendTxData(void)
|
|||
#endif
|
||||
UTIL_TIMER_Time_t nextTxIn = 0;
|
||||
|
||||
//APP_LOG(TS_ON, VLEVEL_H, "\r\n Flag: Heart-beat-timer = %u \r\n upload_message_timer %u \r\n sensor_data_ready = %u \r\n",
|
||||
//heart_beat_timer, upload_message_timer, sensor_data_ready);
|
||||
|
||||
|
||||
if (LmHandlerIsBusy() == false)
|
||||
{
|
||||
uint8_t i = 0;
|
||||
//MX_TOF_Process();
|
||||
|
||||
#if defined(YUNHORN_STS_O5_ENABLED)
|
||||
STS_O5_SENSOR_Read(&oo_data);
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -71,7 +71,7 @@ extern "C" {
|
|||
/*!
|
||||
* LoRaWAN default class
|
||||
*/
|
||||
#define LORAWAN_DEFAULT_CLASS CLASS_C
|
||||
#define LORAWAN_DEFAULT_CLASS CLASS_A
|
||||
|
||||
/*!
|
||||
* LoRaWAN default confirm state
|
||||
|
|
|
|||
|
|
@ -1,9 +1,9 @@
|
|||
################################################################################
|
||||
# 自动生成的文件。不要编辑！
|
||||
# Automatically-generated file. Do not edit!
|
||||
# Toolchain: GNU Tools for STM32 (11.3.rel1)
|
||||
################################################################################
|
||||
|
||||
# 将这些工具调用的输入和输出添加到构建变量
|
||||
# Add inputs and outputs from these tool invocations to the build variables
|
||||
C_SRCS += \
|
||||
D:/ONEDRIVE/STM32WLV13/Projects/NUCLEO-WL55JC/Applications/LoRaWAN/STS_RR_R125/Core/Src/adc.c \
|
||||
D:/ONEDRIVE/STM32WLV13/Projects/NUCLEO-WL55JC/Applications/LoRaWAN/STS_RR_R125/Core/Src/adc_if.c \
|
||||
|
|
@ -80,7 +80,7 @@ C_DEPS += \
|
|||
./Application/User/Core/yunhorn_sts_process.d
|
||||
|
||||
|
||||
# 每个子目录必须为构建它所贡献的源提供规则
|
||||
# Each subdirectory must supply rules for building sources it contributes
|
||||
Application/User/Core/adc.o: D:/ONEDRIVE/STM32WLV13/Projects/NUCLEO-WL55JC/Applications/LoRaWAN/STS_RR_R125/Core/Src/adc.c Application/User/Core/subdir.mk
|
||||
arm-none-eabi-gcc "$<" -mcpu=cortex-m4 -std=gnu11 -DCORE_CM4 -DYUNHORN_STS_RANDOM -DSTS_O5 -DSTM32WLE5xx -DUSE_HAL_DRIVER -c -I../../Core/Inc -I../../vl53l0x -I../../TOF/App -I../../TOF/Target -I../../LoRaWAN/App -I../../LoRaWAN/Target -I../../../../../../../Drivers/STM32WLxx_HAL_Driver/Inc -I../../../../../../../Drivers/STM32WLxx_HAL_Driver/Inc/Legacy -I../../../../../../../Utilities/trace/adv_trace -I../../../../../../../Utilities/misc -I../../../../../../../Utilities/sequencer -I../../../../../../../Utilities/timer -I../../../../../../../Utilities/lpm/tiny_lpm -I../../../../../../../Middlewares/Third_Party/LoRaWAN/LmHandler/Packages -I../../../../../../../Drivers/CMSIS/Device/ST/STM32WLxx/Include -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Crypto -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Mac/Region -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Mac -I../../../../../../../Middlewares/Third_Party/LoRaWAN/LmHandler -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Utilities -I../../../../../../../Middlewares/Third_Party/SubGHz_Phy -I../../../../../../../Middlewares/ST/STM32_Cryptographic/include -I../../../../../../../Middlewares/Third_Party/SubGHz_Phy/stm32_radio_driver -I../../../../../../../Drivers/CMSIS/Include -I../../../../../../../Drivers/BSP/STM32WLxx_Nucleo -Os -ffunction-sections -fdata-sections -Wall -fstack-usage -fcyclomatic-complexity -MMD -MP -MF"$(@:%.o=%.d)" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@"
|
||||
Application/User/Core/adc_if.o: D:/ONEDRIVE/STM32WLV13/Projects/NUCLEO-WL55JC/Applications/LoRaWAN/STS_RR_R125/Core/Src/adc_if.c Application/User/Core/subdir.mk
|
||||
|
|
|
|||
|
|
@ -1,9 +1,9 @@
|
|||
################################################################################
|
||||
# 自动生成的文件。不要编辑！
|
||||
# Automatically-generated file. Do not edit!
|
||||
# Toolchain: GNU Tools for STM32 (11.3.rel1)
|
||||
################################################################################
|
||||
|
||||
# 将这些工具调用的输入和输出添加到构建变量
|
||||
# Add inputs and outputs from these tool invocations to the build variables
|
||||
C_SRCS += \
|
||||
D:/ONEDRIVE/STM32WLV13/Projects/NUCLEO-WL55JC/Applications/LoRaWAN/STS_RR_R125/LoRaWAN/App/CayenneLpp.c \
|
||||
D:/ONEDRIVE/STM32WLV13/Projects/NUCLEO-WL55JC/Applications/LoRaWAN/STS_RR_R125/LoRaWAN/App/app_lorawan.c \
|
||||
|
|
@ -23,7 +23,7 @@ C_DEPS += \
|
|||
./Application/User/LoRaWAN/App/lora_info.d
|
||||
|
||||
|
||||
# 每个子目录必须为构建它所贡献的源提供规则
|
||||
# Each subdirectory must supply rules for building sources it contributes
|
||||
Application/User/LoRaWAN/App/CayenneLpp.o: D:/ONEDRIVE/STM32WLV13/Projects/NUCLEO-WL55JC/Applications/LoRaWAN/STS_RR_R125/LoRaWAN/App/CayenneLpp.c Application/User/LoRaWAN/App/subdir.mk
|
||||
arm-none-eabi-gcc "$<" -mcpu=cortex-m4 -std=gnu11 -DCORE_CM4 -DYUNHORN_STS_RANDOM -DSTS_O5 -DSTM32WLE5xx -DUSE_HAL_DRIVER -c -I../../Core/Inc -I../../vl53l0x -I../../TOF/App -I../../TOF/Target -I../../LoRaWAN/App -I../../LoRaWAN/Target -I../../../../../../../Drivers/STM32WLxx_HAL_Driver/Inc -I../../../../../../../Drivers/STM32WLxx_HAL_Driver/Inc/Legacy -I../../../../../../../Utilities/trace/adv_trace -I../../../../../../../Utilities/misc -I../../../../../../../Utilities/sequencer -I../../../../../../../Utilities/timer -I../../../../../../../Utilities/lpm/tiny_lpm -I../../../../../../../Middlewares/Third_Party/LoRaWAN/LmHandler/Packages -I../../../../../../../Drivers/CMSIS/Device/ST/STM32WLxx/Include -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Crypto -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Mac/Region -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Mac -I../../../../../../../Middlewares/Third_Party/LoRaWAN/LmHandler -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Utilities -I../../../../../../../Middlewares/Third_Party/SubGHz_Phy -I../../../../../../../Middlewares/ST/STM32_Cryptographic/include -I../../../../../../../Middlewares/Third_Party/SubGHz_Phy/stm32_radio_driver -I../../../../../../../Drivers/CMSIS/Include -I../../../../../../../Drivers/BSP/STM32WLxx_Nucleo -Os -ffunction-sections -fdata-sections -Wall -fstack-usage -fcyclomatic-complexity -MMD -MP -MF"$(@:%.o=%.d)" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@"
|
||||
Application/User/LoRaWAN/App/app_lorawan.o: D:/ONEDRIVE/STM32WLV13/Projects/NUCLEO-WL55JC/Applications/LoRaWAN/STS_RR_R125/LoRaWAN/App/app_lorawan.c Application/User/LoRaWAN/App/subdir.mk
|
||||
|
|
|
|||
|
|
@ -1,9 +1,9 @@
|
|||
################################################################################
|
||||
# 自动生成的文件。不要编辑！
|
||||
# Automatically-generated file. Do not edit!
|
||||
# Toolchain: GNU Tools for STM32 (11.3.rel1)
|
||||
################################################################################
|
||||
|
||||
# 将这些工具调用的输入和输出添加到构建变量
|
||||
# Add inputs and outputs from these tool invocations to the build variables
|
||||
C_SRCS += \
|
||||
D:/ONEDRIVE/STM32WLV13/Projects/NUCLEO-WL55JC/Applications/LoRaWAN/STS_RR_R125/LoRaWAN/Target/radio_board_if.c
|
||||
|
||||
|
|
@ -14,7 +14,7 @@ C_DEPS += \
|
|||
./Application/User/LoRaWAN/Target/radio_board_if.d
|
||||
|
||||
|
||||
# 每个子目录必须为构建它所贡献的源提供规则
|
||||
# Each subdirectory must supply rules for building sources it contributes
|
||||
Application/User/LoRaWAN/Target/radio_board_if.o: D:/ONEDRIVE/STM32WLV13/Projects/NUCLEO-WL55JC/Applications/LoRaWAN/STS_RR_R125/LoRaWAN/Target/radio_board_if.c Application/User/LoRaWAN/Target/subdir.mk
|
||||
arm-none-eabi-gcc "$<" -mcpu=cortex-m4 -std=gnu11 -DCORE_CM4 -DYUNHORN_STS_RANDOM -DSTS_O5 -DSTM32WLE5xx -DUSE_HAL_DRIVER -c -I../../Core/Inc -I../../vl53l0x -I../../TOF/App -I../../TOF/Target -I../../LoRaWAN/App -I../../LoRaWAN/Target -I../../../../../../../Drivers/STM32WLxx_HAL_Driver/Inc -I../../../../../../../Drivers/STM32WLxx_HAL_Driver/Inc/Legacy -I../../../../../../../Utilities/trace/adv_trace -I../../../../../../../Utilities/misc -I../../../../../../../Utilities/sequencer -I../../../../../../../Utilities/timer -I../../../../../../../Utilities/lpm/tiny_lpm -I../../../../../../../Middlewares/Third_Party/LoRaWAN/LmHandler/Packages -I../../../../../../../Drivers/CMSIS/Device/ST/STM32WLxx/Include -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Crypto -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Mac/Region -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Mac -I../../../../../../../Middlewares/Third_Party/LoRaWAN/LmHandler -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Utilities -I../../../../../../../Middlewares/Third_Party/SubGHz_Phy -I../../../../../../../Middlewares/ST/STM32_Cryptographic/include -I../../../../../../../Middlewares/Third_Party/SubGHz_Phy/stm32_radio_driver -I../../../../../../../Drivers/CMSIS/Include -I../../../../../../../Drivers/BSP/STM32WLxx_Nucleo -Os -ffunction-sections -fdata-sections -Wall -fstack-usage -fcyclomatic-complexity -MMD -MP -MF"$(@:%.o=%.d)" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@"
|
||||
|
||||
|
|
|
|||
|
|
@ -1,9 +1,9 @@
|
|||
################################################################################
|
||||
# 自动生成的文件。不要编辑！
|
||||
# Automatically-generated file. Do not edit!
|
||||
# Toolchain: GNU Tools for STM32 (11.3.rel1)
|
||||
################################################################################
|
||||
|
||||
# 将这些工具调用的输入和输出添加到构建变量
|
||||
# Add inputs and outputs from these tool invocations to the build variables
|
||||
S_SRCS += \
|
||||
../Application/User/Startup/startup_stm32wle5ccux.s
|
||||
|
||||
|
|
@ -14,7 +14,7 @@ S_DEPS += \
|
|||
./Application/User/Startup/startup_stm32wle5ccux.d
|
||||
|
||||
|
||||
# 每个子目录必须为构建它所贡献的源提供规则
|
||||
# Each subdirectory must supply rules for building sources it contributes
|
||||
Application/User/Startup/%.o: ../Application/User/Startup/%.s Application/User/Startup/subdir.mk
|
||||
arm-none-eabi-gcc -mcpu=cortex-m4 -c -x assembler-with-cpp -MMD -MP -MF"$(@:%.o=%.d)" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@" "$<"
|
||||
|
||||
|
|
|
|||
|
|
@ -1,9 +1,9 @@
|
|||
################################################################################
|
||||
# 自动生成的文件。不要编辑！
|
||||
# Automatically-generated file. Do not edit!
|
||||
# Toolchain: GNU Tools for STM32 (11.3.rel1)
|
||||
################################################################################
|
||||
|
||||
# 将这些工具调用的输入和输出添加到构建变量
|
||||
# Add inputs and outputs from these tool invocations to the build variables
|
||||
C_SRCS += \
|
||||
D:/ONEDRIVE/STM32WLV13/Projects/NUCLEO-WL55JC/Applications/LoRaWAN/STS_RR_R125/TOF/App/X-WL55_WLE5_53L0X.c \
|
||||
D:/ONEDRIVE/STM32WLV13/Projects/NUCLEO-WL55JC/Applications/LoRaWAN/STS_RR_R125/TOF/App/app_tof.c \
|
||||
|
|
@ -20,7 +20,7 @@ C_DEPS += \
|
|||
./Application/User/TOF/App/app_tof_vl53l0x_range.d
|
||||
|
||||
|
||||
# 每个子目录必须为构建它所贡献的源提供规则
|
||||
# Each subdirectory must supply rules for building sources it contributes
|
||||
Application/User/TOF/App/X-WL55_WLE5_53L0X.o: D:/ONEDRIVE/STM32WLV13/Projects/NUCLEO-WL55JC/Applications/LoRaWAN/STS_RR_R125/TOF/App/X-WL55_WLE5_53L0X.c Application/User/TOF/App/subdir.mk
|
||||
arm-none-eabi-gcc "$<" -mcpu=cortex-m4 -std=gnu11 -DCORE_CM4 -DYUNHORN_STS_RANDOM -DSTS_O5 -DSTM32WLE5xx -DUSE_HAL_DRIVER -c -I../../Core/Inc -I../../vl53l0x -I../../TOF/App -I../../TOF/Target -I../../LoRaWAN/App -I../../LoRaWAN/Target -I../../../../../../../Drivers/STM32WLxx_HAL_Driver/Inc -I../../../../../../../Drivers/STM32WLxx_HAL_Driver/Inc/Legacy -I../../../../../../../Utilities/trace/adv_trace -I../../../../../../../Utilities/misc -I../../../../../../../Utilities/sequencer -I../../../../../../../Utilities/timer -I../../../../../../../Utilities/lpm/tiny_lpm -I../../../../../../../Middlewares/Third_Party/LoRaWAN/LmHandler/Packages -I../../../../../../../Drivers/CMSIS/Device/ST/STM32WLxx/Include -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Crypto -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Mac/Region -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Mac -I../../../../../../../Middlewares/Third_Party/LoRaWAN/LmHandler -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Utilities -I../../../../../../../Middlewares/Third_Party/SubGHz_Phy -I../../../../../../../Middlewares/ST/STM32_Cryptographic/include -I../../../../../../../Middlewares/Third_Party/SubGHz_Phy/stm32_radio_driver -I../../../../../../../Drivers/CMSIS/Include -I../../../../../../../Drivers/BSP/STM32WLxx_Nucleo -Os -ffunction-sections -fdata-sections -Wall -fstack-usage -fcyclomatic-complexity -MMD -MP -MF"$(@:%.o=%.d)" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@"
|
||||
Application/User/TOF/App/app_tof.o: D:/ONEDRIVE/STM32WLV13/Projects/NUCLEO-WL55JC/Applications/LoRaWAN/STS_RR_R125/TOF/App/app_tof.c Application/User/TOF/App/subdir.mk
|
||||
|
|
|
|||
|
|
@ -1,9 +1,9 @@
|
|||
################################################################################
|
||||
# 自动生成的文件。不要编辑！
|
||||
# Automatically-generated file. Do not edit!
|
||||
# Toolchain: GNU Tools for STM32 (11.3.rel1)
|
||||
################################################################################
|
||||
|
||||
# 将这些工具调用的输入和输出添加到构建变量
|
||||
# Add inputs and outputs from these tool invocations to the build variables
|
||||
C_SRCS += \
|
||||
D:/ONEDRIVE/STM32WLV13/Projects/NUCLEO-WL55JC/Applications/LoRaWAN/STS_RR_R125/TOF/Target/app_tof_pin_conf.c
|
||||
|
||||
|
|
@ -14,7 +14,7 @@ C_DEPS += \
|
|||
./Application/User/TOF/Target/app_tof_pin_conf.d
|
||||
|
||||
|
||||
# 每个子目录必须为构建它所贡献的源提供规则
|
||||
# Each subdirectory must supply rules for building sources it contributes
|
||||
Application/User/TOF/Target/app_tof_pin_conf.o: D:/ONEDRIVE/STM32WLV13/Projects/NUCLEO-WL55JC/Applications/LoRaWAN/STS_RR_R125/TOF/Target/app_tof_pin_conf.c Application/User/TOF/Target/subdir.mk
|
||||
arm-none-eabi-gcc "$<" -mcpu=cortex-m4 -std=gnu11 -DCORE_CM4 -DYUNHORN_STS_RANDOM -DSTS_O5 -DSTM32WLE5xx -DUSE_HAL_DRIVER -c -I../../Core/Inc -I../../vl53l0x -I../../TOF/App -I../../TOF/Target -I../../LoRaWAN/App -I../../LoRaWAN/Target -I../../../../../../../Drivers/STM32WLxx_HAL_Driver/Inc -I../../../../../../../Drivers/STM32WLxx_HAL_Driver/Inc/Legacy -I../../../../../../../Utilities/trace/adv_trace -I../../../../../../../Utilities/misc -I../../../../../../../Utilities/sequencer -I../../../../../../../Utilities/timer -I../../../../../../../Utilities/lpm/tiny_lpm -I../../../../../../../Middlewares/Third_Party/LoRaWAN/LmHandler/Packages -I../../../../../../../Drivers/CMSIS/Device/ST/STM32WLxx/Include -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Crypto -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Mac/Region -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Mac -I../../../../../../../Middlewares/Third_Party/LoRaWAN/LmHandler -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Utilities -I../../../../../../../Middlewares/Third_Party/SubGHz_Phy -I../../../../../../../Middlewares/ST/STM32_Cryptographic/include -I../../../../../../../Middlewares/Third_Party/SubGHz_Phy/stm32_radio_driver -I../../../../../../../Drivers/CMSIS/Include -I../../../../../../../Drivers/BSP/STM32WLxx_Nucleo -Os -ffunction-sections -fdata-sections -Wall -fstack-usage -fcyclomatic-complexity -MMD -MP -MF"$(@:%.o=%.d)" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@"
|
||||
|
||||
|
|
|
|||
|
|
@ -1,9 +1,9 @@
|
|||
################################################################################
|
||||
# 自动生成的文件。不要编辑！
|
||||
# Automatically-generated file. Do not edit!
|
||||
# Toolchain: GNU Tools for STM32 (11.3.rel1)
|
||||
################################################################################
|
||||
|
||||
# 将这些工具调用的输入和输出添加到构建变量
|
||||
# Add inputs and outputs from these tool invocations to the build variables
|
||||
C_SRCS += \
|
||||
D:/ONEDRIVE/STM32WLV13/Projects/NUCLEO-WL55JC/Applications/LoRaWAN/STS_RR_R125/vl53l0x/vl53l0x_api.c \
|
||||
D:/ONEDRIVE/STM32WLV13/Projects/NUCLEO-WL55JC/Applications/LoRaWAN/STS_RR_R125/vl53l0x/vl53l0x_api_calibration.c \
|
||||
|
|
@ -32,7 +32,7 @@ C_DEPS += \
|
|||
./Application/User/TOF/vl53l0x/vl53l0x_platform_log.d
|
||||
|
||||
|
||||
# 每个子目录必须为构建它所贡献的源提供规则
|
||||
# Each subdirectory must supply rules for building sources it contributes
|
||||
Application/User/TOF/vl53l0x/vl53l0x_api.o: D:/ONEDRIVE/STM32WLV13/Projects/NUCLEO-WL55JC/Applications/LoRaWAN/STS_RR_R125/vl53l0x/vl53l0x_api.c Application/User/TOF/vl53l0x/subdir.mk
|
||||
arm-none-eabi-gcc "$<" -mcpu=cortex-m4 -std=gnu11 -DCORE_CM4 -DYUNHORN_STS_RANDOM -DSTS_O5 -DSTM32WLE5xx -DUSE_HAL_DRIVER -c -I../../Core/Inc -I../../vl53l0x -I../../TOF/App -I../../TOF/Target -I../../LoRaWAN/App -I../../LoRaWAN/Target -I../../../../../../../Drivers/STM32WLxx_HAL_Driver/Inc -I../../../../../../../Drivers/STM32WLxx_HAL_Driver/Inc/Legacy -I../../../../../../../Utilities/trace/adv_trace -I../../../../../../../Utilities/misc -I../../../../../../../Utilities/sequencer -I../../../../../../../Utilities/timer -I../../../../../../../Utilities/lpm/tiny_lpm -I../../../../../../../Middlewares/Third_Party/LoRaWAN/LmHandler/Packages -I../../../../../../../Drivers/CMSIS/Device/ST/STM32WLxx/Include -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Crypto -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Mac/Region -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Mac -I../../../../../../../Middlewares/Third_Party/LoRaWAN/LmHandler -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Utilities -I../../../../../../../Middlewares/Third_Party/SubGHz_Phy -I../../../../../../../Middlewares/ST/STM32_Cryptographic/include -I../../../../../../../Middlewares/Third_Party/SubGHz_Phy/stm32_radio_driver -I../../../../../../../Drivers/CMSIS/Include -I../../../../../../../Drivers/BSP/STM32WLxx_Nucleo -Os -ffunction-sections -fdata-sections -Wall -fstack-usage -fcyclomatic-complexity -MMD -MP -MF"$(@:%.o=%.d)" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@"
|
||||
Application/User/TOF/vl53l0x/vl53l0x_api_calibration.o: D:/ONEDRIVE/STM32WLV13/Projects/NUCLEO-WL55JC/Applications/LoRaWAN/STS_RR_R125/vl53l0x/vl53l0x_api_calibration.c Application/User/TOF/vl53l0x/subdir.mk
|
||||
|
|
|
|||
|
|
@ -1,9 +1,9 @@
|
|||
################################################################################
|
||||
# 自动生成的文件。不要编辑！
|
||||
# Automatically-generated file. Do not edit!
|
||||
# Toolchain: GNU Tools for STM32 (11.3.rel1)
|
||||
################################################################################
|
||||
|
||||
# 将这些工具调用的输入和输出添加到构建变量
|
||||
# Add inputs and outputs from these tool invocations to the build variables
|
||||
C_SRCS += \
|
||||
D:/ONEDRIVE/STM32WLV13/Drivers/BSP/STM32WLxx_Nucleo/stm32wlxx_nucleo.c \
|
||||
D:/ONEDRIVE/STM32WLV13/Drivers/BSP/STM32WLxx_Nucleo/stm32wlxx_nucleo_radio.c
|
||||
|
|
@ -17,7 +17,7 @@ C_DEPS += \
|
|||
./Drivers/BSP/STM32WLxx_Nucleo/stm32wlxx_nucleo_radio.d
|
||||
|
||||
|
||||
# 每个子目录必须为构建它所贡献的源提供规则
|
||||
# Each subdirectory must supply rules for building sources it contributes
|
||||
Drivers/BSP/STM32WLxx_Nucleo/stm32wlxx_nucleo.o: D:/ONEDRIVE/STM32WLV13/Drivers/BSP/STM32WLxx_Nucleo/stm32wlxx_nucleo.c Drivers/BSP/STM32WLxx_Nucleo/subdir.mk
|
||||
arm-none-eabi-gcc "$<" -mcpu=cortex-m4 -std=gnu11 -DCORE_CM4 -DYUNHORN_STS_RANDOM -DSTS_O5 -DSTM32WLE5xx -DUSE_HAL_DRIVER -c -I../../Core/Inc -I../../vl53l0x -I../../TOF/App -I../../TOF/Target -I../../LoRaWAN/App -I../../LoRaWAN/Target -I../../../../../../../Drivers/STM32WLxx_HAL_Driver/Inc -I../../../../../../../Drivers/STM32WLxx_HAL_Driver/Inc/Legacy -I../../../../../../../Utilities/trace/adv_trace -I../../../../../../../Utilities/misc -I../../../../../../../Utilities/sequencer -I../../../../../../../Utilities/timer -I../../../../../../../Utilities/lpm/tiny_lpm -I../../../../../../../Middlewares/Third_Party/LoRaWAN/LmHandler/Packages -I../../../../../../../Drivers/CMSIS/Device/ST/STM32WLxx/Include -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Crypto -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Mac/Region -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Mac -I../../../../../../../Middlewares/Third_Party/LoRaWAN/LmHandler -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Utilities -I../../../../../../../Middlewares/Third_Party/SubGHz_Phy -I../../../../../../../Middlewares/ST/STM32_Cryptographic/include -I../../../../../../../Middlewares/Third_Party/SubGHz_Phy/stm32_radio_driver -I../../../../../../../Drivers/CMSIS/Include -I../../../../../../../Drivers/BSP/STM32WLxx_Nucleo -Os -ffunction-sections -fdata-sections -Wall -fstack-usage -fcyclomatic-complexity -MMD -MP -MF"$(@:%.o=%.d)" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@"
|
||||
Drivers/BSP/STM32WLxx_Nucleo/stm32wlxx_nucleo_radio.o: D:/ONEDRIVE/STM32WLV13/Drivers/BSP/STM32WLxx_Nucleo/stm32wlxx_nucleo_radio.c Drivers/BSP/STM32WLxx_Nucleo/subdir.mk
|
||||
|
|
|
|||
|
|
@ -1,9 +1,9 @@
|
|||
################################################################################
|
||||
# 自动生成的文件。不要编辑！
|
||||
# Automatically-generated file. Do not edit!
|
||||
# Toolchain: GNU Tools for STM32 (11.3.rel1)
|
||||
################################################################################
|
||||
|
||||
# 将这些工具调用的输入和输出添加到构建变量
|
||||
# Add inputs and outputs from these tool invocations to the build variables
|
||||
C_SRCS += \
|
||||
D:/ONEDRIVE/STM32WLV13/Projects/NUCLEO-WL55JC/Applications/LoRaWAN/STS_RR_R125/Core/Src/system_stm32wlxx.c
|
||||
|
||||
|
|
@ -14,7 +14,7 @@ C_DEPS += \
|
|||
./Drivers/CMSIS/system_stm32wlxx.d
|
||||
|
||||
|
||||
# 每个子目录必须为构建它所贡献的源提供规则
|
||||
# Each subdirectory must supply rules for building sources it contributes
|
||||
Drivers/CMSIS/system_stm32wlxx.o: D:/ONEDRIVE/STM32WLV13/Projects/NUCLEO-WL55JC/Applications/LoRaWAN/STS_RR_R125/Core/Src/system_stm32wlxx.c Drivers/CMSIS/subdir.mk
|
||||
arm-none-eabi-gcc "$<" -mcpu=cortex-m4 -std=gnu11 -DCORE_CM4 -DYUNHORN_STS_RANDOM -DSTS_O5 -DSTM32WLE5xx -DUSE_HAL_DRIVER -c -I../../Core/Inc -I../../vl53l0x -I../../TOF/App -I../../TOF/Target -I../../LoRaWAN/App -I../../LoRaWAN/Target -I../../../../../../../Drivers/STM32WLxx_HAL_Driver/Inc -I../../../../../../../Drivers/STM32WLxx_HAL_Driver/Inc/Legacy -I../../../../../../../Utilities/trace/adv_trace -I../../../../../../../Utilities/misc -I../../../../../../../Utilities/sequencer -I../../../../../../../Utilities/timer -I../../../../../../../Utilities/lpm/tiny_lpm -I../../../../../../../Middlewares/Third_Party/LoRaWAN/LmHandler/Packages -I../../../../../../../Drivers/CMSIS/Device/ST/STM32WLxx/Include -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Crypto -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Mac/Region -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Mac -I../../../../../../../Middlewares/Third_Party/LoRaWAN/LmHandler -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Utilities -I../../../../../../../Middlewares/Third_Party/SubGHz_Phy -I../../../../../../../Middlewares/ST/STM32_Cryptographic/include -I../../../../../../../Middlewares/Third_Party/SubGHz_Phy/stm32_radio_driver -I../../../../../../../Drivers/CMSIS/Include -I../../../../../../../Drivers/BSP/STM32WLxx_Nucleo -Os -ffunction-sections -fdata-sections -Wall -fstack-usage -fcyclomatic-complexity -MMD -MP -MF"$(@:%.o=%.d)" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@"
|
||||
|
||||
|
|
|
|||
|
|
@ -1,9 +1,9 @@
|
|||
################################################################################
|
||||
# 自动生成的文件。不要编辑！
|
||||
# Automatically-generated file. Do not edit!
|
||||
# Toolchain: GNU Tools for STM32 (11.3.rel1)
|
||||
################################################################################
|
||||
|
||||
# 将这些工具调用的输入和输出添加到构建变量
|
||||
# Add inputs and outputs from these tool invocations to the build variables
|
||||
C_SRCS += \
|
||||
D:/ONEDRIVE/STM32WLV13/Drivers/STM32WLxx_HAL_Driver/Src/stm32wlxx_hal.c \
|
||||
D:/ONEDRIVE/STM32WLV13/Drivers/STM32WLxx_HAL_Driver/Src/stm32wlxx_hal_adc.c \
|
||||
|
|
@ -83,7 +83,7 @@ C_DEPS += \
|
|||
./Drivers/STM32WLxx_HAL_Driver/stm32wlxx_ll_adc.d
|
||||
|
||||
|
||||
# 每个子目录必须为构建它所贡献的源提供规则
|
||||
# Each subdirectory must supply rules for building sources it contributes
|
||||
Drivers/STM32WLxx_HAL_Driver/stm32wlxx_hal.o: D:/ONEDRIVE/STM32WLV13/Drivers/STM32WLxx_HAL_Driver/Src/stm32wlxx_hal.c Drivers/STM32WLxx_HAL_Driver/subdir.mk
|
||||
arm-none-eabi-gcc "$<" -mcpu=cortex-m4 -std=gnu11 -DCORE_CM4 -DYUNHORN_STS_RANDOM -DSTS_O5 -DSTM32WLE5xx -DUSE_HAL_DRIVER -c -I../../Core/Inc -I../../vl53l0x -I../../TOF/App -I../../TOF/Target -I../../LoRaWAN/App -I../../LoRaWAN/Target -I../../../../../../../Drivers/STM32WLxx_HAL_Driver/Inc -I../../../../../../../Drivers/STM32WLxx_HAL_Driver/Inc/Legacy -I../../../../../../../Utilities/trace/adv_trace -I../../../../../../../Utilities/misc -I../../../../../../../Utilities/sequencer -I../../../../../../../Utilities/timer -I../../../../../../../Utilities/lpm/tiny_lpm -I../../../../../../../Middlewares/Third_Party/LoRaWAN/LmHandler/Packages -I../../../../../../../Drivers/CMSIS/Device/ST/STM32WLxx/Include -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Crypto -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Mac/Region -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Mac -I../../../../../../../Middlewares/Third_Party/LoRaWAN/LmHandler -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Utilities -I../../../../../../../Middlewares/Third_Party/SubGHz_Phy -I../../../../../../../Middlewares/ST/STM32_Cryptographic/include -I../../../../../../../Middlewares/Third_Party/SubGHz_Phy/stm32_radio_driver -I../../../../../../../Drivers/CMSIS/Include -I../../../../../../../Drivers/BSP/STM32WLxx_Nucleo -Os -ffunction-sections -fdata-sections -Wall -fstack-usage -fcyclomatic-complexity -MMD -MP -MF"$(@:%.o=%.d)" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@"
|
||||
Drivers/STM32WLxx_HAL_Driver/stm32wlxx_hal_adc.o: D:/ONEDRIVE/STM32WLV13/Drivers/STM32WLxx_HAL_Driver/Src/stm32wlxx_hal_adc.c Drivers/STM32WLxx_HAL_Driver/subdir.mk
|
||||
|
|
|
|||
|
|
@ -1,9 +1,9 @@
|
|||
################################################################################
|
||||
# 自动生成的文件。不要编辑！
|
||||
# Automatically-generated file. Do not edit!
|
||||
# Toolchain: GNU Tools for STM32 (11.3.rel1)
|
||||
################################################################################
|
||||
|
||||
# 将这些工具调用的输入和输出添加到构建变量
|
||||
# Add inputs and outputs from these tool invocations to the build variables
|
||||
C_SRCS += \
|
||||
D:/ONEDRIVE/STM32WLV13/Middlewares/Third_Party/LoRaWAN/LmHandler/LmHandler.c \
|
||||
D:/ONEDRIVE/STM32WLV13/Middlewares/Third_Party/LoRaWAN/LmHandler/Packages/LmhpCompliance.c \
|
||||
|
|
@ -110,7 +110,7 @@ C_DEPS += \
|
|||
./Middlewares/LoRaWAN/utilities.d
|
||||
|
||||
|
||||
# 每个子目录必须为构建它所贡献的源提供规则
|
||||
# Each subdirectory must supply rules for building sources it contributes
|
||||
Middlewares/LoRaWAN/LmHandler.o: D:/ONEDRIVE/STM32WLV13/Middlewares/Third_Party/LoRaWAN/LmHandler/LmHandler.c Middlewares/LoRaWAN/subdir.mk
|
||||
arm-none-eabi-gcc "$<" -mcpu=cortex-m4 -std=gnu11 -DCORE_CM4 -DYUNHORN_STS_RANDOM -DSTS_O5 -DSTM32WLE5xx -DUSE_HAL_DRIVER -c -I../../Core/Inc -I../../vl53l0x -I../../TOF/App -I../../TOF/Target -I../../LoRaWAN/App -I../../LoRaWAN/Target -I../../../../../../../Drivers/STM32WLxx_HAL_Driver/Inc -I../../../../../../../Drivers/STM32WLxx_HAL_Driver/Inc/Legacy -I../../../../../../../Utilities/trace/adv_trace -I../../../../../../../Utilities/misc -I../../../../../../../Utilities/sequencer -I../../../../../../../Utilities/timer -I../../../../../../../Utilities/lpm/tiny_lpm -I../../../../../../../Middlewares/Third_Party/LoRaWAN/LmHandler/Packages -I../../../../../../../Drivers/CMSIS/Device/ST/STM32WLxx/Include -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Crypto -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Mac/Region -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Mac -I../../../../../../../Middlewares/Third_Party/LoRaWAN/LmHandler -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Utilities -I../../../../../../../Middlewares/Third_Party/SubGHz_Phy -I../../../../../../../Middlewares/ST/STM32_Cryptographic/include -I../../../../../../../Middlewares/Third_Party/SubGHz_Phy/stm32_radio_driver -I../../../../../../../Drivers/CMSIS/Include -I../../../../../../../Drivers/BSP/STM32WLxx_Nucleo -Os -ffunction-sections -fdata-sections -Wall -fstack-usage -fcyclomatic-complexity -MMD -MP -MF"$(@:%.o=%.d)" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@"
|
||||
Middlewares/LoRaWAN/LmhpCompliance.o: D:/ONEDRIVE/STM32WLV13/Middlewares/Third_Party/LoRaWAN/LmHandler/Packages/LmhpCompliance.c Middlewares/LoRaWAN/subdir.mk
|
||||
|
|
|
|||
|
|
@ -1,9 +1,9 @@
|
|||
################################################################################
|
||||
# 自动生成的文件。不要编辑！
|
||||
# Automatically-generated file. Do not edit!
|
||||
# Toolchain: GNU Tools for STM32 (11.3.rel1)
|
||||
################################################################################
|
||||
|
||||
# 将这些工具调用的输入和输出添加到构建变量
|
||||
# Add inputs and outputs from these tool invocations to the build variables
|
||||
C_SRCS += \
|
||||
D:/ONEDRIVE/STM32WLV13/Middlewares/Third_Party/SubGHz_Phy/stm32_radio_driver/radio.c \
|
||||
D:/ONEDRIVE/STM32WLV13/Middlewares/Third_Party/SubGHz_Phy/stm32_radio_driver/radio_driver.c \
|
||||
|
|
@ -20,7 +20,7 @@ C_DEPS += \
|
|||
./Middlewares/SubGHz_Phy/radio_fw.d
|
||||
|
||||
|
||||
# 每个子目录必须为构建它所贡献的源提供规则
|
||||
# Each subdirectory must supply rules for building sources it contributes
|
||||
Middlewares/SubGHz_Phy/radio.o: D:/ONEDRIVE/STM32WLV13/Middlewares/Third_Party/SubGHz_Phy/stm32_radio_driver/radio.c Middlewares/SubGHz_Phy/subdir.mk
|
||||
arm-none-eabi-gcc "$<" -mcpu=cortex-m4 -std=gnu11 -DCORE_CM4 -DYUNHORN_STS_RANDOM -DSTS_O5 -DSTM32WLE5xx -DUSE_HAL_DRIVER -c -I../../Core/Inc -I../../vl53l0x -I../../TOF/App -I../../TOF/Target -I../../LoRaWAN/App -I../../LoRaWAN/Target -I../../../../../../../Drivers/STM32WLxx_HAL_Driver/Inc -I../../../../../../../Drivers/STM32WLxx_HAL_Driver/Inc/Legacy -I../../../../../../../Utilities/trace/adv_trace -I../../../../../../../Utilities/misc -I../../../../../../../Utilities/sequencer -I../../../../../../../Utilities/timer -I../../../../../../../Utilities/lpm/tiny_lpm -I../../../../../../../Middlewares/Third_Party/LoRaWAN/LmHandler/Packages -I../../../../../../../Drivers/CMSIS/Device/ST/STM32WLxx/Include -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Crypto -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Mac/Region -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Mac -I../../../../../../../Middlewares/Third_Party/LoRaWAN/LmHandler -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Utilities -I../../../../../../../Middlewares/Third_Party/SubGHz_Phy -I../../../../../../../Middlewares/ST/STM32_Cryptographic/include -I../../../../../../../Middlewares/Third_Party/SubGHz_Phy/stm32_radio_driver -I../../../../../../../Drivers/CMSIS/Include -I../../../../../../../Drivers/BSP/STM32WLxx_Nucleo -Os -ffunction-sections -fdata-sections -Wall -fstack-usage -fcyclomatic-complexity -MMD -MP -MF"$(@:%.o=%.d)" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@"
|
||||
Middlewares/SubGHz_Phy/radio_driver.o: D:/ONEDRIVE/STM32WLV13/Middlewares/Third_Party/SubGHz_Phy/stm32_radio_driver/radio_driver.c Middlewares/SubGHz_Phy/subdir.mk
|
||||
|
|
|
|||
|
|
@ -1,9 +1,9 @@
|
|||
################################################################################
|
||||
# 自动生成的文件。不要编辑！
|
||||
# Automatically-generated file. Do not edit!
|
||||
# Toolchain: GNU Tools for STM32 (11.3.rel1)
|
||||
################################################################################
|
||||
|
||||
# 将这些工具调用的输入和输出添加到构建变量
|
||||
# Add inputs and outputs from these tool invocations to the build variables
|
||||
C_SRCS += \
|
||||
D:/ONEDRIVE/STM32WLV13/Utilities/trace/adv_trace/stm32_adv_trace.c \
|
||||
D:/ONEDRIVE/STM32WLV13/Utilities/lpm/tiny_lpm/stm32_lpm.c \
|
||||
|
|
@ -35,7 +35,7 @@ C_DEPS += \
|
|||
./Utilities/stm32_tiny_vsnprintf.d
|
||||
|
||||
|
||||
# 每个子目录必须为构建它所贡献的源提供规则
|
||||
# Each subdirectory must supply rules for building sources it contributes
|
||||
Utilities/stm32_adv_trace.o: D:/ONEDRIVE/STM32WLV13/Utilities/trace/adv_trace/stm32_adv_trace.c Utilities/subdir.mk
|
||||
arm-none-eabi-gcc "$<" -mcpu=cortex-m4 -std=gnu11 -DCORE_CM4 -DYUNHORN_STS_RANDOM -DSTS_O5 -DSTM32WLE5xx -DUSE_HAL_DRIVER -c -I../../Core/Inc -I../../vl53l0x -I../../TOF/App -I../../TOF/Target -I../../LoRaWAN/App -I../../LoRaWAN/Target -I../../../../../../../Drivers/STM32WLxx_HAL_Driver/Inc -I../../../../../../../Drivers/STM32WLxx_HAL_Driver/Inc/Legacy -I../../../../../../../Utilities/trace/adv_trace -I../../../../../../../Utilities/misc -I../../../../../../../Utilities/sequencer -I../../../../../../../Utilities/timer -I../../../../../../../Utilities/lpm/tiny_lpm -I../../../../../../../Middlewares/Third_Party/LoRaWAN/LmHandler/Packages -I../../../../../../../Drivers/CMSIS/Device/ST/STM32WLxx/Include -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Crypto -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Mac/Region -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Mac -I../../../../../../../Middlewares/Third_Party/LoRaWAN/LmHandler -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Utilities -I../../../../../../../Middlewares/Third_Party/SubGHz_Phy -I../../../../../../../Middlewares/ST/STM32_Cryptographic/include -I../../../../../../../Middlewares/Third_Party/SubGHz_Phy/stm32_radio_driver -I../../../../../../../Drivers/CMSIS/Include -I../../../../../../../Drivers/BSP/STM32WLxx_Nucleo -Os -ffunction-sections -fdata-sections -Wall -fstack-usage -fcyclomatic-complexity -MMD -MP -MF"$(@:%.o=%.d)" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@"
|
||||
Utilities/stm32_lpm.o: D:/ONEDRIVE/STM32WLV13/Utilities/lpm/tiny_lpm/stm32_lpm.c Utilities/subdir.mk
|
||||
|
|
|
|||
|
|
@ -1,5 +1,5 @@
|
|||
################################################################################
|
||||
# 自动生成的文件。不要编辑！
|
||||
# Automatically-generated file. Do not edit!
|
||||
# Toolchain: GNU Tools for STM32 (11.3.rel1)
|
||||
################################################################################
|
||||
|
||||
|
|
@ -7,7 +7,7 @@
|
|||
|
||||
RM := rm -rf
|
||||
|
||||
# 此处定义了参与生成的所有源
|
||||
# All of the sources participating in the build are defined here
|
||||
-include sources.mk
|
||||
-include Utilities/subdir.mk
|
||||
-include Middlewares/SubGHz_Phy/subdir.mk
|
||||
|
|
@ -50,7 +50,7 @@ BUILD_ARTIFACT_EXTENSION := elf
|
|||
BUILD_ARTIFACT_PREFIX :=
|
||||
BUILD_ARTIFACT := $(BUILD_ARTIFACT_PREFIX)$(BUILD_ARTIFACT_NAME)$(if $(BUILD_ARTIFACT_EXTENSION),.$(BUILD_ARTIFACT_EXTENSION),)
|
||||
|
||||
# 将这些工具调用的输入和输出添加到构建变量
|
||||
# Add inputs and outputs from these tool invocations to the build variables
|
||||
EXECUTABLES += \
|
||||
STS_RR_R125.elf \
|
||||
|
||||
|
|
@ -70,39 +70,39 @@ OBJCOPY_BIN += \
|
|||
STS_RR_R125.bin \
|
||||
|
||||
|
||||
# 所有目标
|
||||
# All Target
|
||||
all: main-build
|
||||
|
||||
# 主构建目标
|
||||
# Main-build Target
|
||||
main-build: STS_RR_R125.elf secondary-outputs
|
||||
|
||||
# 工具调用
|
||||
# Tool invocations
|
||||
STS_RR_R125.elf STS_RR_R125.map: $(OBJS) $(USER_OBJS) D:\ONEDRIVE\STM32WLV13\Projects\NUCLEO-WL55JC\Applications\LoRaWAN\STS_RR_R125\STM32CubeIDE\STM32WLE5CCUX_FLASH.ld makefile objects.list $(OPTIONAL_TOOL_DEPS)
|
||||
arm-none-eabi-gcc -o "STS_RR_R125.elf" @"objects.list" $(USER_OBJS) $(LIBS) -mcpu=cortex-m4 -T"D:\ONEDRIVE\STM32WLV13\Projects\NUCLEO-WL55JC\Applications\LoRaWAN\STS_RR_R125\STM32CubeIDE\STM32WLE5CCUX_FLASH.ld" --specs=nosys.specs -Wl,-Map="STS_RR_R125.map" -Wl,--gc-sections -static -L../../../../../../../Middlewares/ST/STM32_Cryptographic/lib --specs=nano.specs -mfloat-abi=soft -mthumb -Wl,--start-group -lc -lm -Wl,--end-group
|
||||
@echo '已结束构建目标： $@'
|
||||
@echo 'Finished building target: $@'
|
||||
@echo ' '
|
||||
|
||||
default.size.stdout: $(EXECUTABLES) makefile objects.list $(OPTIONAL_TOOL_DEPS)
|
||||
arm-none-eabi-size $(EXECUTABLES)
|
||||
@echo '已结束构建： $@'
|
||||
@echo 'Finished building: $@'
|
||||
@echo ' '
|
||||
|
||||
STS_RR_R125.list: $(EXECUTABLES) makefile objects.list $(OPTIONAL_TOOL_DEPS)
|
||||
arm-none-eabi-objdump -h -S $(EXECUTABLES) > "STS_RR_R125.list"
|
||||
@echo '已结束构建： $@'
|
||||
@echo 'Finished building: $@'
|
||||
@echo ' '
|
||||
|
||||
STS_RR_R125.hex: $(EXECUTABLES) makefile objects.list $(OPTIONAL_TOOL_DEPS)
|
||||
arm-none-eabi-objcopy -O ihex $(EXECUTABLES) "STS_RR_R125.hex"
|
||||
@echo '已结束构建： $@'
|
||||
@echo 'Finished building: $@'
|
||||
@echo ' '
|
||||
|
||||
STS_RR_R125.bin: $(EXECUTABLES) makefile objects.list $(OPTIONAL_TOOL_DEPS)
|
||||
arm-none-eabi-objcopy -O binary $(EXECUTABLES) "STS_RR_R125.bin"
|
||||
@echo '已结束构建： $@'
|
||||
@echo 'Finished building: $@'
|
||||
@echo ' '
|
||||
|
||||
# 其他目标
|
||||
# Other Targets
|
||||
clean:
|
||||
-$(RM) STS_RR_R125.bin STS_RR_R125.elf STS_RR_R125.hex STS_RR_R125.list STS_RR_R125.map default.size.stdout
|
||||
-@echo ' '
|
||||
|
|
|
|||
|
|
@ -1,5 +1,5 @@
|
|||
################################################################################
|
||||
# 自动生成的文件。不要编辑！
|
||||
# Automatically-generated file. Do not edit!
|
||||
# Toolchain: GNU Tools for STM32 (11.3.rel1)
|
||||
################################################################################
|
||||
|
||||
|
|
|
|||
|
|
@ -1,5 +1,5 @@
|
|||
################################################################################
|
||||
# 自动生成的文件。不要编辑！
|
||||
# Automatically-generated file. Do not edit!
|
||||
# Toolchain: GNU Tools for STM32 (11.3.rel1)
|
||||
################################################################################
|
||||
|
||||
|
|
@ -22,7 +22,7 @@ S_UPPER_DEPS :=
|
|||
C_DEPS :=
|
||||
OBJCOPY_BIN :=
|
||||
|
||||
# 此处必须描述包含源文件的每个子目录
|
||||
# Every subdirectory with source files must be described here
|
||||
SUBDIRS := \
|
||||
Application/User/Core \
|
||||
Application/User/LoRaWAN/App \
|
||||
|
|
|
|||
Loading…
Reference in New Issue