remove unused code

Core/Src/stm32_lpm_if.c

@@ -80,55 +80,20 @@ const struct UTIL_LPM_Driver_s UTIL_PowerDriver =
 
 void PWR_EnterOffMode(void)
 {
-#if 0
-	//HAL_GPIO_WritePin(GPIOB, GPIO_PIN_2, GPIO_PIN_RESET); /* LED OFF */
-	  HAL_SuspendTick();
-	  HAL_UART_DeInit(&huart2);
-	  //LL_PWR_ClearFlag_WU();
-	  //__HAL_PWR_CLEAR_FLAG(PWR_FLAG_SB);
-	  __HAL_PWR_CLEAR_FLAG(PWR_FLAG_WU);
-	  __HAL_PWR_CLEAR_FLAG(PWR_FLAG_LPMODES);
-	  //LL_PWR_ClearFlag_WU();
-	  HAL_PWR_EnterSTANDBYMode();
-#endif
-	  POWER_OFF;
-		//HAL_UART_DeInit(&huart2);
-		//vcom_DeInit();
 		HAL_GPIO_DeInit(GPIOA,GPIO_PIN_All);
 		HAL_GPIO_DeInit(GPIOB,GPIO_PIN_All);
 		HAL_GPIO_DeInit(GPIOC,GPIO_PIN_All);
 	  HAL_SuspendTick();
 	  HAL_PWR_EnterSTANDBYMode();
-#if 0
-	LED_OFF;
-	HAL_UART_DeInit(&huart2);
-  HAL_PWR_DisableWakeUpPin(PWR_WAKEUP_PIN1);//禁用所有使用的唤醒源:PWR_WAKEUP_PIN1 connected to PA.00
-  __HAL_PWR_CLEAR_FLAG(PWR_FLAG_WU);//清除所有相关的唤醒标志
-  HAL_PWR_EnableWakeUpPin(PWR_WAKEUP_PIN1);//启用连接到PA.00的WakeUp Pin
-  HAL_PWR_EnterSTANDBYMode();//进入待机模式
 
-  /* USER CODE BEGIN EnterOffMode_1 */
-	HAL_PWR_EnterSTANDBYMode();
-  /* USER CODE END EnterOffMode_1 */
-#endif
 }
 
 void PWR_ExitOffMode(void)
 {
   /* USER CODE BEGIN ExitOffMode_1 */
-#if 1
-	POWER_ON;
 	HAL_ResumeTick();
-	  //__HAL_PWR_CLEAR_FLAG(PWR_FLAG_SB);
-	//HAL_GPIO_WritePin(GPIOB, GPIO_PIN_2, GPIO_PIN_SET); /* LED ON */
 	return;
-#endif
 
-#if 0
-    __HAL_PWR_CLEAR_FLAG(PWR_FLAG_SB);
-    LED_ON;
-    HAL_Delay(200);
-#endif
   /* USER CODE END ExitOffMode_1 */
 }
 
@@ -136,8 +101,7 @@ void PWR_EnterStopMode(void)
 {
   /* USER CODE BEGIN EnterStopMode_1 */
 	POWER_OFF;
-	//HAL_UART_DeInit(&huart2);
-	//vcom_DeInit();
+
 	HAL_GPIO_DeInit(GPIOA,GPIO_PIN_All);
 	HAL_GPIO_DeInit(GPIOB,GPIO_PIN_All);
 	HAL_GPIO_DeInit(GPIOC,GPIO_PIN_All);

Core/Src/stm32wlxx_it.c

@@ -65,20 +65,8 @@ extern UART_HandleTypeDef huart2;
 extern DMA_HandleTypeDef hdma_i2c2_rx;
 extern DMA_HandleTypeDef hdma_i2c2_tx;
 
-//extern DMA_HandleTypeDef hdma_spi1_rx;
-//extern DMA_HandleTypeDef hdma_spi1_tx;
-//extern SPI_HandleTypeDef hspi1;
-
-
-//extern DMA_HandleTypeDef hdma_tim1_up;
-//extern DMA_HandleTypeDef hdma_tim2_up;
-//extern TIM_HandleTypeDef htim1;
-//extern TIM_HandleTypeDef htim2;
-//extern TIM_HandleTypeDef htim16;
 extern DMA_HandleTypeDef hdma_usart2_tx;
-#if 0
-extern DMA_HandleTypeDef hdma_usart2_rx;
-#endif
+
 
 /* USER CODE BEGIN EV */