sundp
/
STS_RR_R125
1
0
Fork 0
Code Issues Pull Requests 1 Packages Projects Releases Wiki Activity

try tps ...

This commit is contained in:
Yunhorn 2024-05-27 18:03:32 +08:00
parent d092dbaea5
commit 9baae59893
6 changed files with 52 additions and 15 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

16
Core/Src/gpio.c
View File

@ -50,13 +50,14 @@ void MX_GPIO_Init(void)
__HAL_RCC_GPIOA_CLK_ENABLE();
__HAL_RCC_GPIOB_CLK_ENABLE();
__HAL_RCC_GPIOC_CLK_ENABLE();
#if 1
GPIO_InitStruct.Pin = GPIO_PIN_All;
GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = GPIO_NOPULL;
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
//HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
#endif
//__HAL_RCC_GPIOA_CLK_DISABLE();
//__HAL_RCC_GPIOB_CLK_DISABLE();
__HAL_RCC_GPIOC_CLK_DISABLE();
@ -67,6 +68,10 @@ void MX_GPIO_Init(void)
|LED3_Pin, GPIO_PIN_RESET);
#endif
/*Configure GPIO pin Output Level */
HAL_GPIO_WritePin(MEMS_POWER_GPIO_Port, MEMS_POWER_Pin, GPIO_PIN_RESET);
#if defined(TOF_1)
HAL_GPIO_WritePin(TOF_C_XSHUT_GPIO_Port, TOF_C_XSHUT_Pin, GPIO_PIN_SET);
#endif
@ -141,7 +146,7 @@ void MX_GPIO_Init(void)
#if (defined(TOF_1) && defined(TOF_2))
GPIO_InitStruct.Pin = TOF_C_XSHUT_Pin;
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
GPIO_InitStruct.Pull = GPIO_PULLUP;
GPIO_InitStruct.Pull = GPIO_PULLDOWN;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
HAL_GPIO_Init(TOF_C_XSHUT_GPIO_Port, &GPIO_InitStruct);
#endif
@ -149,7 +154,7 @@ void MX_GPIO_Init(void)
#if (defined(TOF_2)&&defined(TOF_1))
GPIO_InitStruct.Pin = TOF_L_XSHUT_Pin;
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
GPIO_InitStruct.Pull = GPIO_PULLUP;
GPIO_InitStruct.Pull = GPIO_PULLDOWN;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
HAL_GPIO_Init(TOF_L_XSHUT_GPIO_Port, &GPIO_InitStruct);
#endif
@ -206,11 +211,12 @@ HAL_GPIO_Init(SOAP_SWITCH_GPIO_Port, &GPIO_InitStruct);
HAL_NVIC_SetPriority(EXTI1_IRQn, 0, 0);
HAL_NVIC_EnableIRQ(EXTI1_IRQn);
#endif
#if 0
#if (defined(TOF_1) && defined(TOF_2))
HAL_NVIC_SetPriority(TOF_C_INT_EXTI_IRQn, 0, 0);
HAL_NVIC_EnableIRQ(TOF_C_INT_EXTI_IRQn);
#endif
#endif
#if (defined(TOF_2)&&!defined(TOF_1))
HAL_NVIC_SetPriority(TOF_L_INT_EXTI_IRQn, 0, 0);
HAL_NVIC_EnableIRQ(TOF_L_INT_EXTI_IRQn);

23
Core/Src/main.c
View File

@ -108,11 +108,34 @@ int main(void)
/* Initialize all configured peripherals */
MX_GPIO_Init();
while (1)
{
HAL_GPIO_WritePin(MEMS_POWER_GPIO_Port, MEMS_POWER_Pin, GPIO_PIN_RESET);
HAL_Delay(5000);
HAL_GPIO_WritePin(MEMS_POWER_GPIO_Port, MEMS_POWER_Pin, GPIO_PIN_SET);
HAL_Delay(5000);
}
MX_DMA_Init();
MX_I2C2_Init();
while (1)
{
PME_OFF;
HAL_Delay(5000);
PME_ON;
HAL_Delay(5000);
}
MX_LoRaWAN_Init();
/* USER CODE BEGIN 2 */

15
Core/Src/stm32_lpm_if.c
View File

@ -81,7 +81,9 @@ const struct UTIL_LPM_Driver_s UTIL_PowerDriver =
void PWR_EnterOffMode(void)
{
/* USER CODE BEGIN EnterOffMode_1 */
#if 1
#if 0
PME_OFF;
HAL_GPIO_WritePin(GPIOA, GPIO_PIN_All&(~GPIO_PIN_9), GPIO_PIN_RESET);
HAL_GPIO_WritePin(GPIOB, GPIO_PIN_All&(~GPIO_PIN_5)&(~GPIO_PIN_3)&(~GPIO_PIN_4), GPIO_PIN_RESET);
HAL_GPIO_WritePin(GPIOC, GPIO_PIN_All, GPIO_PIN_RESET);
@ -96,7 +98,7 @@ void PWR_EnterOffMode(void)
void PWR_ExitOffMode(void)
{
/* USER CODE BEGIN ExitOffMode_1 */
#if 1
#if 0
HAL_ResumeTick();
return;
#endif
@ -107,8 +109,11 @@ void PWR_EnterStopMode(void)
{
/* USER CODE BEGIN EnterStopMode_1 */
//WORKABLE CONFIG
HAL_GPIO_WritePin(GPIOA, GPIO_PIN_All&(~GPIO_PIN_9), GPIO_PIN_RESET);
HAL_GPIO_WritePin(GPIOB, GPIO_PIN_All&(~GPIO_PIN_5)&(~GPIO_PIN_3)&(~GPIO_PIN_4), GPIO_PIN_RESET);
//PME_OFF;
//HAL_GPIO_WritePin(GPIOA, GPIO_PIN_All&(~GPIO_PIN_9), GPIO_PIN_RESET);
//HAL_GPIO_WritePin(GPIOB, GPIO_PIN_All&(~GPIO_PIN_5)&(~GPIO_PIN_3)&(~GPIO_PIN_4), GPIO_PIN_RESET);
HAL_GPIO_WritePin(GPIOA, GPIO_PIN_All, GPIO_PIN_RESET);
HAL_GPIO_WritePin(GPIOB, GPIO_PIN_All, GPIO_PIN_RESET);
HAL_GPIO_WritePin(GPIOC, GPIO_PIN_All, GPIO_PIN_RESET);
/* USER CODE END EnterStopMode_1 */
@ -140,7 +145,7 @@ void PWR_ExitStopMode(void)
SRAM ctrls, DMAx, DMAMux, AES, RNG, HSEM */
/* Resume not retained USARTx and DMA */
//vcom_Resume(); //DON'T REMOVE THIS, KKEP LOW POWER
vcom_Resume(); //DON'T REMOVE THIS, KKEP LOW POWER
/* USER CODE BEGIN ExitStopMode_2 */
MX_GPIO_Init();
MX_DMA_Init();

3
Core/Src/stm32wlxx_it.c
View File

@ -358,6 +358,7 @@ void DMA1_Channel7_IRQHandler(void)
/* USER CODE END DMA1_Channel7_IRQn 1 */
}
#endif
#if 0
void EXTI3_IRQHandler(void)
{
/* USER CODE BEGIN EXTI3_IRQn 0 */
@ -370,7 +371,7 @@ void EXTI3_IRQHandler(void)
/* USER CODE END EXTI3_IRQn 1 */
}
#endif
#if 0
/**
* @brief This function handles EXTI Lines [4] Interrupt.

6
Core/Src/yunhorn_sts_process.c
View File

@ -521,9 +521,10 @@ void STS_SENSOR_Power_ON(uint8_t cnt)
case 0:
case 1:
case 2:
PME_ON;
HAL_GPIO_WritePin(MEMS_POWER_GPIO_Port, MEMS_POWER_Pin, GPIO_PIN_SET);
break;
default:
HAL_GPIO_WritePin(MEMS_POWER_GPIO_Port, MEMS_POWER_Pin, GPIO_PIN_SET);
break;
}
@ -534,9 +535,10 @@ void STS_SENSOR_Power_OFF(uint8_t cnt)
case 0:
case 1:
case 2:
PME_OFF;
HAL_GPIO_WritePin(MEMS_POWER_GPIO_Port, MEMS_POWER_Pin, GPIO_PIN_RESET);
break;
default:
HAL_GPIO_WritePin(MEMS_POWER_GPIO_Port, MEMS_POWER_Pin, GPIO_PIN_RESET);
break;
}
}

4
STM32CubeIDE/.settings/language.settings.xml
View File

@ -5,7 +5,7 @@
<provider copy-of="extension" id="org.eclipse.cdt.ui.UserLanguageSettingsProvider"/>
<provider-reference id="org.eclipse.cdt.core.ReferencedProjectsLanguageSettingsProvider" ref="shared-provider"/>
<provider-reference id="org.eclipse.cdt.managedbuilder.core.MBSLanguageSettingsProvider" ref="shared-provider"/>
<provider class="com.st.stm32cube.ide.mcu.toolchain.armnone.setup.CrossBuiltinSpecsDetector" console="false" env-hash="-877539789554811708" id="com.st.stm32cube.ide.mcu.toolchain.armnone.setup.CrossBuiltinSpecsDetector" keep-relative-paths="false" name="MCU ARM GCC Built-in Compiler Settings" parameter="${COMMAND} ${FLAGS} -E -P -v -dD &quot;${INPUTS}&quot;" prefer-non-shared="true">
<provider class="com.st.stm32cube.ide.mcu.toolchain.armnone.setup.CrossBuiltinSpecsDetector" console="false" env-hash="-752586124573436390" id="com.st.stm32cube.ide.mcu.toolchain.armnone.setup.CrossBuiltinSpecsDetector" keep-relative-paths="false" name="MCU ARM GCC Built-in Compiler Settings" parameter="${COMMAND} ${FLAGS} -E -P -v -dD &quot;${INPUTS}&quot;" prefer-non-shared="true">
<language-scope id="org.eclipse.cdt.core.gcc"/>
<language-scope id="org.eclipse.cdt.core.g++"/>
</provider>
@ -16,7 +16,7 @@
<provider copy-of="extension" id="org.eclipse.cdt.ui.UserLanguageSettingsProvider"/>
<provider-reference id="org.eclipse.cdt.core.ReferencedProjectsLanguageSettingsProvider" ref="shared-provider"/>
<provider-reference id="org.eclipse.cdt.managedbuilder.core.MBSLanguageSettingsProvider" ref="shared-provider"/>
<provider class="com.st.stm32cube.ide.mcu.toolchain.armnone.setup.CrossBuiltinSpecsDetector" console="false" env-hash="-877539789554811708" id="com.st.stm32cube.ide.mcu.toolchain.armnone.setup.CrossBuiltinSpecsDetector" keep-relative-paths="false" name="MCU ARM GCC Built-in Compiler Settings" parameter="${COMMAND} ${FLAGS} -E -P -v -dD &quot;${INPUTS}&quot;" prefer-non-shared="true">
<provider class="com.st.stm32cube.ide.mcu.toolchain.armnone.setup.CrossBuiltinSpecsDetector" console="false" env-hash="-752586124573436390" id="com.st.stm32cube.ide.mcu.toolchain.armnone.setup.CrossBuiltinSpecsDetector" keep-relative-paths="false" name="MCU ARM GCC Built-in Compiler Settings" parameter="${COMMAND} ${FLAGS} -E -P -v -dD &quot;${INPUTS}&quot;" prefer-non-shared="true">
<language-scope id="org.eclipse.cdt.core.gcc"/>
<language-scope id="org.eclipse.cdt.core.g++"/>
</provider>