new board, PB3/PB5 exchanged, 5uA
This commit is contained in:
parent
2d57b3d4d5
commit
eb8a58b066
Core
STM32CubeIDE
.settings
Release
STM32WLE5CCUX_FLASH.ld|
|
@ -114,7 +114,8 @@ void MX_TOF_Init(void);
|
|||
|
||||
#define MEMS_RESET_Pin GPIO_PIN_4
|
||||
#define MEMS_RESET_GPIO_Port GPIOB
|
||||
|
||||
#define POWER_OFF HAL_GPIO_WritePin(MEMS_POWER_GPIO_Port, MEMS_POWER_Pin, GPIO_PIN_RESET)
|
||||
#define POWER_ON HAL_GPIO_WritePin(MEMS_POWER_GPIO_Port, MEMS_POWER_Pin, GPIO_PIN_SET)
|
||||
#define TOF250_I2C_ADDR (0x52<<1)
|
||||
|
||||
#if defined(STM32WLE5xx) || defined(STM32WL55xx)
|
||||
|
|
@ -131,70 +132,70 @@ void MX_TOF_Init(void);
|
|||
/* | | | */
|
||||
/* | TOF-2 | TOF-1 | */
|
||||
/* -------------------- | ------------------ | */
|
||||
/* U4, PA-9 | U3, PB-3 | */
|
||||
/* U4, PA-9 | U3, PB-5 | */
|
||||
|
||||
|
||||
/* TOF_1, U3 RIGHT CORNER, PB-3 */
|
||||
/* TOF_1, U3 RIGHT CORNER, PB-5 */
|
||||
|
||||
#if defined(TOF_1)&& defined(STM32WLE5xx)
|
||||
#define TOF_C_INT_Pin GPIO_PIN_5
|
||||
#define TOF_C_INT_GPIO_Port GPIOB
|
||||
#define TOF_C_INT_EXTI_IRQn EXTI9_5_IRQn
|
||||
#define TOF_C_XSHUT_Pin GPIO_PIN_3
|
||||
#define TOF_C_XSHUT_GPIO_Port GPIOB
|
||||
#if defined(TOF_1) //&& defined(STM32WLE5xx)
|
||||
#define TOF_C_INT_Pin GPIO_PIN_3 // 2024-04-08 WAS GPIO_PIN_5
|
||||
#define TOF_C_INT_GPIO_Port GPIOB
|
||||
#define TOF_C_INT_EXTI_IRQn EXTI3_IRQn // 2024-04-08 WAS EXTI9_5_IRQn
|
||||
#define TOF_C_XSHUT_Pin GPIO_PIN_5 // 2024-04-08 WAS GPIO_PIN_3
|
||||
#define TOF_C_XSHUT_GPIO_Port GPIOB
|
||||
#endif
|
||||
// Common Shared Int Pin and Port for VL53L0X
|
||||
|
||||
#define TOF_INT_EXTI_PIN GPIO_PIN_5 //TOF_C_INT_Pin
|
||||
#define TOF_INT_EXTI_PORT GPIOB //TOF_C_INT_GPIO_Port
|
||||
#define TOF_INT_EXTI_PIN GPIO_PIN_3 // 2024-04-08 WAS GPIO_PIN_5 //TOF_C_INT_Pin
|
||||
#define TOF_INT_EXTI_PORT GPIOB //TOF_C_INT_GPIO_Port
|
||||
|
||||
/* TOF_2, */
|
||||
#if defined(TOF_2) && defined(STM32WL55xx)
|
||||
#define TOF_L_INT_Pin GPIO_PIN_7
|
||||
#define TOF_L_INT_GPIO_Port GPIOC
|
||||
#define TOF_L_INT_EXTI_IRQn EXTI9_5_IRQn
|
||||
#define TOF_L_XSHUT_Pin GPIO_PIN_10
|
||||
#define TOF_L_XSHUT_GPIO_Port GPIOB
|
||||
#define TOF_L_INT_Pin GPIO_PIN_7
|
||||
#define TOF_L_INT_GPIO_Port GPIOC
|
||||
#define TOF_L_INT_EXTI_IRQn EXTI9_5_IRQn
|
||||
#define TOF_L_XSHUT_Pin GPIO_PIN_10
|
||||
#define TOF_L_XSHUT_GPIO_Port GPIOB
|
||||
#endif
|
||||
|
||||
|
||||
/* TOF_2, U4 LEFT CORNER, PA-9 */
|
||||
#if defined(TOF_1) && defined(STM32WLE5xx)
|
||||
#define TOF_L_INT_Pin GPIO_PIN_5
|
||||
#define TOF_L_INT_GPIO_Port GPIOB
|
||||
#define TOF_L_INT_EXTI_IRQn EXTI9_5_IRQn
|
||||
#define TOF_L_XSHUT_Pin GPIO_PIN_9
|
||||
#define TOF_L_XSHUT_GPIO_Port GPIOA
|
||||
#if defined(TOF_2) && defined(STM32WLE5xx)
|
||||
#define TOF_L_INT_Pin GPIO_PIN_3 // 2024-04-08 WAS GPIO_PIN_5
|
||||
#define TOF_L_INT_GPIO_Port GPIOB
|
||||
#define TOF_L_INT_EXTI_IRQn EXTI3_IRQn // 2024-04-08 WAS EXTI9_5_IRQn
|
||||
#define TOF_L_XSHUT_Pin GPIO_PIN_9
|
||||
#define TOF_L_XSHUT_GPIO_Port GPIOA
|
||||
#endif
|
||||
|
||||
|
||||
/* TOF_3 */
|
||||
#if defined(STM32WL55xx)&& defined(TOF_3)
|
||||
#define TOF_R_INT_Pin GPIO_PIN_10
|
||||
#define TOF_R_INT_GPIO_Port GPIOA
|
||||
#define TOF_R_INT_EXTI_IRQn EXTI15_10_IRQn
|
||||
#define TOF_R_XSHUT_Pin GPIO_PIN_5
|
||||
#define TOF_R_XSHUT_GPIO_Port GPIOB
|
||||
#define TOF_R_INT_Pin GPIO_PIN_10
|
||||
#define TOF_R_INT_GPIO_Port GPIOA
|
||||
#define TOF_R_INT_EXTI_IRQn EXTI15_10_IRQn
|
||||
#define TOF_R_XSHUT_Pin GPIO_PIN_5
|
||||
#define TOF_R_XSHUT_GPIO_Port GPIOB
|
||||
#endif
|
||||
|
||||
|
||||
/* TOF_3 */
|
||||
#if defined(STM32WLE5xx)&& defined(TOF_3)
|
||||
#define TOF_R_INT_Pin GPIO_PIN_5
|
||||
#define TOF_R_INT_GPIO_Port GPIOB
|
||||
#define TOF_R_INT_EXTI_IRQn EXTI9_5_IRQn
|
||||
#define TOF_R_XSHUT_Pin GPIO_PIN_10
|
||||
#define TOF_R_XSHUT_GPIO_Port GPIOA
|
||||
#define TOF_R_INT_Pin GPIO_PIN_3 // 2024-04-08 WAS GPIO_PIN_5
|
||||
#define TOF_R_INT_GPIO_Port GPIOB
|
||||
#define TOF_R_INT_EXTI_IRQn EXTI3_IRQn // 2024-04-08 WAS EXTI9_5_IRQn
|
||||
#define TOF_R_XSHUT_Pin GPIO_PIN_10
|
||||
#define TOF_R_XSHUT_GPIO_Port GPIOA
|
||||
#endif
|
||||
|
||||
#if defined(SOAP_LEVEL_SENSOR)
|
||||
/* IF_SOAP_IN, MEMS_IF_3, PA10 */
|
||||
#define SOAP_STATUS_Pin GPIO_PIN_10
|
||||
#define SOAP_STATUS_GPIO_Port GPIOA
|
||||
#define SOAP_STATUS_Pin GPIO_PIN_10
|
||||
#define SOAP_STATUS_GPIO_Port GPIOA
|
||||
|
||||
/* IF_SENSOR_ON_OFF, MEMS_IF_1, PB3 */
|
||||
#define SOAP_SWITCH_Pin GPIO_PIN_3
|
||||
#define SOAP_SWITCH_GPIO_Port GPIOB
|
||||
#define SOAP_SWITCH_Pin GPIO_PIN_5 // 2024-04-08 WAS GPIO_PIN_3
|
||||
#define SOAP_SWITCH_GPIO_Port GPIOB
|
||||
|
||||
#define SOAP_DATA HAL_GPIO_ReadPin(SOAP_STATUS_GPIO_Port,SOAP_STATUS_Pin)
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -79,10 +79,12 @@ void MX_DMA_Init(void)
|
|||
HAL_NVIC_SetPriority(DMA1_Channel6_IRQn, 0, 0);
|
||||
HAL_NVIC_EnableIRQ(DMA1_Channel6_IRQn);
|
||||
#endif
|
||||
#if 0
|
||||
/* DMA1_Channel7_IRQn interrupt configuration */
|
||||
HAL_NVIC_SetPriority(DMA1_Channel7_IRQn, 0, 0);
|
||||
HAL_NVIC_EnableIRQ(DMA1_Channel7_IRQn);
|
||||
// **** USART2
|
||||
#endif
|
||||
#if 0
|
||||
/* DMA2_Channel1_IRQn interrupt configuration */
|
||||
HAL_NVIC_SetPriority(DMA2_Channel1_IRQn, 0, 0);
|
||||
|
|
|
|||
|
|
@ -57,8 +57,8 @@ void MX_GPIO_Init(void)
|
|||
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
|
||||
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
|
||||
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
||||
__HAL_RCC_GPIOA_CLK_DISABLE();
|
||||
__HAL_RCC_GPIOB_CLK_DISABLE();
|
||||
//__HAL_RCC_GPIOA_CLK_DISABLE();
|
||||
//__HAL_RCC_GPIOB_CLK_DISABLE();
|
||||
__HAL_RCC_GPIOC_CLK_DISABLE();
|
||||
|
||||
/*Configure GPIO pin Output Level */
|
||||
|
|
@ -91,7 +91,7 @@ void MX_GPIO_Init(void)
|
|||
GPIO_InitStruct.Pull = GPIO_PULLUP;
|
||||
HAL_GPIO_Init(BUT3_GPIO_Port, &GPIO_InitStruct);
|
||||
#endif
|
||||
|
||||
#if 0
|
||||
/*Configure GPIO pin : PtPin */
|
||||
GPIO_InitStruct.Pin = BUT2_Pin;
|
||||
#ifdef TOF_2
|
||||
|
|
@ -108,7 +108,7 @@ void MX_GPIO_Init(void)
|
|||
GPIO_InitStruct.Mode = GPIO_MODE_IT_FALLING;
|
||||
GPIO_InitStruct.Pull = GPIO_PULLUP;
|
||||
HAL_GPIO_Init(BUT1_GPIO_Port, &GPIO_InitStruct);
|
||||
|
||||
#endif
|
||||
__HAL_RCC_GPIOB_CLK_ENABLE();
|
||||
/*Configure GPIO pins : TOF_C_INT_Pin */
|
||||
#if defined(TOF_1)
|
||||
|
|
@ -194,13 +194,14 @@ HAL_GPIO_Init(SOAP_SWITCH_GPIO_Port, &GPIO_InitStruct);
|
|||
/* ============== SOAP LEVEL DETECTION ========================= */
|
||||
#endif
|
||||
|
||||
|
||||
#if 0
|
||||
/* EXTI interrupt init*/
|
||||
HAL_NVIC_SetPriority(EXTI0_IRQn, 0, 0);
|
||||
HAL_NVIC_EnableIRQ(EXTI0_IRQn);
|
||||
|
||||
HAL_NVIC_SetPriority(EXTI1_IRQn, 0, 0);
|
||||
HAL_NVIC_EnableIRQ(EXTI1_IRQn);
|
||||
#endif
|
||||
#if defined(TOF_1)
|
||||
HAL_NVIC_SetPriority(TOF_C_INT_EXTI_IRQn, 0, 0);
|
||||
HAL_NVIC_EnableIRQ(TOF_C_INT_EXTI_IRQn);
|
||||
|
|
|
|||
|
|
@ -91,6 +91,12 @@ void PWR_EnterOffMode(void)
|
|||
//LL_PWR_ClearFlag_WU();
|
||||
HAL_PWR_EnterSTANDBYMode();
|
||||
#endif
|
||||
POWER_OFF;
|
||||
//HAL_UART_DeInit(&huart2);
|
||||
//vcom_DeInit();
|
||||
HAL_GPIO_DeInit(GPIOA,GPIO_PIN_All);
|
||||
HAL_GPIO_DeInit(GPIOB,GPIO_PIN_All);
|
||||
HAL_GPIO_DeInit(GPIOC,GPIO_PIN_All);
|
||||
HAL_SuspendTick();
|
||||
HAL_PWR_EnterSTANDBYMode();
|
||||
#if 0
|
||||
|
|
@ -111,6 +117,7 @@ void PWR_ExitOffMode(void)
|
|||
{
|
||||
/* USER CODE BEGIN ExitOffMode_1 */
|
||||
#if 1
|
||||
POWER_ON;
|
||||
HAL_ResumeTick();
|
||||
//__HAL_PWR_CLEAR_FLAG(PWR_FLAG_SB);
|
||||
//HAL_GPIO_WritePin(GPIOB, GPIO_PIN_2, GPIO_PIN_SET); /* LED ON */
|
||||
|
|
@ -128,8 +135,9 @@ void PWR_ExitOffMode(void)
|
|||
void PWR_EnterStopMode(void)
|
||||
{
|
||||
/* USER CODE BEGIN EnterStopMode_1 */
|
||||
HAL_UART_DeInit(&huart2);
|
||||
vcom_DeInit();
|
||||
POWER_OFF;
|
||||
//HAL_UART_DeInit(&huart2);
|
||||
//vcom_DeInit();
|
||||
HAL_GPIO_DeInit(GPIOA,GPIO_PIN_All);
|
||||
HAL_GPIO_DeInit(GPIOB,GPIO_PIN_All);
|
||||
HAL_GPIO_DeInit(GPIOC,GPIO_PIN_All);
|
||||
|
|
@ -153,7 +161,9 @@ void PWR_ExitStopMode(void)
|
|||
|
||||
/* USER CODE END ExitStopMode_1 */
|
||||
/* Resume sysTick : work around for debugger problem in dual core */
|
||||
|
||||
HAL_ResumeTick();
|
||||
POWER_ON;
|
||||
/*Not retained periph:
|
||||
ADC interface
|
||||
DAC interface USARTx, TIMx, i2Cx, SPIx
|
||||
|
|
|
|||
|
|
@ -234,7 +234,7 @@ void TAMP_STAMP_LSECSS_SSRU_IRQHandler(void)
|
|||
|
||||
/* USER CODE END TAMP_STAMP_LSECSS_SSRU_IRQn 1 */
|
||||
}
|
||||
|
||||
#if 0
|
||||
/**
|
||||
* @brief This function handles EXTI Line 0 Interrupt.
|
||||
*/
|
||||
|
|
@ -249,7 +249,8 @@ void EXTI0_IRQHandler(void)
|
|||
|
||||
/* USER CODE END EXTI0_IRQn 1 */
|
||||
}
|
||||
|
||||
#endif
|
||||
#if 0
|
||||
/**
|
||||
* @brief This function handles EXTI Line 1 Interrupt.
|
||||
*/
|
||||
|
|
@ -263,7 +264,7 @@ void EXTI1_IRQHandler(void)
|
|||
|
||||
/* USER CODE END EXTI1_IRQn 1 */
|
||||
}
|
||||
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief This function handles DMA1 Channel 2 Interrupt.
|
||||
|
|
@ -342,6 +343,7 @@ void DMA1_Channel6_IRQHandler(void)
|
|||
/* USER CODE END DMA1_Channel6_IRQn 1 */
|
||||
}
|
||||
#endif
|
||||
#if 0
|
||||
/**
|
||||
* @brief This function handles DMA1 Channel 7 Interrupt.
|
||||
*/
|
||||
|
|
@ -355,6 +357,19 @@ void DMA1_Channel7_IRQHandler(void)
|
|||
|
||||
/* USER CODE END DMA1_Channel7_IRQn 1 */
|
||||
}
|
||||
#endif
|
||||
void EXTI3_IRQHandler(void)
|
||||
{
|
||||
/* USER CODE BEGIN EXTI3_IRQn 0 */
|
||||
|
||||
/* USER CODE END EXTI3_IRQn 0 */
|
||||
#ifdef STM32WLE5xx
|
||||
HAL_GPIO_EXTI_IRQHandler(TOF_INT_EXTI_PIN);
|
||||
#endif
|
||||
/* USER CODE BEGIN EXTI3_IRQn 1 */
|
||||
|
||||
/* USER CODE END EXTI3_IRQn 1 */
|
||||
}
|
||||
|
||||
#if 0
|
||||
/**
|
||||
|
|
@ -371,7 +386,7 @@ void EXTI4_IRQHandler(void)
|
|||
/* USER CODE END EXTI9_5_IRQn 1 */
|
||||
}
|
||||
#endif
|
||||
|
||||
#if 0
|
||||
/**
|
||||
* @brief This function handles EXTI Lines [9:5] Interrupt.
|
||||
*/
|
||||
|
|
@ -391,7 +406,8 @@ void EXTI9_5_IRQHandler(void)
|
|||
|
||||
/* USER CODE END EXTI9_5_IRQn 1 */
|
||||
}
|
||||
|
||||
#endif
|
||||
#if 0
|
||||
/**
|
||||
* @brief This function handles EXTI Lines [9:5] Interrupt.
|
||||
*/
|
||||
|
|
@ -407,9 +423,9 @@ void EXTI15_10_IRQHandler(void)
|
|||
|
||||
/* USER CODE END EXTI15_10_IRQn 1 */
|
||||
}
|
||||
#endif
|
||||
|
||||
|
||||
|
||||
#if 0
|
||||
/**
|
||||
* @brief This function handles USART2 Interrupt.
|
||||
*/
|
||||
|
|
@ -423,7 +439,7 @@ void USART2_IRQHandler(void)
|
|||
|
||||
/* USER CODE END USART2_IRQn 1 */
|
||||
}
|
||||
|
||||
#endif
|
||||
/**
|
||||
* @brief This function handles RTC Alarms (A and B) Interrupt.
|
||||
*/
|
||||
|
|
|
|||
|
|
@ -123,7 +123,7 @@ void SystemApp_Init(void)
|
|||
UTIL_LPM_Init();
|
||||
/* Disable Stand-by mode */
|
||||
UTIL_LPM_SetOffMode((1 << CFG_LPM_APPLI_Id), UTIL_LPM_DISABLE);
|
||||
UTIL_LPM_SetOffMode((1 << CFG_LPM_UART_TX_Id), UTIL_LPM_ENABLE);
|
||||
//UTIL_LPM_SetOffMode((1 << CFG_LPM_UART_TX_Id), UTIL_LPM_ENABLE);
|
||||
|
||||
#if defined (LOW_POWER_DISABLE) && (LOW_POWER_DISABLE == 1)
|
||||
/* Disable Stop Mode */
|
||||
|
|
|
|||
|
|
@ -128,7 +128,7 @@ UTIL_ADV_TRACE_Status_t vcom_DeInit(void)
|
|||
|
||||
/* ##-3- Disable the NVIC for DMA ########################################### */
|
||||
/* USER CODE BEGIN 1 */
|
||||
HAL_NVIC_DisableIRQ(DMA1_Channel5_IRQn);
|
||||
HAL_NVIC_DisableIRQ(DMA1_Channel7_IRQn);
|
||||
|
||||
return UTIL_ADV_TRACE_OK;
|
||||
/* USER CODE END 1 */
|
||||
|
|
|
|||
|
|
@ -5,7 +5,7 @@
|
|||
<provider copy-of="extension" id="org.eclipse.cdt.ui.UserLanguageSettingsProvider"/>
|
||||
<provider-reference id="org.eclipse.cdt.core.ReferencedProjectsLanguageSettingsProvider" ref="shared-provider"/>
|
||||
<provider-reference id="org.eclipse.cdt.managedbuilder.core.MBSLanguageSettingsProvider" ref="shared-provider"/>
|
||||
<provider class="com.st.stm32cube.ide.mcu.toolchain.armnone.setup.CrossBuiltinSpecsDetector" console="false" env-hash="1553454923168292746" id="com.st.stm32cube.ide.mcu.toolchain.armnone.setup.CrossBuiltinSpecsDetector" keep-relative-paths="false" name="MCU ARM GCC Built-in Compiler Settings" parameter="${COMMAND} ${FLAGS} -E -P -v -dD "${INPUTS}"" prefer-non-shared="true">
|
||||
<provider class="com.st.stm32cube.ide.mcu.toolchain.armnone.setup.CrossBuiltinSpecsDetector" console="false" env-hash="-877539789554811708" id="com.st.stm32cube.ide.mcu.toolchain.armnone.setup.CrossBuiltinSpecsDetector" keep-relative-paths="false" name="MCU ARM GCC Built-in Compiler Settings" parameter="${COMMAND} ${FLAGS} -E -P -v -dD "${INPUTS}"" prefer-non-shared="true">
|
||||
<language-scope id="org.eclipse.cdt.core.gcc"/>
|
||||
<language-scope id="org.eclipse.cdt.core.g++"/>
|
||||
</provider>
|
||||
|
|
@ -16,7 +16,7 @@
|
|||
<provider copy-of="extension" id="org.eclipse.cdt.ui.UserLanguageSettingsProvider"/>
|
||||
<provider-reference id="org.eclipse.cdt.core.ReferencedProjectsLanguageSettingsProvider" ref="shared-provider"/>
|
||||
<provider-reference id="org.eclipse.cdt.managedbuilder.core.MBSLanguageSettingsProvider" ref="shared-provider"/>
|
||||
<provider class="com.st.stm32cube.ide.mcu.toolchain.armnone.setup.CrossBuiltinSpecsDetector" console="false" env-hash="1553454923168292746" id="com.st.stm32cube.ide.mcu.toolchain.armnone.setup.CrossBuiltinSpecsDetector" keep-relative-paths="false" name="MCU ARM GCC Built-in Compiler Settings" parameter="${COMMAND} ${FLAGS} -E -P -v -dD "${INPUTS}"" prefer-non-shared="true">
|
||||
<provider class="com.st.stm32cube.ide.mcu.toolchain.armnone.setup.CrossBuiltinSpecsDetector" console="false" env-hash="-877539789554811708" id="com.st.stm32cube.ide.mcu.toolchain.armnone.setup.CrossBuiltinSpecsDetector" keep-relative-paths="false" name="MCU ARM GCC Built-in Compiler Settings" parameter="${COMMAND} ${FLAGS} -E -P -v -dD "${INPUTS}"" prefer-non-shared="true">
|
||||
<language-scope id="org.eclipse.cdt.core.gcc"/>
|
||||
<language-scope id="org.eclipse.cdt.core.g++"/>
|
||||
</provider>
|
||||
|
|
|
|||
|
|
@ -1,3 +1,4 @@
|
|||
8DF89ED150041C4CBC7CB9A9CAA90856=1E8F1D9EDF5EB0F4ACFD485842648E9C
|
||||
DC22A860405A8BF2F2C095E5B6529F12=EAC6FC6468FD9889D03DF8A29B68CCA9
|
||||
2F62501ED4689FB349E356AB974DBE57=A6EBE0E84BEC4DB205A3B0632707E4E0
|
||||
8DF89ED150041C4CBC7CB9A9CAA90856=A6EBE0E84BEC4DB205A3B0632707E4E0
|
||||
DC22A860405A8BF2F2C095E5B6529F12=74CD6EB106FB50B767E4FE71225C7638
|
||||
eclipse.preferences.version=1
|
||||
|
|
|
|||
|
|
@ -1,9 +1,9 @@
|
|||
################################################################################
|
||||
# 自动生成的文件。不要编辑！
|
||||
# Toolchain: GNU Tools for STM32 (11.3.rel1)
|
||||
# Automatically-generated file. Do not edit!
|
||||
# Toolchain: GNU Tools for STM32 (12.3.rel1)
|
||||
################################################################################
|
||||
|
||||
# 将这些工具调用的输入和输出添加到构建变量
|
||||
# Add inputs and outputs from these tool invocations to the build variables
|
||||
C_SRCS += \
|
||||
D:/ONEDRIVE/STM32WLV13/Projects/NUCLEO-WL55JC/Applications/LoRaWAN/STS_RR_R125/Core/Src/adc.c \
|
||||
D:/ONEDRIVE/STM32WLV13/Projects/NUCLEO-WL55JC/Applications/LoRaWAN/STS_RR_R125/Core/Src/adc_if.c \
|
||||
|
|
@ -80,7 +80,7 @@ C_DEPS += \
|
|||
./Application/User/Core/yunhorn_sts_process.d
|
||||
|
||||
|
||||
# 每个子目录必须为构建它所贡献的源提供规则
|
||||
# Each subdirectory must supply rules for building sources it contributes
|
||||
Application/User/Core/adc.o: D:/ONEDRIVE/STM32WLV13/Projects/NUCLEO-WL55JC/Applications/LoRaWAN/STS_RR_R125/Core/Src/adc.c Application/User/Core/subdir.mk
|
||||
arm-none-eabi-gcc "$<" -mcpu=cortex-m4 -std=gnu11 -DCORE_CM4 -DYUNHORN_STS_RANDOM -DTOF_1 -DTOF_2 -DSTS_R1D -DSTM32WLE5xx -DUSE_HAL_DRIVER -c -I../../Core/Inc -I../../vl53l0x -I../../TOF/App -I../../TOF/Target -I../../LoRaWAN/App -I../../LoRaWAN/Target -I../../../../../../../Drivers/STM32WLxx_HAL_Driver/Inc -I../../../../../../../Drivers/STM32WLxx_HAL_Driver/Inc/Legacy -I../../../../../../../Utilities/trace/adv_trace -I../../../../../../../Utilities/misc -I../../../../../../../Utilities/sequencer -I../../../../../../../Utilities/timer -I../../../../../../../Utilities/lpm/tiny_lpm -I../../../../../../../Middlewares/Third_Party/LoRaWAN/LmHandler/Packages -I../../../../../../../Drivers/CMSIS/Device/ST/STM32WLxx/Include -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Crypto -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Mac/Region -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Mac -I../../../../../../../Middlewares/Third_Party/LoRaWAN/LmHandler -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Utilities -I../../../../../../../Middlewares/Third_Party/SubGHz_Phy -I../../../../../../../Middlewares/ST/STM32_Cryptographic/include -I../../../../../../../Middlewares/Third_Party/SubGHz_Phy/stm32_radio_driver -I../../../../../../../Drivers/CMSIS/Include -I../../../../../../../Drivers/BSP/STM32WLxx_Nucleo -Os -ffunction-sections -fdata-sections -Wall -fstack-usage -fcyclomatic-complexity -MMD -MP -MF"$(@:%.o=%.d)" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@"
|
||||
Application/User/Core/adc_if.o: D:/ONEDRIVE/STM32WLV13/Projects/NUCLEO-WL55JC/Applications/LoRaWAN/STS_RR_R125/Core/Src/adc_if.c Application/User/Core/subdir.mk
|
||||
|
|
|
|||
|
|
@ -1,9 +1,9 @@
|
|||
################################################################################
|
||||
# 自动生成的文件。不要编辑！
|
||||
# Toolchain: GNU Tools for STM32 (11.3.rel1)
|
||||
# Automatically-generated file. Do not edit!
|
||||
# Toolchain: GNU Tools for STM32 (12.3.rel1)
|
||||
################################################################################
|
||||
|
||||
# 将这些工具调用的输入和输出添加到构建变量
|
||||
# Add inputs and outputs from these tool invocations to the build variables
|
||||
C_SRCS += \
|
||||
D:/ONEDRIVE/STM32WLV13/Projects/NUCLEO-WL55JC/Applications/LoRaWAN/STS_RR_R125/LoRaWAN/App/CayenneLpp.c \
|
||||
D:/ONEDRIVE/STM32WLV13/Projects/NUCLEO-WL55JC/Applications/LoRaWAN/STS_RR_R125/LoRaWAN/App/app_lorawan.c \
|
||||
|
|
@ -23,7 +23,7 @@ C_DEPS += \
|
|||
./Application/User/LoRaWAN/App/lora_info.d
|
||||
|
||||
|
||||
# 每个子目录必须为构建它所贡献的源提供规则
|
||||
# Each subdirectory must supply rules for building sources it contributes
|
||||
Application/User/LoRaWAN/App/CayenneLpp.o: D:/ONEDRIVE/STM32WLV13/Projects/NUCLEO-WL55JC/Applications/LoRaWAN/STS_RR_R125/LoRaWAN/App/CayenneLpp.c Application/User/LoRaWAN/App/subdir.mk
|
||||
arm-none-eabi-gcc "$<" -mcpu=cortex-m4 -std=gnu11 -DCORE_CM4 -DYUNHORN_STS_RANDOM -DTOF_1 -DTOF_2 -DSTS_R1D -DSTM32WLE5xx -DUSE_HAL_DRIVER -c -I../../Core/Inc -I../../vl53l0x -I../../TOF/App -I../../TOF/Target -I../../LoRaWAN/App -I../../LoRaWAN/Target -I../../../../../../../Drivers/STM32WLxx_HAL_Driver/Inc -I../../../../../../../Drivers/STM32WLxx_HAL_Driver/Inc/Legacy -I../../../../../../../Utilities/trace/adv_trace -I../../../../../../../Utilities/misc -I../../../../../../../Utilities/sequencer -I../../../../../../../Utilities/timer -I../../../../../../../Utilities/lpm/tiny_lpm -I../../../../../../../Middlewares/Third_Party/LoRaWAN/LmHandler/Packages -I../../../../../../../Drivers/CMSIS/Device/ST/STM32WLxx/Include -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Crypto -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Mac/Region -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Mac -I../../../../../../../Middlewares/Third_Party/LoRaWAN/LmHandler -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Utilities -I../../../../../../../Middlewares/Third_Party/SubGHz_Phy -I../../../../../../../Middlewares/ST/STM32_Cryptographic/include -I../../../../../../../Middlewares/Third_Party/SubGHz_Phy/stm32_radio_driver -I../../../../../../../Drivers/CMSIS/Include -I../../../../../../../Drivers/BSP/STM32WLxx_Nucleo -Os -ffunction-sections -fdata-sections -Wall -fstack-usage -fcyclomatic-complexity -MMD -MP -MF"$(@:%.o=%.d)" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@"
|
||||
Application/User/LoRaWAN/App/app_lorawan.o: D:/ONEDRIVE/STM32WLV13/Projects/NUCLEO-WL55JC/Applications/LoRaWAN/STS_RR_R125/LoRaWAN/App/app_lorawan.c Application/User/LoRaWAN/App/subdir.mk
|
||||
|
|
|
|||
|
|
@ -1,9 +1,9 @@
|
|||
################################################################################
|
||||
# 自动生成的文件。不要编辑！
|
||||
# Toolchain: GNU Tools for STM32 (11.3.rel1)
|
||||
# Automatically-generated file. Do not edit!
|
||||
# Toolchain: GNU Tools for STM32 (12.3.rel1)
|
||||
################################################################################
|
||||
|
||||
# 将这些工具调用的输入和输出添加到构建变量
|
||||
# Add inputs and outputs from these tool invocations to the build variables
|
||||
C_SRCS += \
|
||||
D:/ONEDRIVE/STM32WLV13/Projects/NUCLEO-WL55JC/Applications/LoRaWAN/STS_RR_R125/LoRaWAN/Target/radio_board_if.c
|
||||
|
||||
|
|
@ -14,7 +14,7 @@ C_DEPS += \
|
|||
./Application/User/LoRaWAN/Target/radio_board_if.d
|
||||
|
||||
|
||||
# 每个子目录必须为构建它所贡献的源提供规则
|
||||
# Each subdirectory must supply rules for building sources it contributes
|
||||
Application/User/LoRaWAN/Target/radio_board_if.o: D:/ONEDRIVE/STM32WLV13/Projects/NUCLEO-WL55JC/Applications/LoRaWAN/STS_RR_R125/LoRaWAN/Target/radio_board_if.c Application/User/LoRaWAN/Target/subdir.mk
|
||||
arm-none-eabi-gcc "$<" -mcpu=cortex-m4 -std=gnu11 -DCORE_CM4 -DYUNHORN_STS_RANDOM -DTOF_1 -DTOF_2 -DSTS_R1D -DSTM32WLE5xx -DUSE_HAL_DRIVER -c -I../../Core/Inc -I../../vl53l0x -I../../TOF/App -I../../TOF/Target -I../../LoRaWAN/App -I../../LoRaWAN/Target -I../../../../../../../Drivers/STM32WLxx_HAL_Driver/Inc -I../../../../../../../Drivers/STM32WLxx_HAL_Driver/Inc/Legacy -I../../../../../../../Utilities/trace/adv_trace -I../../../../../../../Utilities/misc -I../../../../../../../Utilities/sequencer -I../../../../../../../Utilities/timer -I../../../../../../../Utilities/lpm/tiny_lpm -I../../../../../../../Middlewares/Third_Party/LoRaWAN/LmHandler/Packages -I../../../../../../../Drivers/CMSIS/Device/ST/STM32WLxx/Include -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Crypto -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Mac/Region -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Mac -I../../../../../../../Middlewares/Third_Party/LoRaWAN/LmHandler -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Utilities -I../../../../../../../Middlewares/Third_Party/SubGHz_Phy -I../../../../../../../Middlewares/ST/STM32_Cryptographic/include -I../../../../../../../Middlewares/Third_Party/SubGHz_Phy/stm32_radio_driver -I../../../../../../../Drivers/CMSIS/Include -I../../../../../../../Drivers/BSP/STM32WLxx_Nucleo -Os -ffunction-sections -fdata-sections -Wall -fstack-usage -fcyclomatic-complexity -MMD -MP -MF"$(@:%.o=%.d)" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@"
|
||||
|
||||
|
|
|
|||
|
|
@ -1,9 +1,9 @@
|
|||
################################################################################
|
||||
# 自动生成的文件。不要编辑！
|
||||
# Toolchain: GNU Tools for STM32 (11.3.rel1)
|
||||
# Automatically-generated file. Do not edit!
|
||||
# Toolchain: GNU Tools for STM32 (12.3.rel1)
|
||||
################################################################################
|
||||
|
||||
# 将这些工具调用的输入和输出添加到构建变量
|
||||
# Add inputs and outputs from these tool invocations to the build variables
|
||||
S_SRCS += \
|
||||
../Application/User/Startup/startup_stm32wle5ccux.s
|
||||
|
||||
|
|
@ -14,7 +14,7 @@ S_DEPS += \
|
|||
./Application/User/Startup/startup_stm32wle5ccux.d
|
||||
|
||||
|
||||
# 每个子目录必须为构建它所贡献的源提供规则
|
||||
# Each subdirectory must supply rules for building sources it contributes
|
||||
Application/User/Startup/%.o: ../Application/User/Startup/%.s Application/User/Startup/subdir.mk
|
||||
arm-none-eabi-gcc -mcpu=cortex-m4 -c -x assembler-with-cpp -MMD -MP -MF"$(@:%.o=%.d)" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@" "$<"
|
||||
|
||||
|
|
|
|||
|
|
@ -1,9 +1,9 @@
|
|||
################################################################################
|
||||
# 自动生成的文件。不要编辑！
|
||||
# Toolchain: GNU Tools for STM32 (11.3.rel1)
|
||||
# Automatically-generated file. Do not edit!
|
||||
# Toolchain: GNU Tools for STM32 (12.3.rel1)
|
||||
################################################################################
|
||||
|
||||
# 将这些工具调用的输入和输出添加到构建变量
|
||||
# Add inputs and outputs from these tool invocations to the build variables
|
||||
C_SRCS += \
|
||||
D:/ONEDRIVE/STM32WLV13/Projects/NUCLEO-WL55JC/Applications/LoRaWAN/STS_RR_R125/TOF/App/X-WL55_WLE5_53L0X.c \
|
||||
D:/ONEDRIVE/STM32WLV13/Projects/NUCLEO-WL55JC/Applications/LoRaWAN/STS_RR_R125/TOF/App/app_tof.c \
|
||||
|
|
@ -20,7 +20,7 @@ C_DEPS += \
|
|||
./Application/User/TOF/App/app_tof_vl53l0x_range.d
|
||||
|
||||
|
||||
# 每个子目录必须为构建它所贡献的源提供规则
|
||||
# Each subdirectory must supply rules for building sources it contributes
|
||||
Application/User/TOF/App/X-WL55_WLE5_53L0X.o: D:/ONEDRIVE/STM32WLV13/Projects/NUCLEO-WL55JC/Applications/LoRaWAN/STS_RR_R125/TOF/App/X-WL55_WLE5_53L0X.c Application/User/TOF/App/subdir.mk
|
||||
arm-none-eabi-gcc "$<" -mcpu=cortex-m4 -std=gnu11 -DCORE_CM4 -DYUNHORN_STS_RANDOM -DTOF_1 -DTOF_2 -DSTS_R1D -DSTM32WLE5xx -DUSE_HAL_DRIVER -c -I../../Core/Inc -I../../vl53l0x -I../../TOF/App -I../../TOF/Target -I../../LoRaWAN/App -I../../LoRaWAN/Target -I../../../../../../../Drivers/STM32WLxx_HAL_Driver/Inc -I../../../../../../../Drivers/STM32WLxx_HAL_Driver/Inc/Legacy -I../../../../../../../Utilities/trace/adv_trace -I../../../../../../../Utilities/misc -I../../../../../../../Utilities/sequencer -I../../../../../../../Utilities/timer -I../../../../../../../Utilities/lpm/tiny_lpm -I../../../../../../../Middlewares/Third_Party/LoRaWAN/LmHandler/Packages -I../../../../../../../Drivers/CMSIS/Device/ST/STM32WLxx/Include -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Crypto -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Mac/Region -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Mac -I../../../../../../../Middlewares/Third_Party/LoRaWAN/LmHandler -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Utilities -I../../../../../../../Middlewares/Third_Party/SubGHz_Phy -I../../../../../../../Middlewares/ST/STM32_Cryptographic/include -I../../../../../../../Middlewares/Third_Party/SubGHz_Phy/stm32_radio_driver -I../../../../../../../Drivers/CMSIS/Include -I../../../../../../../Drivers/BSP/STM32WLxx_Nucleo -Os -ffunction-sections -fdata-sections -Wall -fstack-usage -fcyclomatic-complexity -MMD -MP -MF"$(@:%.o=%.d)" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@"
|
||||
Application/User/TOF/App/app_tof.o: D:/ONEDRIVE/STM32WLV13/Projects/NUCLEO-WL55JC/Applications/LoRaWAN/STS_RR_R125/TOF/App/app_tof.c Application/User/TOF/App/subdir.mk
|
||||
|
|
|
|||
|
|
@ -1,9 +1,9 @@
|
|||
################################################################################
|
||||
# 自动生成的文件。不要编辑！
|
||||
# Toolchain: GNU Tools for STM32 (11.3.rel1)
|
||||
# Automatically-generated file. Do not edit!
|
||||
# Toolchain: GNU Tools for STM32 (12.3.rel1)
|
||||
################################################################################
|
||||
|
||||
# 将这些工具调用的输入和输出添加到构建变量
|
||||
# Add inputs and outputs from these tool invocations to the build variables
|
||||
C_SRCS += \
|
||||
D:/ONEDRIVE/STM32WLV13/Projects/NUCLEO-WL55JC/Applications/LoRaWAN/STS_RR_R125/TOF/Target/app_tof_pin_conf.c
|
||||
|
||||
|
|
@ -14,7 +14,7 @@ C_DEPS += \
|
|||
./Application/User/TOF/Target/app_tof_pin_conf.d
|
||||
|
||||
|
||||
# 每个子目录必须为构建它所贡献的源提供规则
|
||||
# Each subdirectory must supply rules for building sources it contributes
|
||||
Application/User/TOF/Target/app_tof_pin_conf.o: D:/ONEDRIVE/STM32WLV13/Projects/NUCLEO-WL55JC/Applications/LoRaWAN/STS_RR_R125/TOF/Target/app_tof_pin_conf.c Application/User/TOF/Target/subdir.mk
|
||||
arm-none-eabi-gcc "$<" -mcpu=cortex-m4 -std=gnu11 -DCORE_CM4 -DYUNHORN_STS_RANDOM -DTOF_1 -DTOF_2 -DSTS_R1D -DSTM32WLE5xx -DUSE_HAL_DRIVER -c -I../../Core/Inc -I../../vl53l0x -I../../TOF/App -I../../TOF/Target -I../../LoRaWAN/App -I../../LoRaWAN/Target -I../../../../../../../Drivers/STM32WLxx_HAL_Driver/Inc -I../../../../../../../Drivers/STM32WLxx_HAL_Driver/Inc/Legacy -I../../../../../../../Utilities/trace/adv_trace -I../../../../../../../Utilities/misc -I../../../../../../../Utilities/sequencer -I../../../../../../../Utilities/timer -I../../../../../../../Utilities/lpm/tiny_lpm -I../../../../../../../Middlewares/Third_Party/LoRaWAN/LmHandler/Packages -I../../../../../../../Drivers/CMSIS/Device/ST/STM32WLxx/Include -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Crypto -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Mac/Region -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Mac -I../../../../../../../Middlewares/Third_Party/LoRaWAN/LmHandler -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Utilities -I../../../../../../../Middlewares/Third_Party/SubGHz_Phy -I../../../../../../../Middlewares/ST/STM32_Cryptographic/include -I../../../../../../../Middlewares/Third_Party/SubGHz_Phy/stm32_radio_driver -I../../../../../../../Drivers/CMSIS/Include -I../../../../../../../Drivers/BSP/STM32WLxx_Nucleo -Os -ffunction-sections -fdata-sections -Wall -fstack-usage -fcyclomatic-complexity -MMD -MP -MF"$(@:%.o=%.d)" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@"
|
||||
|
||||
|
|
|
|||
|
|
@ -1,9 +1,9 @@
|
|||
################################################################################
|
||||
# 自动生成的文件。不要编辑！
|
||||
# Toolchain: GNU Tools for STM32 (11.3.rel1)
|
||||
# Automatically-generated file. Do not edit!
|
||||
# Toolchain: GNU Tools for STM32 (12.3.rel1)
|
||||
################################################################################
|
||||
|
||||
# 将这些工具调用的输入和输出添加到构建变量
|
||||
# Add inputs and outputs from these tool invocations to the build variables
|
||||
C_SRCS += \
|
||||
D:/ONEDRIVE/STM32WLV13/Projects/NUCLEO-WL55JC/Applications/LoRaWAN/STS_RR_R125/vl53l0x/vl53l0x_api.c \
|
||||
D:/ONEDRIVE/STM32WLV13/Projects/NUCLEO-WL55JC/Applications/LoRaWAN/STS_RR_R125/vl53l0x/vl53l0x_api_calibration.c \
|
||||
|
|
@ -32,7 +32,7 @@ C_DEPS += \
|
|||
./Application/User/TOF/vl53l0x/vl53l0x_platform_log.d
|
||||
|
||||
|
||||
# 每个子目录必须为构建它所贡献的源提供规则
|
||||
# Each subdirectory must supply rules for building sources it contributes
|
||||
Application/User/TOF/vl53l0x/vl53l0x_api.o: D:/ONEDRIVE/STM32WLV13/Projects/NUCLEO-WL55JC/Applications/LoRaWAN/STS_RR_R125/vl53l0x/vl53l0x_api.c Application/User/TOF/vl53l0x/subdir.mk
|
||||
arm-none-eabi-gcc "$<" -mcpu=cortex-m4 -std=gnu11 -DCORE_CM4 -DYUNHORN_STS_RANDOM -DTOF_1 -DTOF_2 -DSTS_R1D -DSTM32WLE5xx -DUSE_HAL_DRIVER -c -I../../Core/Inc -I../../vl53l0x -I../../TOF/App -I../../TOF/Target -I../../LoRaWAN/App -I../../LoRaWAN/Target -I../../../../../../../Drivers/STM32WLxx_HAL_Driver/Inc -I../../../../../../../Drivers/STM32WLxx_HAL_Driver/Inc/Legacy -I../../../../../../../Utilities/trace/adv_trace -I../../../../../../../Utilities/misc -I../../../../../../../Utilities/sequencer -I../../../../../../../Utilities/timer -I../../../../../../../Utilities/lpm/tiny_lpm -I../../../../../../../Middlewares/Third_Party/LoRaWAN/LmHandler/Packages -I../../../../../../../Drivers/CMSIS/Device/ST/STM32WLxx/Include -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Crypto -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Mac/Region -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Mac -I../../../../../../../Middlewares/Third_Party/LoRaWAN/LmHandler -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Utilities -I../../../../../../../Middlewares/Third_Party/SubGHz_Phy -I../../../../../../../Middlewares/ST/STM32_Cryptographic/include -I../../../../../../../Middlewares/Third_Party/SubGHz_Phy/stm32_radio_driver -I../../../../../../../Drivers/CMSIS/Include -I../../../../../../../Drivers/BSP/STM32WLxx_Nucleo -Os -ffunction-sections -fdata-sections -Wall -fstack-usage -fcyclomatic-complexity -MMD -MP -MF"$(@:%.o=%.d)" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@"
|
||||
Application/User/TOF/vl53l0x/vl53l0x_api_calibration.o: D:/ONEDRIVE/STM32WLV13/Projects/NUCLEO-WL55JC/Applications/LoRaWAN/STS_RR_R125/vl53l0x/vl53l0x_api_calibration.c Application/User/TOF/vl53l0x/subdir.mk
|
||||
|
|
|
|||
|
|
@ -1,9 +1,9 @@
|
|||
################################################################################
|
||||
# 自动生成的文件。不要编辑！
|
||||
# Toolchain: GNU Tools for STM32 (11.3.rel1)
|
||||
# Automatically-generated file. Do not edit!
|
||||
# Toolchain: GNU Tools for STM32 (12.3.rel1)
|
||||
################################################################################
|
||||
|
||||
# 将这些工具调用的输入和输出添加到构建变量
|
||||
# Add inputs and outputs from these tool invocations to the build variables
|
||||
C_SRCS += \
|
||||
D:/ONEDRIVE/STM32WLV13/Drivers/BSP/STM32WLxx_Nucleo/stm32wlxx_nucleo.c \
|
||||
D:/ONEDRIVE/STM32WLV13/Drivers/BSP/STM32WLxx_Nucleo/stm32wlxx_nucleo_radio.c
|
||||
|
|
@ -17,7 +17,7 @@ C_DEPS += \
|
|||
./Drivers/BSP/STM32WLxx_Nucleo/stm32wlxx_nucleo_radio.d
|
||||
|
||||
|
||||
# 每个子目录必须为构建它所贡献的源提供规则
|
||||
# Each subdirectory must supply rules for building sources it contributes
|
||||
Drivers/BSP/STM32WLxx_Nucleo/stm32wlxx_nucleo.o: D:/ONEDRIVE/STM32WLV13/Drivers/BSP/STM32WLxx_Nucleo/stm32wlxx_nucleo.c Drivers/BSP/STM32WLxx_Nucleo/subdir.mk
|
||||
arm-none-eabi-gcc "$<" -mcpu=cortex-m4 -std=gnu11 -DCORE_CM4 -DYUNHORN_STS_RANDOM -DTOF_1 -DTOF_2 -DSTS_R1D -DSTM32WLE5xx -DUSE_HAL_DRIVER -c -I../../Core/Inc -I../../vl53l0x -I../../TOF/App -I../../TOF/Target -I../../LoRaWAN/App -I../../LoRaWAN/Target -I../../../../../../../Drivers/STM32WLxx_HAL_Driver/Inc -I../../../../../../../Drivers/STM32WLxx_HAL_Driver/Inc/Legacy -I../../../../../../../Utilities/trace/adv_trace -I../../../../../../../Utilities/misc -I../../../../../../../Utilities/sequencer -I../../../../../../../Utilities/timer -I../../../../../../../Utilities/lpm/tiny_lpm -I../../../../../../../Middlewares/Third_Party/LoRaWAN/LmHandler/Packages -I../../../../../../../Drivers/CMSIS/Device/ST/STM32WLxx/Include -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Crypto -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Mac/Region -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Mac -I../../../../../../../Middlewares/Third_Party/LoRaWAN/LmHandler -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Utilities -I../../../../../../../Middlewares/Third_Party/SubGHz_Phy -I../../../../../../../Middlewares/ST/STM32_Cryptographic/include -I../../../../../../../Middlewares/Third_Party/SubGHz_Phy/stm32_radio_driver -I../../../../../../../Drivers/CMSIS/Include -I../../../../../../../Drivers/BSP/STM32WLxx_Nucleo -Os -ffunction-sections -fdata-sections -Wall -fstack-usage -fcyclomatic-complexity -MMD -MP -MF"$(@:%.o=%.d)" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@"
|
||||
Drivers/BSP/STM32WLxx_Nucleo/stm32wlxx_nucleo_radio.o: D:/ONEDRIVE/STM32WLV13/Drivers/BSP/STM32WLxx_Nucleo/stm32wlxx_nucleo_radio.c Drivers/BSP/STM32WLxx_Nucleo/subdir.mk
|
||||
|
|
|
|||
|
|
@ -1,9 +1,9 @@
|
|||
################################################################################
|
||||
# 自动生成的文件。不要编辑！
|
||||
# Toolchain: GNU Tools for STM32 (11.3.rel1)
|
||||
# Automatically-generated file. Do not edit!
|
||||
# Toolchain: GNU Tools for STM32 (12.3.rel1)
|
||||
################################################################################
|
||||
|
||||
# 将这些工具调用的输入和输出添加到构建变量
|
||||
# Add inputs and outputs from these tool invocations to the build variables
|
||||
C_SRCS += \
|
||||
D:/ONEDRIVE/STM32WLV13/Projects/NUCLEO-WL55JC/Applications/LoRaWAN/STS_RR_R125/Core/Src/system_stm32wlxx.c
|
||||
|
||||
|
|
@ -14,7 +14,7 @@ C_DEPS += \
|
|||
./Drivers/CMSIS/system_stm32wlxx.d
|
||||
|
||||
|
||||
# 每个子目录必须为构建它所贡献的源提供规则
|
||||
# Each subdirectory must supply rules for building sources it contributes
|
||||
Drivers/CMSIS/system_stm32wlxx.o: D:/ONEDRIVE/STM32WLV13/Projects/NUCLEO-WL55JC/Applications/LoRaWAN/STS_RR_R125/Core/Src/system_stm32wlxx.c Drivers/CMSIS/subdir.mk
|
||||
arm-none-eabi-gcc "$<" -mcpu=cortex-m4 -std=gnu11 -DCORE_CM4 -DYUNHORN_STS_RANDOM -DTOF_1 -DTOF_2 -DSTS_R1D -DSTM32WLE5xx -DUSE_HAL_DRIVER -c -I../../Core/Inc -I../../vl53l0x -I../../TOF/App -I../../TOF/Target -I../../LoRaWAN/App -I../../LoRaWAN/Target -I../../../../../../../Drivers/STM32WLxx_HAL_Driver/Inc -I../../../../../../../Drivers/STM32WLxx_HAL_Driver/Inc/Legacy -I../../../../../../../Utilities/trace/adv_trace -I../../../../../../../Utilities/misc -I../../../../../../../Utilities/sequencer -I../../../../../../../Utilities/timer -I../../../../../../../Utilities/lpm/tiny_lpm -I../../../../../../../Middlewares/Third_Party/LoRaWAN/LmHandler/Packages -I../../../../../../../Drivers/CMSIS/Device/ST/STM32WLxx/Include -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Crypto -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Mac/Region -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Mac -I../../../../../../../Middlewares/Third_Party/LoRaWAN/LmHandler -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Utilities -I../../../../../../../Middlewares/Third_Party/SubGHz_Phy -I../../../../../../../Middlewares/ST/STM32_Cryptographic/include -I../../../../../../../Middlewares/Third_Party/SubGHz_Phy/stm32_radio_driver -I../../../../../../../Drivers/CMSIS/Include -I../../../../../../../Drivers/BSP/STM32WLxx_Nucleo -Os -ffunction-sections -fdata-sections -Wall -fstack-usage -fcyclomatic-complexity -MMD -MP -MF"$(@:%.o=%.d)" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@"
|
||||
|
||||
|
|
|
|||
|
|
@ -1,9 +1,9 @@
|
|||
################################################################################
|
||||
# 自动生成的文件。不要编辑！
|
||||
# Toolchain: GNU Tools for STM32 (11.3.rel1)
|
||||
# Automatically-generated file. Do not edit!
|
||||
# Toolchain: GNU Tools for STM32 (12.3.rel1)
|
||||
################################################################################
|
||||
|
||||
# 将这些工具调用的输入和输出添加到构建变量
|
||||
# Add inputs and outputs from these tool invocations to the build variables
|
||||
C_SRCS += \
|
||||
D:/ONEDRIVE/STM32WLV13/Drivers/STM32WLxx_HAL_Driver/Src/stm32wlxx_hal.c \
|
||||
D:/ONEDRIVE/STM32WLV13/Drivers/STM32WLxx_HAL_Driver/Src/stm32wlxx_hal_adc.c \
|
||||
|
|
@ -83,7 +83,7 @@ C_DEPS += \
|
|||
./Drivers/STM32WLxx_HAL_Driver/stm32wlxx_ll_adc.d
|
||||
|
||||
|
||||
# 每个子目录必须为构建它所贡献的源提供规则
|
||||
# Each subdirectory must supply rules for building sources it contributes
|
||||
Drivers/STM32WLxx_HAL_Driver/stm32wlxx_hal.o: D:/ONEDRIVE/STM32WLV13/Drivers/STM32WLxx_HAL_Driver/Src/stm32wlxx_hal.c Drivers/STM32WLxx_HAL_Driver/subdir.mk
|
||||
arm-none-eabi-gcc "$<" -mcpu=cortex-m4 -std=gnu11 -DCORE_CM4 -DYUNHORN_STS_RANDOM -DTOF_1 -DTOF_2 -DSTS_R1D -DSTM32WLE5xx -DUSE_HAL_DRIVER -c -I../../Core/Inc -I../../vl53l0x -I../../TOF/App -I../../TOF/Target -I../../LoRaWAN/App -I../../LoRaWAN/Target -I../../../../../../../Drivers/STM32WLxx_HAL_Driver/Inc -I../../../../../../../Drivers/STM32WLxx_HAL_Driver/Inc/Legacy -I../../../../../../../Utilities/trace/adv_trace -I../../../../../../../Utilities/misc -I../../../../../../../Utilities/sequencer -I../../../../../../../Utilities/timer -I../../../../../../../Utilities/lpm/tiny_lpm -I../../../../../../../Middlewares/Third_Party/LoRaWAN/LmHandler/Packages -I../../../../../../../Drivers/CMSIS/Device/ST/STM32WLxx/Include -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Crypto -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Mac/Region -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Mac -I../../../../../../../Middlewares/Third_Party/LoRaWAN/LmHandler -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Utilities -I../../../../../../../Middlewares/Third_Party/SubGHz_Phy -I../../../../../../../Middlewares/ST/STM32_Cryptographic/include -I../../../../../../../Middlewares/Third_Party/SubGHz_Phy/stm32_radio_driver -I../../../../../../../Drivers/CMSIS/Include -I../../../../../../../Drivers/BSP/STM32WLxx_Nucleo -Os -ffunction-sections -fdata-sections -Wall -fstack-usage -fcyclomatic-complexity -MMD -MP -MF"$(@:%.o=%.d)" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@"
|
||||
Drivers/STM32WLxx_HAL_Driver/stm32wlxx_hal_adc.o: D:/ONEDRIVE/STM32WLV13/Drivers/STM32WLxx_HAL_Driver/Src/stm32wlxx_hal_adc.c Drivers/STM32WLxx_HAL_Driver/subdir.mk
|
||||
|
|
|
|||
|
|
@ -1,9 +1,9 @@
|
|||
################################################################################
|
||||
# 自动生成的文件。不要编辑！
|
||||
# Toolchain: GNU Tools for STM32 (11.3.rel1)
|
||||
# Automatically-generated file. Do not edit!
|
||||
# Toolchain: GNU Tools for STM32 (12.3.rel1)
|
||||
################################################################################
|
||||
|
||||
# 将这些工具调用的输入和输出添加到构建变量
|
||||
# Add inputs and outputs from these tool invocations to the build variables
|
||||
C_SRCS += \
|
||||
D:/ONEDRIVE/STM32WLV13/Middlewares/Third_Party/LoRaWAN/LmHandler/LmHandler.c \
|
||||
D:/ONEDRIVE/STM32WLV13/Middlewares/Third_Party/LoRaWAN/LmHandler/Packages/LmhpCompliance.c \
|
||||
|
|
@ -110,7 +110,7 @@ C_DEPS += \
|
|||
./Middlewares/LoRaWAN/utilities.d
|
||||
|
||||
|
||||
# 每个子目录必须为构建它所贡献的源提供规则
|
||||
# Each subdirectory must supply rules for building sources it contributes
|
||||
Middlewares/LoRaWAN/LmHandler.o: D:/ONEDRIVE/STM32WLV13/Middlewares/Third_Party/LoRaWAN/LmHandler/LmHandler.c Middlewares/LoRaWAN/subdir.mk
|
||||
arm-none-eabi-gcc "$<" -mcpu=cortex-m4 -std=gnu11 -DCORE_CM4 -DYUNHORN_STS_RANDOM -DTOF_1 -DTOF_2 -DSTS_R1D -DSTM32WLE5xx -DUSE_HAL_DRIVER -c -I../../Core/Inc -I../../vl53l0x -I../../TOF/App -I../../TOF/Target -I../../LoRaWAN/App -I../../LoRaWAN/Target -I../../../../../../../Drivers/STM32WLxx_HAL_Driver/Inc -I../../../../../../../Drivers/STM32WLxx_HAL_Driver/Inc/Legacy -I../../../../../../../Utilities/trace/adv_trace -I../../../../../../../Utilities/misc -I../../../../../../../Utilities/sequencer -I../../../../../../../Utilities/timer -I../../../../../../../Utilities/lpm/tiny_lpm -I../../../../../../../Middlewares/Third_Party/LoRaWAN/LmHandler/Packages -I../../../../../../../Drivers/CMSIS/Device/ST/STM32WLxx/Include -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Crypto -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Mac/Region -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Mac -I../../../../../../../Middlewares/Third_Party/LoRaWAN/LmHandler -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Utilities -I../../../../../../../Middlewares/Third_Party/SubGHz_Phy -I../../../../../../../Middlewares/ST/STM32_Cryptographic/include -I../../../../../../../Middlewares/Third_Party/SubGHz_Phy/stm32_radio_driver -I../../../../../../../Drivers/CMSIS/Include -I../../../../../../../Drivers/BSP/STM32WLxx_Nucleo -Os -ffunction-sections -fdata-sections -Wall -fstack-usage -fcyclomatic-complexity -MMD -MP -MF"$(@:%.o=%.d)" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@"
|
||||
Middlewares/LoRaWAN/LmhpCompliance.o: D:/ONEDRIVE/STM32WLV13/Middlewares/Third_Party/LoRaWAN/LmHandler/Packages/LmhpCompliance.c Middlewares/LoRaWAN/subdir.mk
|
||||
|
|
|
|||
|
|
@ -1,9 +1,9 @@
|
|||
################################################################################
|
||||
# 自动生成的文件。不要编辑！
|
||||
# Toolchain: GNU Tools for STM32 (11.3.rel1)
|
||||
# Automatically-generated file. Do not edit!
|
||||
# Toolchain: GNU Tools for STM32 (12.3.rel1)
|
||||
################################################################################
|
||||
|
||||
# 将这些工具调用的输入和输出添加到构建变量
|
||||
# Add inputs and outputs from these tool invocations to the build variables
|
||||
C_SRCS += \
|
||||
D:/ONEDRIVE/STM32WLV13/Middlewares/Third_Party/SubGHz_Phy/stm32_radio_driver/radio.c \
|
||||
D:/ONEDRIVE/STM32WLV13/Middlewares/Third_Party/SubGHz_Phy/stm32_radio_driver/radio_driver.c \
|
||||
|
|
@ -20,7 +20,7 @@ C_DEPS += \
|
|||
./Middlewares/SubGHz_Phy/radio_fw.d
|
||||
|
||||
|
||||
# 每个子目录必须为构建它所贡献的源提供规则
|
||||
# Each subdirectory must supply rules for building sources it contributes
|
||||
Middlewares/SubGHz_Phy/radio.o: D:/ONEDRIVE/STM32WLV13/Middlewares/Third_Party/SubGHz_Phy/stm32_radio_driver/radio.c Middlewares/SubGHz_Phy/subdir.mk
|
||||
arm-none-eabi-gcc "$<" -mcpu=cortex-m4 -std=gnu11 -DCORE_CM4 -DYUNHORN_STS_RANDOM -DTOF_1 -DTOF_2 -DSTS_R1D -DSTM32WLE5xx -DUSE_HAL_DRIVER -c -I../../Core/Inc -I../../vl53l0x -I../../TOF/App -I../../TOF/Target -I../../LoRaWAN/App -I../../LoRaWAN/Target -I../../../../../../../Drivers/STM32WLxx_HAL_Driver/Inc -I../../../../../../../Drivers/STM32WLxx_HAL_Driver/Inc/Legacy -I../../../../../../../Utilities/trace/adv_trace -I../../../../../../../Utilities/misc -I../../../../../../../Utilities/sequencer -I../../../../../../../Utilities/timer -I../../../../../../../Utilities/lpm/tiny_lpm -I../../../../../../../Middlewares/Third_Party/LoRaWAN/LmHandler/Packages -I../../../../../../../Drivers/CMSIS/Device/ST/STM32WLxx/Include -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Crypto -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Mac/Region -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Mac -I../../../../../../../Middlewares/Third_Party/LoRaWAN/LmHandler -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Utilities -I../../../../../../../Middlewares/Third_Party/SubGHz_Phy -I../../../../../../../Middlewares/ST/STM32_Cryptographic/include -I../../../../../../../Middlewares/Third_Party/SubGHz_Phy/stm32_radio_driver -I../../../../../../../Drivers/CMSIS/Include -I../../../../../../../Drivers/BSP/STM32WLxx_Nucleo -Os -ffunction-sections -fdata-sections -Wall -fstack-usage -fcyclomatic-complexity -MMD -MP -MF"$(@:%.o=%.d)" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@"
|
||||
Middlewares/SubGHz_Phy/radio_driver.o: D:/ONEDRIVE/STM32WLV13/Middlewares/Third_Party/SubGHz_Phy/stm32_radio_driver/radio_driver.c Middlewares/SubGHz_Phy/subdir.mk
|
||||
|
|
|
|||
|
|
@ -1,9 +1,9 @@
|
|||
################################################################################
|
||||
# 自动生成的文件。不要编辑！
|
||||
# Toolchain: GNU Tools for STM32 (11.3.rel1)
|
||||
# Automatically-generated file. Do not edit!
|
||||
# Toolchain: GNU Tools for STM32 (12.3.rel1)
|
||||
################################################################################
|
||||
|
||||
# 将这些工具调用的输入和输出添加到构建变量
|
||||
# Add inputs and outputs from these tool invocations to the build variables
|
||||
C_SRCS += \
|
||||
D:/ONEDRIVE/STM32WLV13/Utilities/trace/adv_trace/stm32_adv_trace.c \
|
||||
D:/ONEDRIVE/STM32WLV13/Utilities/lpm/tiny_lpm/stm32_lpm.c \
|
||||
|
|
@ -35,7 +35,7 @@ C_DEPS += \
|
|||
./Utilities/stm32_tiny_vsnprintf.d
|
||||
|
||||
|
||||
# 每个子目录必须为构建它所贡献的源提供规则
|
||||
# Each subdirectory must supply rules for building sources it contributes
|
||||
Utilities/stm32_adv_trace.o: D:/ONEDRIVE/STM32WLV13/Utilities/trace/adv_trace/stm32_adv_trace.c Utilities/subdir.mk
|
||||
arm-none-eabi-gcc "$<" -mcpu=cortex-m4 -std=gnu11 -DCORE_CM4 -DYUNHORN_STS_RANDOM -DTOF_1 -DTOF_2 -DSTS_R1D -DSTM32WLE5xx -DUSE_HAL_DRIVER -c -I../../Core/Inc -I../../vl53l0x -I../../TOF/App -I../../TOF/Target -I../../LoRaWAN/App -I../../LoRaWAN/Target -I../../../../../../../Drivers/STM32WLxx_HAL_Driver/Inc -I../../../../../../../Drivers/STM32WLxx_HAL_Driver/Inc/Legacy -I../../../../../../../Utilities/trace/adv_trace -I../../../../../../../Utilities/misc -I../../../../../../../Utilities/sequencer -I../../../../../../../Utilities/timer -I../../../../../../../Utilities/lpm/tiny_lpm -I../../../../../../../Middlewares/Third_Party/LoRaWAN/LmHandler/Packages -I../../../../../../../Drivers/CMSIS/Device/ST/STM32WLxx/Include -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Crypto -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Mac/Region -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Mac -I../../../../../../../Middlewares/Third_Party/LoRaWAN/LmHandler -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Utilities -I../../../../../../../Middlewares/Third_Party/SubGHz_Phy -I../../../../../../../Middlewares/ST/STM32_Cryptographic/include -I../../../../../../../Middlewares/Third_Party/SubGHz_Phy/stm32_radio_driver -I../../../../../../../Drivers/CMSIS/Include -I../../../../../../../Drivers/BSP/STM32WLxx_Nucleo -Os -ffunction-sections -fdata-sections -Wall -fstack-usage -fcyclomatic-complexity -MMD -MP -MF"$(@:%.o=%.d)" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@"
|
||||
Utilities/stm32_lpm.o: D:/ONEDRIVE/STM32WLV13/Utilities/lpm/tiny_lpm/stm32_lpm.c Utilities/subdir.mk
|
||||
|
|
|
|||
|
|
@ -1,13 +1,13 @@
|
|||
################################################################################
|
||||
# 自动生成的文件。不要编辑！
|
||||
# Toolchain: GNU Tools for STM32 (11.3.rel1)
|
||||
# Automatically-generated file. Do not edit!
|
||||
# Toolchain: GNU Tools for STM32 (12.3.rel1)
|
||||
################################################################################
|
||||
|
||||
-include ../makefile.init
|
||||
|
||||
RM := rm -rf
|
||||
|
||||
# 此处定义了参与生成的所有源
|
||||
# All of the sources participating in the build are defined here
|
||||
-include sources.mk
|
||||
-include Utilities/subdir.mk
|
||||
-include Middlewares/SubGHz_Phy/subdir.mk
|
||||
|
|
@ -49,7 +49,7 @@ BUILD_ARTIFACT_EXTENSION := elf
|
|||
BUILD_ARTIFACT_PREFIX :=
|
||||
BUILD_ARTIFACT := $(BUILD_ARTIFACT_PREFIX)$(BUILD_ARTIFACT_NAME)$(if $(BUILD_ARTIFACT_EXTENSION),.$(BUILD_ARTIFACT_EXTENSION),)
|
||||
|
||||
# 将这些工具调用的输入和输出添加到构建变量
|
||||
# Add inputs and outputs from these tool invocations to the build variables
|
||||
EXECUTABLES += \
|
||||
STS_RR_R125.elf \
|
||||
|
||||
|
|
@ -69,39 +69,39 @@ OBJCOPY_BIN += \
|
|||
STS_RR_R125.bin \
|
||||
|
||||
|
||||
# 所有目标
|
||||
# All Target
|
||||
all: main-build
|
||||
|
||||
# 主构建目标
|
||||
# Main-build Target
|
||||
main-build: STS_RR_R125.elf secondary-outputs
|
||||
|
||||
# 工具调用
|
||||
# Tool invocations
|
||||
STS_RR_R125.elf STS_RR_R125.map: $(OBJS) $(USER_OBJS) D:\ONEDRIVE\STM32WLV13\Projects\NUCLEO-WL55JC\Applications\LoRaWAN\STS_RR_R125\STM32CubeIDE\STM32WLE5CCUX_FLASH.ld makefile objects.list $(OPTIONAL_TOOL_DEPS)
|
||||
arm-none-eabi-gcc -o "STS_RR_R125.elf" @"objects.list" $(USER_OBJS) $(LIBS) -mcpu=cortex-m4 -T"D:\ONEDRIVE\STM32WLV13\Projects\NUCLEO-WL55JC\Applications\LoRaWAN\STS_RR_R125\STM32CubeIDE\STM32WLE5CCUX_FLASH.ld" --specs=nosys.specs -Wl,-Map="STS_RR_R125.map" -Wl,--gc-sections -static -L../../../../../../../Middlewares/ST/STM32_Cryptographic/lib --specs=nano.specs -mfloat-abi=soft -mthumb -Wl,--start-group -lc -lm -Wl,--end-group
|
||||
@echo '已结束构建目标： $@'
|
||||
@echo 'Finished building target: $@'
|
||||
@echo ' '
|
||||
|
||||
default.size.stdout: $(EXECUTABLES) makefile objects.list $(OPTIONAL_TOOL_DEPS)
|
||||
arm-none-eabi-size $(EXECUTABLES)
|
||||
@echo '已结束构建： $@'
|
||||
@echo 'Finished building: $@'
|
||||
@echo ' '
|
||||
|
||||
STS_RR_R125.list: $(EXECUTABLES) makefile objects.list $(OPTIONAL_TOOL_DEPS)
|
||||
arm-none-eabi-objdump -h -S $(EXECUTABLES) > "STS_RR_R125.list"
|
||||
@echo '已结束构建： $@'
|
||||
@echo 'Finished building: $@'
|
||||
@echo ' '
|
||||
|
||||
STS_RR_R125.hex: $(EXECUTABLES) makefile objects.list $(OPTIONAL_TOOL_DEPS)
|
||||
arm-none-eabi-objcopy -O ihex $(EXECUTABLES) "STS_RR_R125.hex"
|
||||
@echo '已结束构建： $@'
|
||||
@echo 'Finished building: $@'
|
||||
@echo ' '
|
||||
|
||||
STS_RR_R125.bin: $(EXECUTABLES) makefile objects.list $(OPTIONAL_TOOL_DEPS)
|
||||
arm-none-eabi-objcopy -O binary $(EXECUTABLES) "STS_RR_R125.bin"
|
||||
@echo '已结束构建： $@'
|
||||
@echo 'Finished building: $@'
|
||||
@echo ' '
|
||||
|
||||
# 其他目标
|
||||
# Other Targets
|
||||
clean:
|
||||
-$(RM) STS_RR_R125.bin STS_RR_R125.elf STS_RR_R125.hex STS_RR_R125.list STS_RR_R125.map default.size.stdout
|
||||
-@echo ' '
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
################################################################################
|
||||
# 自动生成的文件。不要编辑！
|
||||
# Toolchain: GNU Tools for STM32 (11.3.rel1)
|
||||
# Automatically-generated file. Do not edit!
|
||||
# Toolchain: GNU Tools for STM32 (12.3.rel1)
|
||||
################################################################################
|
||||
|
||||
USER_OBJS :=
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
################################################################################
|
||||
# 自动生成的文件。不要编辑！
|
||||
# Toolchain: GNU Tools for STM32 (11.3.rel1)
|
||||
# Automatically-generated file. Do not edit!
|
||||
# Toolchain: GNU Tools for STM32 (12.3.rel1)
|
||||
################################################################################
|
||||
|
||||
ELF_SRCS :=
|
||||
|
|
@ -22,7 +22,7 @@ S_UPPER_DEPS :=
|
|||
C_DEPS :=
|
||||
OBJCOPY_BIN :=
|
||||
|
||||
# 此处必须描述包含源文件的每个子目录
|
||||
# Every subdirectory with source files must be described here
|
||||
SUBDIRS := \
|
||||
Application/User/Core \
|
||||
Application/User/LoRaWAN/App \
|
||||
|
|
|
|||
|
|
@ -86,13 +86,13 @@ SECTIONS
|
|||
. = ALIGN(4);
|
||||
} >FLASH
|
||||
|
||||
.ARM.extab : {
|
||||
.ARM.extab (READONLY) : {
|
||||
. = ALIGN(4);
|
||||
*(.ARM.extab* .gnu.linkonce.armextab.*)
|
||||
. = ALIGN(4);
|
||||
} >FLASH
|
||||
|
||||
.ARM : {
|
||||
.ARM (READONLY): {
|
||||
. = ALIGN(4);
|
||||
__exidx_start = .;
|
||||
*(.ARM.exidx*)
|
||||
|
|
@ -100,7 +100,7 @@ SECTIONS
|
|||
. = ALIGN(4);
|
||||
} >FLASH
|
||||
|
||||
.preinit_array :
|
||||
.preinit_array (READONLY) :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
PROVIDE_HIDDEN (__preinit_array_start = .);
|
||||
|
|
@ -109,7 +109,7 @@ SECTIONS
|
|||
. = ALIGN(4);
|
||||
} >FLASH
|
||||
|
||||
.init_array :
|
||||
.init_array (READONLY):
|
||||
{
|
||||
. = ALIGN(4);
|
||||
PROVIDE_HIDDEN (__init_array_start = .);
|
||||
|
|
@ -119,7 +119,7 @@ SECTIONS
|
|||
. = ALIGN(4);
|
||||
} >FLASH
|
||||
|
||||
.fini_array :
|
||||
.fini_array (READONLY):
|
||||
{
|
||||
. = ALIGN(4);
|
||||
PROVIDE_HIDDEN (__fini_array_start = .);
|
||||
|
|
|
|||
Loading…
Reference in New Issue