Pre-defines
	TOF_1	, U3, RIGHT SENSOR, XSHUT:PB-3, INT:PB-5
	TOF_2	, U4, LEFT SENSOR, XSHUT:PA-9,INT:PB-5        *** Default TOF ON BOARD
	TOF_3	, P6,P7,P10 out interface, XSHUT:PA-10,INT:PB-5
	SOAP_LEVEL_SENSOR, Switch/XSHUT: PB-3, INPUT-STATUS: PA-10
	ROCTEC_R5, for upload payload format with distance only, 2 bytes
	LED_ONBOARD, If LED soldered on board
	
	YUNHORN_STS_RANDOM    for DevNonce fix issue


@par Description

	STS_R1 STS_R2 STS_R5 For 
	
	| STS-R1    |	Jumbo Roll Level			|    TOF VL53L0X			|
	| STS-R2	|	Tissue Paper Level			|    TOF VL53L0X			|
	| STS-R5	|	Waste Bin Level				|    TOF VL53L0X			|
	
	# STS-R5	#	Waste Bin Level	RocTec		|    TOF VL53L0X			|
	
	| STS-O2	|	Presence Sensor				|	 TOF VL53L1/L3			|
	| STS-O3	|	Presence Sensor				|	 TOF VL53L1/L3			|
	| STS-O4	|	Urinal Occupy Sensor		|	 TOF VL53L1/L3			|
	| STS-O5	|	Door Contact				|	 GPIO ReedSwitch		|
	
	| STS-R3	|	Soap Dispenser Sensor		|    GPIO Capacitive 		|
	| STS-R4	|	Cistern/Tank Level Sensor	|    UART UltraSonic 		|
	
	| STS-M1	|	Water Leakage Sensor		|    GPIO ReedSwitch 		|
	| STS-M3	|	Tank Level Sensor			|    UART UltraSonic 		|
	| STS-M4    |   Water Flow Sensor           |    TIM2_ETR counting, PA5 |   	
	
	
	| STS-P1	|	Queueing length Sensor		|    IW6843 				|
	| STS-P2	|	Bi-Directional People Count	|    TOF VL53L1/L3			|
	
	| STS-M7	|	Vibration Sensor			|    I2C 3-Axis vibration	|
	
	
	Jumbo Roll, Tissue Paper, Waste Bin sensor

   2024-05-24   GOOD R1D with higher power consumption at 30uA
   2024-05-28   GOOD R1D with lower power and TPS shutdown to 0V, yet, TOF range data incorrect. or not ranging at all
   2024-05-28   range distance same 1000mm
   2024-07-03   GPIO analog cannot be RESET in enterStopMode...only deinit
   2024-08-29   STS-P2-L1X start
  ******************************************************************************