/* USER CODE BEGIN Header */
/**
******************************************************************************
* @file : stm32wlxx_nucleo.h
* @brief : header file for the BSP Common driver
******************************************************************************
* @attention
*
* Copyright (c) 2023 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* USER CODE END Header */
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32WLXX_NUCLEO_H
#define __STM32WLXX_NUCLEO_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32wlxx_nucleo_conf.h"
#include "stm32wlxx_nucleo_errno.h"
#include "main.h"
#if (USE_BSP_COM_FEATURE > 0)
#if (USE_COM_LOG > 0)
#if defined(__ICCARM__) || defined(__CC_ARM) || (defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)) /* For IAR and ARM Compiler 5 and 6*/
#include <stdio.h>
#endif
#endif
#endif
/** @addtogroup BSP
* @{
*/
/** @defgroup STM32WLXX_NUCLEO
* @{
*/
/** @defgroup STM32WLXX_NUCLEO_LOW_LEVEL
* @{
*/
/** @defgroup STM32L4XX_NUCLEO_LOW_LEVEL_Exported_Constants LOW LEVEL Exported Constants
* @{
*/
/**
* @brief STM32WLXX NUCLEO BSP Driver version number V1.0.0
*/
#define __STM32WLXX_NUCLEO_BSP_VERSION_MAIN (uint32_t)(0x01) /*!< [31:24] main version */
#define __STM32WLXX_NUCLEO_BSP_VERSION_SUB1 (uint32_t)(0x00) /*!< [23:16] sub1 version */
#define __STM32WLXX_NUCLEO_BSP_VERSION_SUB2 (uint32_t)(0x00) /*!< [15:8] sub2 version */
#define __STM32WLXX_NUCLEO_BSP_VERSION_RC (uint32_t)(0x00) /*!< [7:0] release candidate */
#define __STM32WLXX_NUCLEO_BSP_VERSION ((__STM32WLXX_NUCLEO_BSP_VERSION_MAIN << 24)\
|(__STM32WLXX_NUCLEO_BSP_VERSION_SUB1 << 16)\
|(__STM32WLXX_NUCLEO_BSP_VERSION_SUB2 << 8 )\
|(__STM32WLXX_NUCLEO_BSP_VERSION_RC))
/** @defgroup STM32WLXX_NUCLEO_LOW_LEVEL_Exported_Types STM32WLXX_NUCLEO LOW LEVEL Exported Types
* @{
*/
/**
* @brief Define for STM32WLXX_NUCLEO board
*/
#if !defined (USE_STM32WLXX_NUCLEO)
#define USE_STM32WLXX_NUCLEO
#endif
#ifndef USE_BSP_COM_FEATURE
#define USE_BSP_COM_FEATURE 0U
#endif
/**
* @}
*/
/** @defgroup STM32WLXX_NUCLEO_LOW_LEVEL_BUTTON STM32WLXX_NUCLEO LOW LEVEL BUTTON
* @{
*/
/* Button state */
#define BUTTON_RELEASED 0U
#define BUTTON_PRESSED 1U
/** Define number of BUTTON **/
#define BUTTONn 1U
/**
* @brief User push-button
*/
/** Definition for BSP USER BUTTON **/
#define USER_BUTTON_PIN GPIO_PIN_0
#define USER_BUTTON_GPIO_PORT GPIOA
#define USER_BUTTON_EXTI_IRQn EXTI0_IRQn
#define USER_BUTTON_EXTI_LINE EXTI_LINE_0
#define H_EXTI_0 hpb_exti[BUTTON_USER]
/**
* @}
*/
/** @defgroup STM32WLXX_NUCLEO_LOW_LEVEL_COM STM32WLXX_NUCLEO LOW LEVEL COM
* @{
*/
/**
* @brief Definition for COM portx, connected to USART1
*/
#define BUS_USART1_INSTANCE USART1
#define BUS_USART1_RX_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE()
#define BUS_USART1_RX_GPIO_PORT GPIOB
#define BUS_USART1_RX_GPIO_CLK_DISABLE() __HAL_RCC_GPIOB_CLK_DISABLE()
#define BUS_USART1_RX_GPIO_PIN GPIO_PIN_7
#define BUS_USART1_RX_GPIO_AF GPIO_AF7_USART1
#define BUS_USART1_TX_GPIO_PIN GPIO_PIN_6
#define BUS_USART1_TX_GPIO_PORT GPIOB
#define BUS_USART1_TX_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE()
#define BUS_USART1_TX_GPIO_CLK_DISABLE() __HAL_RCC_GPIOB_CLK_DISABLE()
#define BUS_USART1_TX_GPIO_AF GPIO_AF7_USART1
/**
* @}
*/
/** @defgroup STM32WLXX_NUCLEO_LOW_LEVEL_Exported_Types LOW LEVEL Exported Types
* @{
*/
#ifndef USE_BSP_COM
#define USE_BSP_COM 0U
#endif
#ifndef USE_COM_LOG
#define USE_COM_LOG 1U
#endif
#ifndef BSP_BUTTON_USER_IT_PRIORITY
#define BSP_BUTTON_USER_IT_PRIORITY 15U
#endif
typedef enum
{
BUTTON_USER = 0U,
}Button_TypeDef;
/* Keep compatibility with CMSIS Pack already delivered */
#define BUTTON_KEY BUTTON_USER
typedef enum
{
BUTTON_MODE_GPIO = 0,
BUTTON_MODE_EXTI = 1
} ButtonMode_TypeDef;
#if (USE_BSP_COM_FEATURE > 0)
typedef enum
{
COM1 = 0U,
COMn
}COM_TypeDef;
typedef enum
{
COM_WORDLENGTH_8B = UART_WORDLENGTH_8B,
COM_WORDLENGTH_9B = UART_WORDLENGTH_9B,
}COM_WordLengthTypeDef;
typedef enum
{
COM_STOPBITS_1 = UART_STOPBITS_1,
COM_STOPBITS_2 = UART_STOPBITS_2,
}COM_StopBitsTypeDef;
typedef enum
{
COM_PARITY_NONE = UART_PARITY_NONE,
COM_PARITY_EVEN = UART_PARITY_EVEN,
COM_PARITY_ODD = UART_PARITY_ODD,
}COM_ParityTypeDef;
typedef enum
{
COM_HWCONTROL_NONE = UART_HWCONTROL_NONE,
COM_HWCONTROL_RTS = UART_HWCONTROL_RTS,
COM_HWCONTROL_CTS = UART_HWCONTROL_CTS,
COM_HWCONTROL_RTS_CTS = UART_HWCONTROL_RTS_CTS,
}COM_HwFlowCtlTypeDef;
typedef struct
{
uint32_t BaudRate;
COM_WordLengthTypeDef WordLength;
COM_StopBitsTypeDef StopBits;
COM_ParityTypeDef Parity;
COM_HwFlowCtlTypeDef HwFlowCtl;
}COM_InitTypeDef;
#endif
#define MX_UART_InitTypeDef COM_InitTypeDef
#define MX_UART_StopBitsTypeDef COM_StopBitsTypeDef
#define MX_UART_ParityTypeDef COM_ParityTypeDef
#define MX_UART_HwFlowCtlTypeDef COM_HwFlowCtlTypeDef
#if (USE_HAL_UART_REGISTER_CALLBACKS == 1U)
typedef struct
{
void (* pMspInitCb)(UART_HandleTypeDef *);
void (* pMspDeInitCb)(UART_HandleTypeDef *);
} BSP_COM_Cb_t;
#endif /* (USE_HAL_UART_REGISTER_CALLBACKS == 1U) */
/**
* @}
*/
#define COMn 1U
#define COM1_UART USART1
#define COM_POLL_TIMEOUT 1000
extern UART_HandleTypeDef hcom_uart[COMn];
#define huart1 hcom_uart[COM1]
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/** @defgroup STM32WLXX_NUCLEO_LOW_LEVEL_Exported_Variables LOW LEVEL Exported Constants
* @{
*/
extern EXTI_HandleTypeDef hpb_exti[BUTTONn];
/**
* @}
*/
/** @defgroup STM32WLXX_NUCLEO_LOW_LEVEL_Exported_Functions STM32WLXX_NUCLEO LOW LEVEL Exported Functions
* @{
*/
int32_t BSP_GetVersion(void);
int32_t BSP_PB_Init(Button_TypeDef Button, ButtonMode_TypeDef ButtonMode);
int32_t BSP_PB_DeInit(Button_TypeDef Button);
int32_t BSP_PB_GetState(Button_TypeDef Button);
void BSP_PB_Callback(Button_TypeDef Button);
void BSP_PB_IRQHandler (Button_TypeDef Button);
#if (USE_BSP_COM_FEATURE > 0)
int32_t BSP_COM_Init(COM_TypeDef COM);
int32_t BSP_COM_DeInit(COM_TypeDef COM);
#endif
#if (USE_COM_LOG > 0)
int32_t BSP_COM_SelectLogPort(COM_TypeDef COM);
#endif
#if (USE_HAL_UART_REGISTER_CALLBACKS == 1U)
int32_t BSP_COM_RegisterDefaultMspCallbacks(COM_TypeDef COM);
int32_t BSP_COM_RegisterMspCallbacks(COM_TypeDef COM , BSP_COM_Cb_t *Callback);
#endif /* USE_HAL_UART_REGISTER_CALLBACKS */
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __STM32WLXX_NUCLEO__H */