sundp
/
WL55JC_AS923
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

rebase standard v13

This commit is contained in:
Yunhorn 2024-06-27 16:25:35 +08:00
parent e4d7d6998d
commit 06af55bf9c
10 changed files with 74 additions and 94 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6
Core/Inc/main.h
View File

@ -85,7 +85,13 @@ void Error_Handler(void);
#define USARTx_TX_GPIO_Port GPIOA #define USARTx_TX_GPIO_Port GPIOA
/* USER CODE BEGIN Private defines */ /* USER CODE BEGIN Private defines */
#ifdef STS_WS
#define HX711_SCK_PIN GPIO_PIN_5
#define HX711_DOUT_PIN GPIO_PIN_6
#define HX711_SCK_PORT GPIOA
#define HX711_DOUT_PORT GPIOA
#endif
/* USER CODE END Private defines */ /* USER CODE END Private defines */
#ifdef __cplusplus #ifdef __cplusplus

2
Core/Inc/sys_conf.h
View File

@ -81,7 +81,7 @@ extern "C" {
* @brief Disable Low Power mode * @brief Disable Low Power mode
* @note 0: LowPowerMode enabled. MCU enters stop2 mode, 1: LowPowerMode disabled. MCU enters sleep mode only * @note 0: LowPowerMode enabled. MCU enters stop2 mode, 1: LowPowerMode disabled. MCU enters sleep mode only
*/ */
#define LOW_POWER_DISABLE 1 #define LOW_POWER_DISABLE 0
/* USER CODE BEGIN EC */ /* USER CODE BEGIN EC */

2
Core/Inc/utilities_def.h
View File

@ -80,7 +80,7 @@ typedef enum
CFG_SEQ_Task_LoRaStoreContextEvent, CFG_SEQ_Task_LoRaStoreContextEvent,
CFG_SEQ_Task_LoRaStopJoinEvent, CFG_SEQ_Task_LoRaStopJoinEvent,
/* USER CODE BEGIN CFG_SEQ_Task_Id_t */ /* USER CODE BEGIN CFG_SEQ_Task_Id_t */
CFG_SEQ_Task_YunhornSTSP1CheckingEvent,
/* USER CODE END CFG_SEQ_Task_Id_t */ /* USER CODE END CFG_SEQ_Task_Id_t */
CFG_SEQ_Task_NBR CFG_SEQ_Task_NBR
} CFG_SEQ_Task_Id_t; } CFG_SEQ_Task_Id_t;

38
Core/Src/gpio.c
View File

@ -49,21 +49,6 @@ void MX_GPIO_Init(void)
__HAL_RCC_GPIOC_CLK_ENABLE(); __HAL_RCC_GPIOC_CLK_ENABLE();
__HAL_RCC_GPIOA_CLK_ENABLE(); __HAL_RCC_GPIOA_CLK_ENABLE();
GPIO_InitStruct.Pin = GPIO_PIN_All;
GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = GPIO_NOPULL;
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
__HAL_RCC_GPIOB_CLK_DISABLE();
__HAL_RCC_GPIOC_CLK_DISABLE();
GPIO_InitStruct.Pin = BUT1_Pin;
GPIO_InitStruct.Mode = GPIO_MODE_IT_RISING_FALLING;
GPIO_InitStruct.Pull = GPIO_PULLUP;
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
__HAL_RCC_GPIOA_CLK_DISABLE();
#if 0
/*Configure GPIO pin Output Level */ /*Configure GPIO pin Output Level */
HAL_GPIO_WritePin(GPIOB, LED1_Pin|LED2_Pin|PROB2_Pin|PROB1_Pin HAL_GPIO_WritePin(GPIOB, LED1_Pin|LED2_Pin|PROB2_Pin|PROB1_Pin
|LED3_Pin, GPIO_PIN_RESET); |LED3_Pin, GPIO_PIN_RESET);
@ -93,17 +78,36 @@ void MX_GPIO_Init(void)
GPIO_InitStruct.Mode = GPIO_MODE_IT_FALLING; GPIO_InitStruct.Mode = GPIO_MODE_IT_FALLING;
GPIO_InitStruct.Pull = GPIO_PULLUP; GPIO_InitStruct.Pull = GPIO_PULLUP;
HAL_GPIO_Init(BUT3_GPIO_Port, &GPIO_InitStruct); HAL_GPIO_Init(BUT3_GPIO_Port, &GPIO_InitStruct);
#ifdef STS_WS
// STS_Weight_Scale
// HX711_SCK
GPIO_InitStruct.Pin = HX711_SCK_PIN;
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
GPIO_InitStruct.Pull = GPIO_PULLUP;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
HAL_GPIO_Init(HX711_SCK_PORT, &GPIO_InitStruct);
// HX711_DOUT
GPIO_InitStruct.Pin = HX711_DOUT_PIN;
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
GPIO_InitStruct.Pull = GPIO_PULLUP;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
HAL_GPIO_Init(HX711_DOUT_PORT, &GPIO_InitStruct);
HAL_GPIO_WritePin(HX711_SCK_PORT, HX711_SCK_PIN, GPIO_PIN_RESET);
#endif #endif
/* EXTI interrupt init*/ /* EXTI interrupt init*/
HAL_NVIC_SetPriority(EXTI0_IRQn, 0, 0); HAL_NVIC_SetPriority(EXTI0_IRQn, 0, 0);
HAL_NVIC_EnableIRQ(EXTI0_IRQn); HAL_NVIC_EnableIRQ(EXTI0_IRQn);
#if 0
HAL_NVIC_SetPriority(EXTI1_IRQn, 0, 0); HAL_NVIC_SetPriority(EXTI1_IRQn, 0, 0);
HAL_NVIC_EnableIRQ(EXTI1_IRQn); HAL_NVIC_EnableIRQ(EXTI1_IRQn);
HAL_NVIC_SetPriority(EXTI9_5_IRQn, 0, 0); HAL_NVIC_SetPriority(EXTI9_5_IRQn, 0, 0);
HAL_NVIC_EnableIRQ(EXTI9_5_IRQn); HAL_NVIC_EnableIRQ(EXTI9_5_IRQn);
#endif
} }
/* USER CODE BEGIN 2 */ /* USER CODE BEGIN 2 */

4
Core/Src/rtc.c
View File

@ -65,7 +65,7 @@ void MX_RTC_Init(void)
{ {
Error_Handler(); Error_Handler();
} }
#if 0
/** Enable the Alarm A /** Enable the Alarm A
*/ */
sAlarm.BinaryAutoClr = RTC_ALARMSUBSECONDBIN_AUTOCLR_NO; sAlarm.BinaryAutoClr = RTC_ALARMSUBSECONDBIN_AUTOCLR_NO;
@ -78,7 +78,7 @@ void MX_RTC_Init(void)
Error_Handler(); Error_Handler();
} }
/* USER CODE BEGIN RTC_Init 2 */ /* USER CODE BEGIN RTC_Init 2 */
#endif
/* USER CODE END RTC_Init 2 */ /* USER CODE END RTC_Init 2 */
} }

27
Core/Src/stm32_lpm_if.c
View File

@ -25,7 +25,7 @@
#include "usart_if.h" #include "usart_if.h"
/* USER CODE BEGIN Includes */ /* USER CODE BEGIN Includes */
#include "gpio.h"
/* USER CODE END Includes */ /* USER CODE END Includes */
/* External variables ---------------------------------------------------------*/ /* External variables ---------------------------------------------------------*/
@ -78,30 +78,14 @@ const struct UTIL_LPM_Driver_s UTIL_PowerDriver =
void PWR_EnterOffMode(void) void PWR_EnterOffMode(void)
{ {
/* USER CODE BEGIN EnterOffMode_1 */ /* USER CODE BEGIN EnterOffMode_1 */
/* Enable Power Clock */
HAL_SuspendTick();
/* Disable all used wakeup sources: Pin1(PA.0) */
HAL_PWR_DisableWakeUpPin(PWR_WAKEUP_PIN1|PWR_WAKEUP_PIN2|PWR_WAKEUP_PIN3);
/* Clear all related wakeup flags */
__HAL_PWR_CLEAR_FLAG(PWR_FLAG_WU);
/* Re-enable all used wakeup sources: Pin1(PA.0) */
HAL_PWR_EnableWakeUpPin(PWR_WAKEUP_PIN1);
/*## Enter Standby Mode ####################################################*/
/* Request to enter STANDBY mode */
HAL_PWR_EnterSTANDBYMode();
/* USER CODE END EnterOffMode_1 */ /* USER CODE END EnterOffMode_1 */
} }
void PWR_ExitOffMode(void) void PWR_ExitOffMode(void)
{ {
/* USER CODE BEGIN ExitOffMode_1 */ /* USER CODE BEGIN ExitOffMode_1 */
//HAL_ResumeTick();
__HAL_PWR_CLEAR_FLAG(PWR_FLAG_WU);
__HAL_PWR_CLEAR_FLAG(PWR_FLAG_SB);
/* USER CODE END ExitOffMode_1 */ /* USER CODE END ExitOffMode_1 */
} }
@ -110,10 +94,6 @@ void PWR_EnterStopMode(void)
/* USER CODE BEGIN EnterStopMode_1 */ /* USER CODE BEGIN EnterStopMode_1 */
/* USER CODE END EnterStopMode_1 */ /* USER CODE END EnterStopMode_1 */
HAL_GPIO_WritePin(GPIOB, GPIO_PIN_All, GPIO_PIN_RESET);
HAL_GPIO_WritePin(GPIOA, ~GPIO_PIN_0, GPIO_PIN_RESET);
vcom_DeInit();
HAL_SuspendTick(); HAL_SuspendTick();
/* Clear Status Flag before entering STOP/STANDBY Mode */ /* Clear Status Flag before entering STOP/STANDBY Mode */
LL_PWR_ClearFlag_C1STOP_C1STB(); LL_PWR_ClearFlag_C1STOP_C1STB();
@ -140,8 +120,7 @@ void PWR_ExitStopMode(void)
SRAM ctrls, DMAx, DMAMux, AES, RNG, HSEM */ SRAM ctrls, DMAx, DMAMux, AES, RNG, HSEM */
/* Resume not retained USARTx and DMA */ /* Resume not retained USARTx and DMA */
//MX_GPIO_Init(); vcom_Resume();
//vcom_Resume();
/* USER CODE BEGIN ExitStopMode_2 */ /* USER CODE BEGIN ExitStopMode_2 */
/* USER CODE END ExitStopMode_2 */ /* USER CODE END ExitStopMode_2 */

4
Core/Src/stm32wlxx_it.c
View File

@ -227,7 +227,7 @@ void EXTI0_IRQHandler(void)
/* USER CODE END EXTI0_IRQn 1 */ /* USER CODE END EXTI0_IRQn 1 */
} }
#if 0
/** /**
* @brief This function handles EXTI Line 1 Interrupt. * @brief This function handles EXTI Line 1 Interrupt.
*/ */
@ -283,7 +283,7 @@ void USART2_IRQHandler(void)
/* USER CODE END USART2_IRQn 1 */ /* USER CODE END USART2_IRQn 1 */
} }
#endif
/** /**
* @brief This function handles RTC Alarms (A and B) Interrupt. * @brief This function handles RTC Alarms (A and B) Interrupt.
*/ */

12
Core/Src/sys_app.c
View File

@ -32,7 +32,9 @@
#include "sys_sensors.h" #include "sys_sensors.h"
/* USER CODE BEGIN Includes */ /* USER CODE BEGIN Includes */
#ifdef STS_WS
#include "sts_weight_scale.h"
#endif
/* USER CODE END Includes */ /* USER CODE END Includes */
/* External variables ---------------------------------------------------------*/ /* External variables ---------------------------------------------------------*/
@ -100,7 +102,7 @@ void SystemApp_Init(void)
UTIL_TIMER_Init(); UTIL_TIMER_Init();
SYS_TimerInitialisedFlag = 1; SYS_TimerInitialisedFlag = 1;
/* Initializes the SW probes pins and the monitor RF pins via Alternate Function */ /* Initializes the SW probes pins and the monitor RF pins via Alternate Function */
//DBG_Init(); DBG_Init();
/*Initialize the terminal */ /*Initialize the terminal */
UTIL_ADV_TRACE_Init(); UTIL_ADV_TRACE_Init();
@ -117,12 +119,14 @@ void SystemApp_Init(void)
/*Initialize the Sensors */ /*Initialize the Sensors */
EnvSensors_Init(); EnvSensors_Init();
#ifdef STS_WS
sts_weight_scale_init();
#endif
/*Init low power manager*/ /*Init low power manager*/
UTIL_LPM_Init(); UTIL_LPM_Init();
/* Disable Stand-by mode */ /* Disable Stand-by mode */
UTIL_LPM_SetOffMode((1 << CFG_LPM_APPLI_Id), UTIL_LPM_DISABLE); UTIL_LPM_SetOffMode((1 << CFG_LPM_APPLI_Id), UTIL_LPM_DISABLE);
UTIL_LPM_SetOffMode((1 << CFG_LPM_UART_TX_Id), UTIL_LPM_ENABLE);
#if defined (LOW_POWER_DISABLE) && (LOW_POWER_DISABLE == 1) #if defined (LOW_POWER_DISABLE) && (LOW_POWER_DISABLE == 1)
/* Disable Stop Mode */ /* Disable Stop Mode */
UTIL_LPM_SetStopMode((1 << CFG_LPM_APPLI_Id), UTIL_LPM_DISABLE); UTIL_LPM_SetStopMode((1 << CFG_LPM_APPLI_Id), UTIL_LPM_DISABLE);

7
Core/Src/usart.c
View File

@ -100,18 +100,13 @@ void HAL_UART_MspInit(UART_HandleTypeDef* uartHandle)
PA3 ------> USART2_RX PA3 ------> USART2_RX
PA2 ------> USART2_TX PA2 ------> USART2_TX
*/ */
GPIO_InitStruct.Pin = USARTx_TX_Pin; GPIO_InitStruct.Pin = USARTx_RX_Pin|USARTx_TX_Pin;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL; GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
GPIO_InitStruct.Alternate = GPIO_AF7_USART2; GPIO_InitStruct.Alternate = GPIO_AF7_USART2;
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
GPIO_InitStruct.Pin = USARTx_RX_Pin;
GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = GPIO_NOPULL;
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
/* USART2 DMA Init */ /* USART2 DMA Init */
/* USART2_TX Init */ /* USART2_TX Init */
hdma_usart2_tx.Instance = DMA1_Channel5; hdma_usart2_tx.Instance = DMA1_Channel5;

62
LoRaWAN/App/lora_app.c
View File

@ -36,7 +36,9 @@
#include "flash_if.h" #include "flash_if.h"
/* USER CODE BEGIN Includes */ /* USER CODE BEGIN Includes */
#include "gpio.h" #ifdef STS_WS
#include "sts_weight_scale.h"
#endif
/* USER CODE END Includes */ /* USER CODE END Includes */
/* External variables ---------------------------------------------------------*/ /* External variables ---------------------------------------------------------*/
@ -215,7 +217,6 @@ static void OnPingSlotPeriodicityChanged(uint8_t pingSlotPeriodicity);
static void OnSystemReset(void); static void OnSystemReset(void);
/* USER CODE BEGIN PFP */ /* USER CODE BEGIN PFP */
static void OnYunhornSTSP1CheckingEvent(void);
/** /**
* @brief LED Tx timer callback function * @brief LED Tx timer callback function
@ -301,7 +302,7 @@ static UTIL_TIMER_Object_t TxTimer;
/** /**
* @brief Tx Timer period * @brief Tx Timer period
*/ */
static UTIL_TIMER_Time_t TxPeriodicity = 1000; static UTIL_TIMER_Time_t TxPeriodicity = APP_TX_DUTYCYCLE;
/** /**
* @brief Join Timer period * @brief Join Timer period
@ -343,8 +344,7 @@ static UTIL_TIMER_Object_t JoinLedTimer;
/* Exported functions ---------------------------------------------------------*/ /* Exported functions ---------------------------------------------------------*/
/* USER CODE BEGIN EF */ /* USER CODE BEGIN EF */
volatile uint8_t door_status=0, door_changed_flag=0, door_previous_status=0;
volatile uint32_t checking_sn=0;
/* USER CODE END EF */ /* USER CODE END EF */
void LoRaWAN_Init(void) void LoRaWAN_Init(void)
@ -406,7 +406,7 @@ void LoRaWAN_Init(void)
UTIL_SEQ_RegTask((1 << CFG_SEQ_Task_LoRaSendOnTxTimerOrButtonEvent), UTIL_SEQ_RFU, SendTxData); UTIL_SEQ_RegTask((1 << CFG_SEQ_Task_LoRaSendOnTxTimerOrButtonEvent), UTIL_SEQ_RFU, SendTxData);
UTIL_SEQ_RegTask((1 << CFG_SEQ_Task_LoRaStoreContextEvent), UTIL_SEQ_RFU, StoreContext); UTIL_SEQ_RegTask((1 << CFG_SEQ_Task_LoRaStoreContextEvent), UTIL_SEQ_RFU, StoreContext);
UTIL_SEQ_RegTask((1 << CFG_SEQ_Task_LoRaStopJoinEvent), UTIL_SEQ_RFU, StopJoin); UTIL_SEQ_RegTask((1 << CFG_SEQ_Task_LoRaStopJoinEvent), UTIL_SEQ_RFU, StopJoin);
UTIL_SEQ_RegTask((1 << CFG_SEQ_Task_YunhornSTSP1CheckingEvent),UTIL_SEQ_RFU, OnYunhornSTSP1CheckingEvent);
/* Init Info table used by LmHandler*/ /* Init Info table used by LmHandler*/
LoraInfo_Init(); LoraInfo_Init();
@ -425,7 +425,7 @@ void LoRaWAN_Init(void)
if (EventType == TX_ON_TIMER) if (EventType == TX_ON_TIMER)
{ {
/* send every time timer elapses */ /* send every time timer elapses */
UTIL_TIMER_Create(&TxTimer, TxPeriodicity, UTIL_TIMER_PERIODIC, OnTxTimerEvent, NULL); UTIL_TIMER_Create(&TxTimer, TxPeriodicity, UTIL_TIMER_ONESHOT, OnTxTimerEvent, NULL);
UTIL_TIMER_Start(&TxTimer); UTIL_TIMER_Start(&TxTimer);
} }
else else
@ -448,9 +448,6 @@ void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin)
{ {
case BUT1_Pin: case BUT1_Pin:
/* Note: when "EventType == TX_ON_TIMER" this GPIO is not initialized */ /* Note: when "EventType == TX_ON_TIMER" this GPIO is not initialized */
door_changed_flag = 1;
UTIL_SEQ_SetTask((1 << CFG_SEQ_Task_YunhornSTSP1CheckingEvent), CFG_SEQ_Prio_0);
if (EventType == TX_ON_EVENT) if (EventType == TX_ON_EVENT)
{ {
UTIL_SEQ_SetTask((1 << CFG_SEQ_Task_LoRaSendOnTxTimerOrButtonEvent), CFG_SEQ_Prio_0); UTIL_SEQ_SetTask((1 << CFG_SEQ_Task_LoRaSendOnTxTimerOrButtonEvent), CFG_SEQ_Prio_0);
@ -471,21 +468,7 @@ void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin)
/* Private functions ---------------------------------------------------------*/ /* Private functions ---------------------------------------------------------*/
/* USER CODE BEGIN PrFD */ /* USER CODE BEGIN PrFD */
static void OnYunhornSTSP1CheckingEvent(void)
{
door_status = HAL_GPIO_ReadPin(GPIOA,GPIO_PIN_0);
if (door_status != door_previous_status)
{
door_previous_status = door_status;
door_changed_flag = 1;
APP_LOG(TS_OFF,VLEVEL_M,"\r\n----- Door Status Changed-------------\r\n");
}
//UTIL_SEQ_SetTask((1 << CFG_SEQ_Task_LoRaSendOnTxTimerOrButtonEvent), CFG_SEQ_Prio_0);
}
/* USER CODE END PrFD */ /* USER CODE END PrFD */
static void OnRxData(LmHandlerAppData_t *appData, LmHandlerRxParams_t *params) static void OnRxData(LmHandlerAppData_t *appData, LmHandlerRxParams_t *params)
@ -574,6 +557,9 @@ static void SendTxData(void)
LmHandlerErrorStatus_t status = LORAMAC_HANDLER_ERROR; LmHandlerErrorStatus_t status = LORAMAC_HANDLER_ERROR;
uint8_t batteryLevel = GetBatteryLevel(); uint8_t batteryLevel = GetBatteryLevel();
sensor_t sensor_data; sensor_t sensor_data;
#ifdef STS_WS
sts_sensor_t sts_sensor_data;
#endif
UTIL_TIMER_Time_t nextTxIn = 0; UTIL_TIMER_Time_t nextTxIn = 0;
if (LmHandlerIsBusy() == false) if (LmHandlerIsBusy() == false)
@ -591,10 +577,14 @@ static void SendTxData(void)
#endif /* CAYENNE_LPP */ #endif /* CAYENNE_LPP */
EnvSensors_Read(&sensor_data); EnvSensors_Read(&sensor_data);
#if 0 #ifdef STS_WS
sts_weight_scale(&sts_sensor_data);
APP_LOG(TS_ON, VLEVEL_M, "Weigt Scale : %d\r\n", sts_sensor_data.weight_scale_value);
#endif
APP_LOG(TS_ON, VLEVEL_M, "VDDA: %d\r\n", batteryLevel); APP_LOG(TS_ON, VLEVEL_M, "VDDA: %d\r\n", batteryLevel);
APP_LOG(TS_ON, VLEVEL_M, "temp: %d\r\n", (int16_t)(sensor_data.temperature)); APP_LOG(TS_ON, VLEVEL_M, "temp: %d\r\n", (int16_t)(sensor_data.temperature));
#endif
AppData.Port = LORAWAN_USER_APP_PORT; AppData.Port = LORAWAN_USER_APP_PORT;
#ifdef CAYENNE_LPP #ifdef CAYENNE_LPP
@ -629,8 +619,8 @@ static void SendTxData(void)
{ {
AppData.Buffer[i++] = 0; AppData.Buffer[i++] = 0;
AppData.Buffer[i++] = 0; AppData.Buffer[i++] = 0;
AppData.Buffer[i++] = (uint8_t)(99*GetBatteryLevel()/255); /* 1 (very low) to 254 (fully charged) */ AppData.Buffer[i++] = 0;
AppData.Buffer[i++] = door_status; AppData.Buffer[i++] = 0;
} }
else else
{ {
@ -647,7 +637,10 @@ static void SendTxData(void)
AppData.Buffer[i++] = (uint8_t)((altitudeGps >> 8) & 0xFF); AppData.Buffer[i++] = (uint8_t)((altitudeGps >> 8) & 0xFF);
AppData.Buffer[i++] = (uint8_t)(altitudeGps & 0xFF); AppData.Buffer[i++] = (uint8_t)(altitudeGps & 0xFF);
} }
#ifdef STS_WS
AppData.Buffer[i++] = (uint8_t)(sts_sensor_data.weight_scale_value >> 8& 0xFF);
AppData.Buffer[i++] = (uint8_t)(sts_sensor_data.weight_scale_value & 0xFF);
#endif
AppData.BufferSize = i; AppData.BufferSize = i;
#endif /* CAYENNE_LPP */ #endif /* CAYENNE_LPP */
@ -685,13 +678,12 @@ static void SendTxData(void)
static void OnTxTimerEvent(void *context) static void OnTxTimerEvent(void *context)
{ {
/* USER CODE BEGIN OnTxTimerEvent_1 */ /* USER CODE BEGIN OnTxTimerEvent_1 */
UTIL_SEQ_SetTask((1 << CFG_SEQ_Task_YunhornSTSP1CheckingEvent), CFG_SEQ_Prio_0);
if (door_changed_flag ==1) /* USER CODE END OnTxTimerEvent_1 */
{
door_changed_flag =0;
UTIL_SEQ_SetTask((1 << CFG_SEQ_Task_LoRaSendOnTxTimerOrButtonEvent), CFG_SEQ_Prio_0); UTIL_SEQ_SetTask((1 << CFG_SEQ_Task_LoRaSendOnTxTimerOrButtonEvent), CFG_SEQ_Prio_0);
//UTIL_TIMER_Start(&TxTimer);
} /*Wait for next tx slot*/
UTIL_TIMER_Start(&TxTimer);
/* USER CODE BEGIN OnTxTimerEvent_2 */ /* USER CODE BEGIN OnTxTimerEvent_2 */
/* USER CODE END OnTxTimerEvent_2 */ /* USER CODE END OnTxTimerEvent_2 */