good control projector with power on/off/next/first
This commit is contained in:
parent
35222f4c42
commit
190a3c652d
|
|
@ -17,6 +17,13 @@
|
|||
#include <string.h>
|
||||
#include <stdbool.h>
|
||||
|
||||
#define RF_Read_TIM_RCC RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM3,ENABLE)
|
||||
#define RF_Read_TIM_TIMx TIM3
|
||||
#define RF_Read_TIM_IRQn TIM3_IRQn
|
||||
#define RF_Read_TIM_Priority_1 2
|
||||
#define RF_Read_TIM_Priority_2 2
|
||||
#define RF_Read_TIM_IRQHandler TIM3_IRQHandler
|
||||
|
||||
/*********433 DATA GPIO**********/
|
||||
|
||||
// 433数据输入
|
||||
|
|
@ -25,9 +32,22 @@
|
|||
#define DATA_433_GPIO_PORT GPIOA
|
||||
#define DATA_433_GPIO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE();
|
||||
#endif
|
||||
|
||||
/*******************************/
|
||||
|
||||
void EV1527_Init(void);
|
||||
void RF_Signal_Decode(void);
|
||||
// void Delay_us(uint32_t cnt);
|
||||
|
||||
void STS_RF_write_send_1(void);
|
||||
void STS_RF_write_send_0(void);
|
||||
void STS_RF_write_send_leading(void);
|
||||
|
||||
void STS_RF_write_send_ending(void);
|
||||
void STS_RF_Send_Multi_Times(uint8_t *rf_payload, uint8_t rf_length, uint8_t mt);
|
||||
void STS_RF_Send_Button_Multi_Times(uint8_t *rf_payload, uint8_t one_button, uint8_t rf_length, uint8_t mt);
|
||||
void STS_RF_Send_AddressBit_and_CmdBit(uint8_t *rf_payload, uint8_t rf_length);
|
||||
|
||||
|
||||
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -90,6 +90,9 @@ void Error_Handler(void);
|
|||
#define USART1_TX_GPIO_Port GPIOB
|
||||
|
||||
#ifdef RC
|
||||
#define TIM1_PRESCALER_VALUE 47L // 1 us for stm32wle5xx 48Mhz
|
||||
#define TIM1_PERIOD_VALUE 79L // 80 us
|
||||
|
||||
// REMOTE CONTROL EV1527/HS1527 LORA-WAN RELAY NODE
|
||||
|
||||
#define RC_K0_Pin GPIO_PIN_5
|
||||
|
|
@ -159,9 +162,16 @@ void Error_Handler(void);
|
|||
#define RC_SHOW_30S 0x0C // 1100
|
||||
|
||||
|
||||
#define DATA_433_PIN GPIO_PIN_7
|
||||
#define DATA_433_GPIO_PORT GPIOA
|
||||
#define DATA_433_GPIO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE();
|
||||
#define DATA_433_PIN GPIO_PIN_9
|
||||
#define DATA_433_GPIO_PORT GPIOA
|
||||
#define DATA_433_GPIO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE();
|
||||
|
||||
#define RF_Send_GPIO_Port GPIOA
|
||||
#define RF_Send_GPIO_Pin GPIO_PIN_8
|
||||
|
||||
#define RF_Receive_GPIO_Port GPIOA
|
||||
#define RF_Receive_GPIO_Pin GPIO_PIN_9
|
||||
#define RF_Receive_GPIO_CLK_EN() __HAL_RCC_GPIOA_CLK_ENABLE();
|
||||
|
||||
#endif
|
||||
|
||||
|
|
|
|||
|
|
@ -54,7 +54,7 @@
|
|||
/*#define HAL_SMBUS_MODULE_ENABLED */
|
||||
/*#define HAL_SPI_MODULE_ENABLED */
|
||||
#define HAL_SUBGHZ_MODULE_ENABLED
|
||||
/*#define HAL_TIM_MODULE_ENABLED */
|
||||
#define HAL_TIM_MODULE_ENABLED
|
||||
#define HAL_UART_MODULE_ENABLED
|
||||
/*#define HAL_USART_MODULE_ENABLED */
|
||||
/*#define HAL_WWDG_MODULE_ENABLED */
|
||||
|
|
|
|||
|
|
@ -7,11 +7,11 @@
|
|||
* @copyright Copyright (c) 2024
|
||||
*
|
||||
*/
|
||||
#include "EV1527.h"
|
||||
|
||||
#include "ev1527.h"
|
||||
volatile uint32_t TIM1_cnt=0;
|
||||
// 定时周期
|
||||
#define TIME_CYCLE 80
|
||||
|
||||
// #define TIME_CYCLE 20
|
||||
// 定义引导码的最小和最大持续时间（单位：us）
|
||||
#define MIN_LEAD_CODE (5600 / TIME_CYCLE)
|
||||
#define MAX_LEAD_CODE (16000 / TIME_CYCLE)
|
||||
|
|
@ -74,11 +74,10 @@ void EV1527_Init(void)
|
|||
// 配置上拉输入
|
||||
GPIO_InitStruct.Pin = DATA_433_PIN;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
|
||||
GPIO_InitStruct.Pull = GPIO_PULLUP;
|
||||
//GPIO_InitStruct.Pull = GPIO_PULLUP;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
||||
HAL_GPIO_Init(DATA_433_GPIO_PORT, &GPIO_InitStruct);
|
||||
}
|
||||
|
||||
/**----------------------------------------------------------------------------------------------**
|
||||
**函数名 ：RF信号解码函数
|
||||
**功能说明：解码从433MHz接收到的信号，并根据解码结果执行相应功能
|
||||
|
|
@ -178,6 +177,106 @@ void RF_Signal_Decode(void)
|
|||
}
|
||||
}
|
||||
|
||||
#if 0
|
||||
/**----------------------------------------------------------------------------------------------**
|
||||
**函数名 ：RF信号解码函数
|
||||
**功能说明：解码从433MHz接收到的信号，并根据解码结果执行相应功能
|
||||
**调用说明：80us调用一次
|
||||
**----------------------------------------------------------------------------------------------**/
|
||||
void RF_Signal_Decode(void)
|
||||
{
|
||||
switch (RF_Decode_State)
|
||||
{
|
||||
case LEAD_CODE: // 引导码
|
||||
// 判断是否低电平
|
||||
if (HAL_GPIO_ReadPin(DATA_433_GPIO_PORT, DATA_433_PIN) == GPIO_PIN_RESET)
|
||||
{
|
||||
Lead_Code_Count++;
|
||||
}
|
||||
else // 高电平判断范围
|
||||
{
|
||||
// 判断引导码范围是否合法
|
||||
if (Lead_Code_Count >= MIN_LEAD_CODE && Lead_Code_Count <= MAX_LEAD_CODE)
|
||||
{
|
||||
Lead_Code_Count = 0;
|
||||
Reset_Decode_Parameters(); // 重置解码参数
|
||||
RF_Decode_State = HIGH_BIT; // 进入高位数据位判断状态
|
||||
}
|
||||
else
|
||||
{
|
||||
Reset_Decode_Parameters(); // 引导码范围不合法，重置解码参数
|
||||
}
|
||||
}
|
||||
break;
|
||||
|
||||
case HIGH_BIT:
|
||||
// 判断是否高电平
|
||||
if (HAL_GPIO_ReadPin(DATA_433_GPIO_PORT, DATA_433_PIN) == GPIO_PIN_SET)
|
||||
{
|
||||
High_Bit_Count++;
|
||||
}
|
||||
else // 低电平判断范围
|
||||
{
|
||||
// 判断高位数据位范围是否合法
|
||||
if (High_Bit_Count >= MIN_BIT_DURATION && High_Bit_Count <= MAX_BIT_DURATION)
|
||||
{
|
||||
High_Bit_Duration = High_Bit_Count; // 保存计数值，用于区分0和1
|
||||
High_Bit_Count = 0;
|
||||
RF_Decode_State = LOW_BIT; // 进入低位数据位判断状态
|
||||
}
|
||||
else
|
||||
{
|
||||
Reset_Decode_Parameters(); // 高位数据位范围不合法，重置解码参数
|
||||
}
|
||||
}
|
||||
break;
|
||||
|
||||
case LOW_BIT:
|
||||
// 判断是否低电平
|
||||
if (HAL_GPIO_ReadPin(DATA_433_GPIO_PORT, DATA_433_PIN) == GPIO_PIN_RESET)
|
||||
{
|
||||
Low_Bit_Count++;
|
||||
}
|
||||
else // 高电平判断范围
|
||||
{
|
||||
// 判断低位数据位范围是否合法
|
||||
if (Low_Bit_Count >= MIN_BIT_DURATION && Low_Bit_Count <= MAX_BIT_DURATION)
|
||||
{
|
||||
Low_Bit_Duration = Low_Bit_Count; // 保存计数值，用于区分0和1
|
||||
Low_Bit_Count = 0;
|
||||
RF_Decode_State = DATA_PROCESS; // 进入数据处理状态
|
||||
}
|
||||
else
|
||||
{
|
||||
Reset_Decode_Parameters(); // 低位数据位范围不合法，重置解码参数
|
||||
}
|
||||
}
|
||||
break;
|
||||
|
||||
case DATA_PROCESS:
|
||||
Decode_Data(); // 解码数据
|
||||
if (Received_Byte_Count == 3)
|
||||
{
|
||||
// 接收到全部数据，包括地址和数据
|
||||
RF_Decode_State = FUNCTION_PROCESS;
|
||||
}
|
||||
else
|
||||
{ // 数据没接收完
|
||||
RF_Decode_State = HIGH_BIT; // 继续解码数据
|
||||
}
|
||||
break;
|
||||
|
||||
case FUNCTION_PROCESS:
|
||||
Execute_Function(); // 执行功能
|
||||
Reset_Decode_Parameters(); // 重置解码参数
|
||||
break;
|
||||
|
||||
default:
|
||||
Reset_Decode_Parameters(); // 默认状态，重置解码参数
|
||||
break;
|
||||
}
|
||||
}
|
||||
#endif
|
||||
/**----------------------------------------------------------------------------------------------**
|
||||
**函数名 ：Reset_Decode_Parameters
|
||||
**功能说明：重置解码参数，用于开始新的解码周期
|
||||
|
|
@ -274,3 +373,147 @@ void Execute_Function(void)
|
|||
break;
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
uint8_t RF;
|
||||
uint8_t decode_ok; //解码成功
|
||||
uint8_t hh_w,ll_w; //高,低电平宽度
|
||||
uint8_t ma_x; //接收到第几位编码了
|
||||
|
||||
uint8_t bma1,bma2,bma3,bma4; //用于接收过程存放遥控编码，编码比较两次，这是第一次
|
||||
uint8_t mma1,mma2,mma3,mma4;
|
||||
uint8_t mmb1,mmb2,mmb3,mmb4; //用于接收过程存放遥控编码，第二次
|
||||
//extern uint8_t mmbl,mmb2,mmb3,mmb4;
|
||||
uint8_t rf_okl,rf_ok2,rf_ok; //解码过程中的临时接收成功标志,接收到一个完整的遥控命令后置1,通知解码程序可以解码了
|
||||
|
||||
uint8_t old_rc5; //保存上一次查询到的电平状态
|
||||
uint8_t tb_ok; //接收到同步的马时置1
|
||||
uint8_t D0,D1,D2,D3;
|
||||
uint16_t s,s1;
|
||||
|
||||
uint8_t bt_auto; //自动设置遥控接收波特率标志
|
||||
extern uint8_t rf_data[4];
|
||||
#if 0
|
||||
#define BIT1_HIGH_US 1000 // duty cycle =
|
||||
#define BIT1_LOW_US 500 //
|
||||
#define BIT0_HIGH_US 400
|
||||
#define BIT0_LOW_US 1100
|
||||
#endif
|
||||
|
||||
#define BIT1_HIGH_US 1000 // duty cycle =
|
||||
#define BIT1_LOW_US 500 //
|
||||
#define BIT0_HIGH_US 250
|
||||
#define BIT0_LOW_US 1200
|
||||
#define ENDING_LOW_US 200
|
||||
#define ENDING_HIGH_US 12000
|
||||
|
||||
//#define CNT_SHORT_US 305 // 305 usec
|
||||
#define LEADING_MS 12 // 8 msec
|
||||
void STS_RF_write_send_1(void)
|
||||
{
|
||||
HAL_GPIO_WritePin(RF_Send_GPIO_Port, RF_Send_GPIO_Pin, SET);
|
||||
|
||||
HAL_Delay_Us(BIT1_HIGH_US);
|
||||
|
||||
HAL_GPIO_WritePin(RF_Send_GPIO_Port, RF_Send_GPIO_Pin, RESET);
|
||||
HAL_Delay_Us(BIT1_LOW_US);
|
||||
}
|
||||
|
||||
void STS_RF_write_send_0(void)
|
||||
{
|
||||
HAL_GPIO_WritePin(RF_Send_GPIO_Port, RF_Send_GPIO_Pin, SET);
|
||||
HAL_Delay_Us(BIT0_HIGH_US);
|
||||
HAL_GPIO_WritePin(RF_Send_GPIO_Port, RF_Send_GPIO_Pin, RESET);
|
||||
HAL_Delay_Us(BIT0_LOW_US);
|
||||
}
|
||||
|
||||
void STS_RF_write_send_leading(void)
|
||||
{
|
||||
#if 0
|
||||
STS_RF_write_send_1();
|
||||
STS_RF_write_send_0();
|
||||
STS_RF_write_send_1();
|
||||
#endif
|
||||
|
||||
HAL_GPIO_WritePin(RF_Send_GPIO_Port, RF_Send_GPIO_Pin, RESET);
|
||||
//HAL_Delay(CNT_LONG_MS); // 8 msec long low level
|
||||
HAL_Delay_Us(LEADING_MS*1000);
|
||||
HAL_Delay_Us(LEADING_MS*1000);
|
||||
HAL_Delay_Us(LEADING_MS*1000);
|
||||
}
|
||||
|
||||
void STS_RF_write_send_ending(void)
|
||||
{
|
||||
HAL_GPIO_WritePin(RF_Send_GPIO_Port, RF_Send_GPIO_Pin, SET);
|
||||
HAL_Delay_Us(ENDING_HIGH_US);
|
||||
HAL_GPIO_WritePin(RF_Send_GPIO_Port, RF_Send_GPIO_Pin, RESET);
|
||||
HAL_Delay_Us(ENDING_LOW_US);
|
||||
}
|
||||
|
||||
void STS_RF_Send_Button_Multi_Times(uint8_t *rf_payload, uint8_t one_button, uint8_t rf_length, uint8_t mt)
|
||||
{
|
||||
// normally, send 5-8 cycles of same address and cmd code
|
||||
uint8_t push_button_cmd = one_button;
|
||||
|
||||
for (uint8_t i=0;i< mt;i++)
|
||||
{
|
||||
rf_payload[2] |= ((push_button_cmd));
|
||||
printf("%d : Address=%02X:%02X:%01x CMD=%01X\r\n",i,
|
||||
rf_payload[0], rf_payload[1], rf_payload[2]&0xF0, push_button_cmd);
|
||||
|
||||
STS_RF_Send_AddressBit_and_CmdBit(rf_payload, rf_length);
|
||||
|
||||
rf_payload[2] &= 0xF0; // cmd set to 0
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
void STS_RF_Send_Multi_Times(uint8_t *rf_payload, uint8_t rf_length, uint8_t mt)
|
||||
{
|
||||
// normally, send 5-8 cycles of same address and cmd code
|
||||
// uint8_t push_button_cmd = 0x01;
|
||||
|
||||
|
||||
|
||||
for (uint8_t i=0;i< mt;i++)
|
||||
{
|
||||
rf_payload[2] |= ((i+1) <<4);
|
||||
printf("%d : Address=%02X:%02X:%01x CMD=%01X\r\n",i, rf_payload[0],rf_payload[1],rf_payload[2]&0x0F, (rf_payload[2]>>4)&0x0F);
|
||||
|
||||
STS_RF_Send_AddressBit_and_CmdBit(rf_payload, rf_length);
|
||||
|
||||
rf_payload[2] &= 0x0F; // cmd set to 0
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
void STS_RF_Send_AddressBit_and_CmdBit(uint8_t *rf_payload, uint8_t rf_length)
|
||||
{
|
||||
// send the combined address code and cmd code
|
||||
// 20 bit address + 4 bit cmd code == 24 bits == 3 bytes
|
||||
|
||||
// send leading or sync signal for receiver to sync the RX clock
|
||||
// printf("leading sync signal ...\r\n");
|
||||
STS_RF_write_send_leading();
|
||||
|
||||
// printf("address bits and cmd bits ...\r\n");
|
||||
// send address and cmd code
|
||||
for (uint8_t i=0; i < rf_length; i++)
|
||||
{
|
||||
for (uint8_t j=0; j < 8; j++)
|
||||
{
|
||||
// if (0x01&(rf_payload[i]>>j)) // TODO XXXX if (0x80&(rf_payload[i]<<j))
|
||||
if (0x80&(rf_payload[i]<<j))
|
||||
{
|
||||
STS_RF_write_send_1();
|
||||
} else {
|
||||
STS_RF_write_send_0();
|
||||
}
|
||||
}
|
||||
}
|
||||
STS_RF_write_send_ending();
|
||||
printf("ending bits ...\r\n");
|
||||
}
|
||||
|
||||
|
||||
|
||||
|
|
|
|||
|
|
@ -82,23 +82,23 @@ void MX_GPIO_Init(void)
|
|||
GPIO_InitStruct.Pull = GPIO_PULLUP;
|
||||
HAL_GPIO_Init(BUT3_GPIO_Port, &GPIO_InitStruct);
|
||||
|
||||
#ifdef RC
|
||||
#ifdef XRC
|
||||
/*Configure GPIO pins : PBPin PBPin PBPin */
|
||||
GPIO_InitStruct.Pin = RC_K0_Pin|RC_K1_Pin|RC_K2_Pin|RC_K3_Pin|RC_SET_Pin|RC_VT_Pin;
|
||||
GPIO_InitStruct.Pin = RC_K0_Pin|RC_K1_Pin|RC_K2_Pin|RC_K3_Pin;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_PULLDOWN;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
||||
HAL_GPIO_Init(RC_K0_GPIO_Port, &GPIO_InitStruct);
|
||||
|
||||
GPIO_InitStruct.Pin = RC_D0_Pin|RC_D1_Pin|RC_D2_Pin|RC_D3_Pin;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_IT_RISING;
|
||||
GPIO_InitStruct.Pull = GPIO_PULLDOWN;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
|
||||
HAL_GPIO_Init(RC_D0_GPIO_Port, &GPIO_InitStruct);
|
||||
|
||||
GPIO_InitStruct.Pin = RC_D4_Pin|RC_D5_Pin|RC_D6_Pin|RC_D7_Pin;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_IT_RISING;
|
||||
GPIO_InitStruct.Pull = GPIO_PULLDOWN;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
|
||||
HAL_GPIO_Init(RC_D4_GPIO_Port, &GPIO_InitStruct);
|
||||
|
||||
|
|
@ -109,13 +109,27 @@ void MX_GPIO_Init(void)
|
|||
HAL_GPIO_Init(RC_SET_GPIO_Port, &GPIO_InitStruct);
|
||||
|
||||
GPIO_InitStruct.Pin = RC_VT_Pin;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_IT_RISING;
|
||||
GPIO_InitStruct.Pull = GPIO_PULLDOWN;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_IT_RISING_FALLING;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
|
||||
HAL_GPIO_Init(RC_VT_GPIO_Port, &GPIO_InitStruct);
|
||||
|
||||
#endif
|
||||
|
||||
|
||||
GPIO_InitStruct.Pin = RF_Send_GPIO_Pin;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
||||
HAL_GPIO_Init(RF_Send_GPIO_Port, &GPIO_InitStruct);
|
||||
|
||||
GPIO_InitStruct.Pin = RF_Receive_GPIO_Pin;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_IT_RISING_FALLING;
|
||||
GPIO_InitStruct.Pull = GPIO_PULLDOWN;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
||||
HAL_GPIO_Init(RF_Receive_GPIO_Port, &GPIO_InitStruct);
|
||||
|
||||
|
||||
#ifdef L8
|
||||
/*Configure GPIO pins : PAPin PAPin */
|
||||
GPIO_InitStruct.Pin = TOF_INT_EXTI_PIN;
|
||||
|
|
@ -159,26 +173,26 @@ void MX_GPIO_Init(void)
|
|||
|
||||
#endif
|
||||
/* EXTI interrupt init*/
|
||||
HAL_NVIC_SetPriority(EXTI0_IRQn, 0, 0);
|
||||
HAL_NVIC_SetPriority(EXTI0_IRQn, 2, 0);
|
||||
HAL_NVIC_EnableIRQ(EXTI0_IRQn);
|
||||
|
||||
HAL_NVIC_SetPriority(EXTI1_IRQn, 0, 0);
|
||||
HAL_NVIC_SetPriority(EXTI1_IRQn, 2, 0);
|
||||
HAL_NVIC_EnableIRQ(EXTI1_IRQn);
|
||||
|
||||
HAL_NVIC_SetPriority(EXTI2_IRQn, 0, 0);
|
||||
HAL_NVIC_SetPriority(EXTI2_IRQn, 2, 0);
|
||||
HAL_NVIC_EnableIRQ(EXTI2_IRQn);
|
||||
|
||||
HAL_NVIC_SetPriority(EXTI3_IRQn, 0, 0);
|
||||
HAL_NVIC_SetPriority(EXTI3_IRQn, 2, 0);
|
||||
HAL_NVIC_EnableIRQ(EXTI3_IRQn);
|
||||
|
||||
HAL_NVIC_SetPriority(EXTI4_IRQn, 0, 0);
|
||||
HAL_NVIC_SetPriority(EXTI4_IRQn, 2, 0);
|
||||
HAL_NVIC_EnableIRQ(EXTI4_IRQn);
|
||||
|
||||
|
||||
HAL_NVIC_SetPriority(EXTI9_5_IRQn, 0, 0);
|
||||
HAL_NVIC_SetPriority(EXTI9_5_IRQn, 2, 0);
|
||||
HAL_NVIC_EnableIRQ(EXTI9_5_IRQn);
|
||||
|
||||
HAL_NVIC_SetPriority(EXTI15_10_IRQn, 0, 0);
|
||||
HAL_NVIC_SetPriority(EXTI15_10_IRQn, 2, 0);
|
||||
HAL_NVIC_EnableIRQ(EXTI15_10_IRQn);
|
||||
|
||||
|
||||
|
|
|
|||
283
Core/Src/main.c
283
Core/Src/main.c
|
|
@ -23,6 +23,7 @@
|
|||
#include "usart.h"
|
||||
#include "stdio.h"
|
||||
#include "ev1527.h"
|
||||
#include "tim.h"
|
||||
/* Private includes ----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN Includes */
|
||||
// #include "i2c.h"
|
||||
|
|
@ -31,6 +32,54 @@
|
|||
// #include "sts_aq_o3.h"
|
||||
/* Private typedef -----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN PTD */
|
||||
TIM_HandleTypeDef htim1;
|
||||
|
||||
#if 1
|
||||
/* Captured Values */
|
||||
uint32_t uwIC2Value1 = 0;
|
||||
uint32_t uwIC2Value2 = 0;
|
||||
uint32_t uwDiffCapture = 0;
|
||||
|
||||
/* Capture index */
|
||||
uint16_t uhCaptureIndex = 0;
|
||||
|
||||
/* Frequency Value */
|
||||
uint32_t uwFrequency = 0;
|
||||
#endif
|
||||
|
||||
/* USER CODE BEGIN PV */
|
||||
#if 1
|
||||
/* Captured Value */
|
||||
uint32_t uwIC2Value = 0;
|
||||
/* Duty Cycle Value */
|
||||
uint32_t uwDutyCycle = 0;
|
||||
/* Frequency Value */
|
||||
// uint32_t uwFrequency = 0;
|
||||
#endif
|
||||
|
||||
#if 1
|
||||
uint32_t capture_Buf[3]={0}; // counter
|
||||
uint8_t capture_Cnt=0; // state
|
||||
uint32_t high_time, low_time; // high level duration, low level duration
|
||||
#endif
|
||||
//uint8_t rf_payload[3]={0xF8,0xCD,0x07}, rf_length=3;
|
||||
|
||||
uint8_t rf_payload[3]={0x1F,0xB3,0xE0}, rf_length=3;
|
||||
enum rf_cmd_enum
|
||||
{ BUTTON_NONE=0,
|
||||
BUTTON_ON,
|
||||
BUTTON_OFF,
|
||||
BUTTON_FIRST,
|
||||
BUTTON_NEXT,
|
||||
BUTTON_5S,
|
||||
BUTTON_10S,
|
||||
BUTTON_15S,
|
||||
BUTTON_30S,
|
||||
BUTTON_9,BUTTON_10,BUTTON_11,BUTTON_12,BUTTON_13,BUTTON_14,BUTTON_15,
|
||||
};
|
||||
|
||||
uint8_t rf_cmd[16]={0x00, 0x8,0xC,0x4,0x6,0x1,0x9,0x2,0x3}; // cmd 1 = 1, cmd2=4, cmd3=3, cmd4=2
|
||||
|
||||
void sts_rc_key(uint8_t key);
|
||||
void sts_rc_decoder(void);
|
||||
uint8_t sts_rc_decodedx(void);
|
||||
|
|
@ -110,24 +159,118 @@ int main(void)
|
|||
|
||||
|
||||
|
||||
MX_LoRaWAN_Init();
|
||||
// MX_LoRaWAN_Init();
|
||||
/* USER CODE BEGIN 2 */
|
||||
MX_USART2_UART_Init();
|
||||
|
||||
|
||||
MX_USART1_UART_Init();
|
||||
|
||||
MX_TIM1_Init();
|
||||
|
||||
printf("start \r\n");
|
||||
|
||||
EV1527_Init();
|
||||
|
||||
#if 0
|
||||
/*## Start the Input Capture in interrupt mode ##########################*/
|
||||
if (HAL_TIM_IC_Start_IT(&htim1, TIM_CHANNEL_2) != HAL_OK)
|
||||
{
|
||||
printf("tim1 ch2 start IT error \r\n");
|
||||
/* Starting Error */
|
||||
Error_Handler();
|
||||
}
|
||||
#endif
|
||||
|
||||
|
||||
|
||||
#if 0
|
||||
while (0)
|
||||
{
|
||||
HAL_Delay_Us(1000);
|
||||
HAL_GPIO_WritePin(GPIOA, GPIO_PIN_8, GPIO_PIN_SET);
|
||||
HAL_Delay_Us(1000);
|
||||
HAL_GPIO_WritePin(GPIOA, GPIO_PIN_8, GPIO_PIN_RESET);
|
||||
}
|
||||
#endif
|
||||
/* ---------------------------------------------------------------------------
|
||||
TIM1 configuration: PWM Input mode
|
||||
|
||||
In this example TIM1 input clock (TIM1CLK) is set to APB2 clock (PCLK2),
|
||||
since APB2 prescaler is 1.
|
||||
TIM1CLK = PCLK2
|
||||
PCLK2 = HCLK
|
||||
=> TIM1CLK = HCLK = SystemCoreClock
|
||||
|
||||
External Signal Frequency = TIM1 counter clock / TIM1_CCR2 in Hz.
|
||||
|
||||
External Signal DutyCycle = (TIM1_CCR1*100)/(TIM1_CCR2) in %.
|
||||
|
||||
--------------------------------------------------------------------------- */
|
||||
#if 0
|
||||
/*## Start the Input Capture in interrupt mode ##########################*/
|
||||
if (HAL_TIM_IC_Start_IT(&htim1, TIM_CHANNEL_2) != HAL_OK)
|
||||
{
|
||||
/* Starting Error */
|
||||
Error_Handler();
|
||||
}
|
||||
#endif
|
||||
/*## Start the Input Capture in interrupt mode ##########################*/
|
||||
if (HAL_TIM_IC_Start_IT(&htim1, TIM_CHANNEL_1) != HAL_OK)
|
||||
{
|
||||
/* Starting Error */
|
||||
Error_Handler();
|
||||
}
|
||||
|
||||
|
||||
|
||||
while(1)
|
||||
{
|
||||
switch(capture_Cnt) {
|
||||
|
||||
case 0:
|
||||
capture_Cnt ++;
|
||||
printf("cc: %ld ", capture_Cnt);
|
||||
TIM_SET_CAPTUREPOLARITY(&htim1, TIM_CHANNEL_2, TIM_INPUTCHANNELPOLARITY_RISING);
|
||||
HAL_TIM_IC_Start_IT(&htim1, TIM_CHANNEL_2); // or _HAL_TIM_ENABLE(&htim1);
|
||||
break;
|
||||
|
||||
case 3:
|
||||
high_time = capture_Buf[1] - capture_Buf[0]; // high time
|
||||
printf("ht: %ld ", high_time);
|
||||
// HAL_UART_Transmit(&huart2, (uint8_t*)high_time, 1, 0xffff); // print high time
|
||||
HAL_Delay(1000); //delay 1 s
|
||||
capture_Cnt = 0; // clear flag
|
||||
break;
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
|
||||
while(1)
|
||||
{
|
||||
// printf("uwF=%ld Hz\r\n", uwFrequency);
|
||||
// STS_RF_Send_Multi_Times(payload, 3, 5);
|
||||
}
|
||||
|
||||
|
||||
#if 0
|
||||
RF_Read_TIM_init();
|
||||
|
||||
|
||||
uint8_t vt=0;
|
||||
uint8_t codex=0;
|
||||
uint32_t k=0;
|
||||
#endif
|
||||
|
||||
|
||||
#if 0
|
||||
EV1527_Init();
|
||||
while(1)
|
||||
{
|
||||
RF_Signal_Decode();
|
||||
HAL_Delay(1/20);
|
||||
}
|
||||
#endif
|
||||
|
||||
#if 0
|
||||
// for(i=0; i<16; i++)
|
||||
|
|
@ -165,17 +308,20 @@ int main(void)
|
|||
|
||||
|
||||
#if 0
|
||||
uint8_t i;
|
||||
while (1)
|
||||
{
|
||||
for(i=0; i<16; i++)
|
||||
for(i=0; i<6; i++)
|
||||
{
|
||||
printf("\r\n Remote control Key down =%d \r\n", i);
|
||||
//sts_rc_key(i);
|
||||
sts_rc_key(i);
|
||||
HAL_Delay(3000);
|
||||
|
||||
printf("\r\n Remote control decoded: ");
|
||||
sts_rc_decoder();
|
||||
printf("\r\n Remote control decoded: %02x \r\n", codexx);
|
||||
// sts_rc_decoder();
|
||||
|
||||
HAL_Delay(1000);
|
||||
HAL_Delay(3000);
|
||||
codexx=0;
|
||||
}
|
||||
|
||||
HAL_Delay(2000);
|
||||
|
|
@ -199,8 +345,64 @@ int main(void)
|
|||
/* USER CODE END 3 */
|
||||
}
|
||||
|
||||
|
||||
#if 0
|
||||
void RF_Read_TIM_init(void)
|
||||
{
|
||||
TIM_Base_InitTypeDef TIM_Base_Init_Struct;
|
||||
|
||||
NVIC_InitTypeDef NVIC_Init_Struct;
|
||||
RF_Read_TIM_RCC;
|
||||
TIM_Base_Init_Struct.TIM_ClockDivision = TIM_CKD_DIV1;
|
||||
TIM_Base_Init_Struct.TIM_CounterMode = TIM_CounterMode_Up;
|
||||
// every int trigger time = [(Tim_Period+1)*(TIM_Prescaler+1)/(SystemCoreClock)] (s)
|
||||
TIM_Base_Init_Struct.Tim_Prescalar = 48 -1;
|
||||
TIM_Base_Init_Struct.Tim_Period = 0xffff -1;
|
||||
TIM_Base_Init_Struct.TIM_RepetitionCounter = 0;
|
||||
TIM_TimeBaseInit(RF_Read_TIM_TIMx, &TIM_Init_Struct);
|
||||
TIM_ITConfig(RF_Read_TIM_TIMx, TIM_IT_Update, ENABLE);
|
||||
}
|
||||
#endif
|
||||
|
||||
void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin)
|
||||
{
|
||||
uint8_t single_button =0;
|
||||
switch(GPIO_Pin)
|
||||
{
|
||||
case BUT1_Pin:
|
||||
printf("Button 1 pressed, sending cmd #1 \r\n");
|
||||
//STS_RF_Send_AddressBit_and_CmdBit(rf_payload, rf_length);
|
||||
// STS_RF_Send_Multi_Times(rf_payload, 3, 8);
|
||||
single_button = rf_cmd[BUTTON_ON];
|
||||
STS_RF_Send_Button_Multi_Times(rf_payload, single_button, 3, 8);
|
||||
break;
|
||||
|
||||
case BUT2_Pin:
|
||||
printf("Button 2 pressed, sending cmd #2 \r\n");
|
||||
single_button = rf_cmd[BUTTON_OFF];
|
||||
// STS_RF_Send_Multi_Times(rf_payload, 3, 5);
|
||||
STS_RF_Send_Button_Multi_Times(rf_payload, single_button, 3, 8);
|
||||
break;
|
||||
|
||||
case BUT3_Pin:
|
||||
printf("Button 3 pressed, sending cmd #3 \r\n");
|
||||
single_button = rf_cmd[BUTTON_NEXT];
|
||||
// STS_RF_Send_Multi_Times(rf_payload, 3, 5);
|
||||
STS_RF_Send_Button_Multi_Times(rf_payload, single_button, 3, 8);
|
||||
break;
|
||||
|
||||
|
||||
case DATA_433_PIN:
|
||||
|
||||
RF_Signal_Decode();
|
||||
break;
|
||||
|
||||
default:
|
||||
break;
|
||||
}
|
||||
|
||||
#if 0
|
||||
codexx =0;
|
||||
switch (GPIO_Pin)
|
||||
{
|
||||
case RC_D0_Pin:
|
||||
|
|
@ -219,7 +421,7 @@ void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin)
|
|||
codexx |= (HAL_GPIO_ReadPin(RC_D3_GPIO_Port, RC_D3_Pin)<<3);
|
||||
printf("[3]=%02x ",codexx);
|
||||
break;
|
||||
|
||||
#if 0
|
||||
case RC_D4_Pin:
|
||||
codexx |= (HAL_GPIO_ReadPin(RC_D4_GPIO_Port, RC_D4_Pin)<<4);
|
||||
printf("[4]=%02x ",codexx);
|
||||
|
|
@ -236,6 +438,7 @@ void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin)
|
|||
codexx |= (HAL_GPIO_ReadPin(RC_D7_GPIO_Port, RC_D7_Pin)<<7);
|
||||
printf("[7]=%02x ",codexx);
|
||||
break;
|
||||
#endif
|
||||
case RC_VT_Pin:
|
||||
code_vt = (HAL_GPIO_ReadPin(RC_VT_GPIO_Port, RC_VT_Pin));
|
||||
printf("[V]=%02x ",codexx);
|
||||
|
|
@ -244,56 +447,66 @@ void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin)
|
|||
default:
|
||||
break;
|
||||
}
|
||||
#endif
|
||||
|
||||
}
|
||||
|
||||
|
||||
#if 0
|
||||
void sts_rc_key(uint8_t key)
|
||||
{
|
||||
HAL_GPIO_WritePin(RC_K0_GPIO_Port, RC_K0_Pin, GPIO_PIN_SET);
|
||||
HAL_GPIO_WritePin(RC_K1_GPIO_Port, RC_K1_Pin, GPIO_PIN_SET);
|
||||
HAL_GPIO_WritePin(RC_K2_GPIO_Port, RC_K2_Pin, GPIO_PIN_SET);
|
||||
HAL_GPIO_WritePin(RC_K3_GPIO_Port, RC_K3_Pin, GPIO_PIN_SET);
|
||||
HAL_Delay(100);
|
||||
|
||||
switch (key) {
|
||||
case 0:
|
||||
HAL_GPIO_WritePin(RC_K0_GPIO_Port, RC_K0_Pin, GPIO_PIN_RESET);
|
||||
HAL_GPIO_WritePin(RC_K1_GPIO_Port, RC_K1_Pin, GPIO_PIN_RESET);
|
||||
HAL_GPIO_WritePin(RC_K2_GPIO_Port, RC_K2_Pin, GPIO_PIN_RESET);
|
||||
HAL_GPIO_WritePin(RC_K3_GPIO_Port, RC_K3_Pin, GPIO_PIN_RESET);
|
||||
HAL_GPIO_WritePin(RC_K0_GPIO_Port, RC_K0_Pin, GPIO_PIN_SET);
|
||||
HAL_GPIO_WritePin(RC_K1_GPIO_Port, RC_K1_Pin, GPIO_PIN_SET);
|
||||
HAL_GPIO_WritePin(RC_K2_GPIO_Port, RC_K2_Pin, GPIO_PIN_SET);
|
||||
HAL_GPIO_WritePin(RC_K3_GPIO_Port, RC_K3_Pin, GPIO_PIN_SET);
|
||||
break;
|
||||
case 1:
|
||||
HAL_GPIO_WritePin(RC_K0_GPIO_Port, RC_K0_Pin, GPIO_PIN_SET);
|
||||
HAL_GPIO_WritePin(RC_K1_GPIO_Port, RC_K1_Pin, GPIO_PIN_RESET);
|
||||
HAL_GPIO_WritePin(RC_K2_GPIO_Port, RC_K2_Pin, GPIO_PIN_RESET);
|
||||
HAL_GPIO_WritePin(RC_K3_GPIO_Port, RC_K3_Pin, GPIO_PIN_RESET);
|
||||
break;
|
||||
case 2:
|
||||
HAL_GPIO_WritePin(RC_K0_GPIO_Port, RC_K0_Pin, GPIO_PIN_RESET);
|
||||
HAL_GPIO_WritePin(RC_K1_GPIO_Port, RC_K1_Pin, GPIO_PIN_SET);
|
||||
HAL_GPIO_WritePin(RC_K2_GPIO_Port, RC_K2_Pin, GPIO_PIN_RESET);
|
||||
HAL_GPIO_WritePin(RC_K3_GPIO_Port, RC_K3_Pin, GPIO_PIN_RESET);
|
||||
HAL_GPIO_WritePin(RC_K2_GPIO_Port, RC_K2_Pin, GPIO_PIN_SET);
|
||||
HAL_GPIO_WritePin(RC_K3_GPIO_Port, RC_K3_Pin, GPIO_PIN_SET);
|
||||
break;
|
||||
case 2:
|
||||
HAL_GPIO_WritePin(RC_K0_GPIO_Port, RC_K0_Pin, GPIO_PIN_SET);
|
||||
HAL_GPIO_WritePin(RC_K1_GPIO_Port, RC_K1_Pin, GPIO_PIN_RESET);
|
||||
HAL_GPIO_WritePin(RC_K2_GPIO_Port, RC_K2_Pin, GPIO_PIN_SET);
|
||||
HAL_GPIO_WritePin(RC_K3_GPIO_Port, RC_K3_Pin, GPIO_PIN_SET);
|
||||
|
||||
break;
|
||||
case 3:
|
||||
HAL_GPIO_WritePin(RC_K0_GPIO_Port, RC_K0_Pin, GPIO_PIN_SET);
|
||||
HAL_GPIO_WritePin(RC_K0_GPIO_Port, RC_K0_Pin, GPIO_PIN_RESET);
|
||||
HAL_GPIO_WritePin(RC_K1_GPIO_Port, RC_K1_Pin, GPIO_PIN_SET);
|
||||
HAL_GPIO_WritePin(RC_K2_GPIO_Port, RC_K2_Pin, GPIO_PIN_RESET);
|
||||
HAL_GPIO_WritePin(RC_K3_GPIO_Port, RC_K3_Pin, GPIO_PIN_RESET);
|
||||
HAL_GPIO_WritePin(RC_K3_GPIO_Port, RC_K3_Pin, GPIO_PIN_SET);
|
||||
|
||||
break;
|
||||
case 4:
|
||||
HAL_GPIO_WritePin(RC_K0_GPIO_Port, RC_K0_Pin, GPIO_PIN_RESET);
|
||||
HAL_GPIO_WritePin(RC_K1_GPIO_Port, RC_K1_Pin, GPIO_PIN_RESET);
|
||||
HAL_GPIO_WritePin(RC_K2_GPIO_Port, RC_K2_Pin, GPIO_PIN_SET);
|
||||
HAL_GPIO_WritePin(RC_K3_GPIO_Port, RC_K3_Pin, GPIO_PIN_RESET);
|
||||
HAL_GPIO_WritePin(RC_K0_GPIO_Port, RC_K0_Pin, GPIO_PIN_SET);
|
||||
HAL_GPIO_WritePin(RC_K1_GPIO_Port, RC_K1_Pin, GPIO_PIN_SET);
|
||||
HAL_GPIO_WritePin(RC_K2_GPIO_Port, RC_K2_Pin, GPIO_PIN_RESET);
|
||||
HAL_GPIO_WritePin(RC_K3_GPIO_Port, RC_K3_Pin, GPIO_PIN_SET);
|
||||
|
||||
break;
|
||||
case 5:
|
||||
HAL_GPIO_WritePin(RC_K0_GPIO_Port, RC_K0_Pin, GPIO_PIN_SET);
|
||||
HAL_GPIO_WritePin(RC_K1_GPIO_Port, RC_K1_Pin, GPIO_PIN_RESET);
|
||||
HAL_GPIO_WritePin(RC_K2_GPIO_Port, RC_K2_Pin, GPIO_PIN_SET);
|
||||
HAL_GPIO_WritePin(RC_K3_GPIO_Port, RC_K3_Pin, GPIO_PIN_RESET);
|
||||
HAL_GPIO_WritePin(RC_K0_GPIO_Port, RC_K0_Pin, GPIO_PIN_RESET);
|
||||
HAL_GPIO_WritePin(RC_K1_GPIO_Port, RC_K1_Pin, GPIO_PIN_SET);
|
||||
HAL_GPIO_WritePin(RC_K2_GPIO_Port, RC_K2_Pin, GPIO_PIN_RESET);
|
||||
HAL_GPIO_WritePin(RC_K3_GPIO_Port, RC_K3_Pin, GPIO_PIN_SET);
|
||||
|
||||
break;
|
||||
case 6:
|
||||
HAL_GPIO_WritePin(RC_K0_GPIO_Port, RC_K0_Pin, GPIO_PIN_RESET);
|
||||
HAL_GPIO_WritePin(RC_K1_GPIO_Port, RC_K1_Pin, GPIO_PIN_SET);
|
||||
HAL_GPIO_WritePin(RC_K2_GPIO_Port, RC_K2_Pin, GPIO_PIN_SET);
|
||||
HAL_GPIO_WritePin(RC_K3_GPIO_Port, RC_K3_Pin, GPIO_PIN_RESET);
|
||||
HAL_GPIO_WritePin(RC_K0_GPIO_Port, RC_K0_Pin, GPIO_PIN_SET);
|
||||
HAL_GPIO_WritePin(RC_K1_GPIO_Port, RC_K1_Pin, GPIO_PIN_RESET);
|
||||
HAL_GPIO_WritePin(RC_K2_GPIO_Port, RC_K2_Pin, GPIO_PIN_RESET);
|
||||
HAL_GPIO_WritePin(RC_K3_GPIO_Port, RC_K3_Pin, GPIO_PIN_SET);
|
||||
|
||||
break;
|
||||
case 7:
|
||||
|
|
@ -327,7 +540,7 @@ void sts_rc_decoder(void)
|
|||
printf("decoded x= %02x \r\n", codex);
|
||||
|
||||
}
|
||||
|
||||
#endif
|
||||
/**
|
||||
* @brief System Clock Configuration
|
||||
* @retval None
|
||||
|
|
|
|||
|
|
@ -73,6 +73,83 @@ void HAL_MspInit(void)
|
|||
/* USER CODE END MspInit 1 */
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
* @brief TIM_Base MSP Initialization
|
||||
* This function configures the hardware resources used in this example
|
||||
* @param htim_base: TIM_Base handle pointer
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_TIM_Base_MspInit(TIM_HandleTypeDef* htim_base)
|
||||
{
|
||||
GPIO_InitTypeDef GPIO_InitStruct = {0};
|
||||
if(htim_base->Instance==TIM1)
|
||||
{
|
||||
/* USER CODE BEGIN TIM1_MspInit 0 */
|
||||
|
||||
/* USER CODE END TIM1_MspInit 0 */
|
||||
/* Peripheral clock enable */
|
||||
__HAL_RCC_TIM1_CLK_ENABLE();
|
||||
|
||||
__HAL_RCC_GPIOA_CLK_ENABLE();
|
||||
/**TIM1 GPIO Configuration
|
||||
PA9 ------> TIM1_CH2
|
||||
*/
|
||||
GPIO_InitStruct.Pin = GPIO_PIN_9;
|
||||
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
||||
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
||||
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
||||
GPIO_InitStruct.Alternate = GPIO_AF1_TIM1;
|
||||
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
||||
|
||||
/* TIM1 interrupt Init */
|
||||
HAL_NVIC_SetPriority(TIM1_BRK_IRQn, 0, 0);
|
||||
HAL_NVIC_EnableIRQ(TIM1_BRK_IRQn);
|
||||
HAL_NVIC_SetPriority(TIM1_UP_IRQn, 0, 0);
|
||||
HAL_NVIC_EnableIRQ(TIM1_UP_IRQn);
|
||||
HAL_NVIC_SetPriority(TIM1_TRG_COM_IRQn, 0, 0);
|
||||
HAL_NVIC_EnableIRQ(TIM1_TRG_COM_IRQn);
|
||||
HAL_NVIC_SetPriority(TIM1_CC_IRQn, 0, 0);
|
||||
HAL_NVIC_EnableIRQ(TIM1_CC_IRQn);
|
||||
/* USER CODE BEGIN TIM1_MspInit 1 */
|
||||
|
||||
/* USER CODE END TIM1_MspInit 1 */
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief TIM_Base MSP De-Initialization
|
||||
* This function freeze the hardware resources used in this example
|
||||
* @param htim_base: TIM_Base handle pointer
|
||||
* @retval None
|
||||
*/
|
||||
void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef* htim_base)
|
||||
{
|
||||
if(htim_base->Instance==TIM1)
|
||||
{
|
||||
/* USER CODE BEGIN TIM1_MspDeInit 0 */
|
||||
|
||||
/* USER CODE END TIM1_MspDeInit 0 */
|
||||
/* Peripheral clock disable */
|
||||
__HAL_RCC_TIM1_CLK_DISABLE();
|
||||
|
||||
/**TIM1 GPIO Configuration
|
||||
PA9 ------> TIM1_CH2
|
||||
*/
|
||||
HAL_GPIO_DeInit(GPIOA, GPIO_PIN_9);
|
||||
|
||||
/* TIM1 interrupt DeInit */
|
||||
HAL_NVIC_DisableIRQ(TIM1_BRK_IRQn);
|
||||
HAL_NVIC_DisableIRQ(TIM1_UP_IRQn);
|
||||
HAL_NVIC_DisableIRQ(TIM1_TRG_COM_IRQn);
|
||||
HAL_NVIC_DisableIRQ(TIM1_CC_IRQn);
|
||||
/* USER CODE BEGIN TIM1_MspDeInit 1 */
|
||||
|
||||
/* USER CODE END TIM1_MspDeInit 1 */
|
||||
}
|
||||
|
||||
}
|
||||
/* USER CODE BEGIN 1 */
|
||||
|
||||
/* USER CODE END 1 */
|
||||
|
|
|
|||
|
|
@ -20,6 +20,7 @@
|
|||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "main.h"
|
||||
#include "stm32wlxx_it.h"
|
||||
extern volatile uint32_t TIM1_cnt;
|
||||
// #include "app_tof_pin_conf.h"
|
||||
/* Private includes ----------------------------------------------------------*/
|
||||
/* USER CODE BEGIN Includes */
|
||||
|
|
@ -61,6 +62,9 @@ extern SUBGHZ_HandleTypeDef hsubghz;
|
|||
extern DMA_HandleTypeDef hdma_usart2_tx;
|
||||
extern UART_HandleTypeDef huart2;
|
||||
extern UART_HandleTypeDef huart1;
|
||||
|
||||
extern TIM_HandleTypeDef htim1;
|
||||
|
||||
/* USER CODE BEGIN EV */
|
||||
|
||||
// extern DMA_HandleTypeDef hdma_i2c2_rx;
|
||||
|
|
@ -220,7 +224,7 @@ void TAMP_STAMP_LSECSS_SSRU_IRQHandler(void)
|
|||
|
||||
/* USER CODE END TAMP_STAMP_LSECSS_SSRU_IRQn 1 */
|
||||
}
|
||||
|
||||
#if 1
|
||||
/**
|
||||
* @brief This function handles EXTI Line 0 Interrupt.
|
||||
*/
|
||||
|
|
@ -243,18 +247,22 @@ void EXTI1_IRQHandler(void)
|
|||
/* USER CODE BEGIN EXTI1_IRQn 0 */
|
||||
|
||||
/* USER CODE END EXTI1_IRQn 0 */
|
||||
HAL_GPIO_EXTI_IRQHandler(RC_D0_Pin);
|
||||
HAL_GPIO_EXTI_IRQHandler(BUT2_Pin);
|
||||
// HAL_GPIO_EXTI_IRQHandler(RC_D0_Pin);
|
||||
// __HAL_GPIO_EXTI_CLEAR_IT(RC_D0_Pin);
|
||||
/* USER CODE BEGIN EXTI1_IRQn 1 */
|
||||
|
||||
/* USER CODE END EXTI1_IRQn 1 */
|
||||
}
|
||||
|
||||
#endif
|
||||
#if 0
|
||||
void EXTI2_IRQHandler(void)
|
||||
{
|
||||
/* USER CODE BEGIN EXTI1_IRQn 0 */
|
||||
|
||||
/* USER CODE END EXTI1_IRQn 0 */
|
||||
HAL_GPIO_EXTI_IRQHandler(RC_D1_Pin);
|
||||
__HAL_GPIO_EXTI_CLEAR_IT(RC_D1_Pin);
|
||||
/* USER CODE BEGIN EXTI1_IRQn 1 */
|
||||
|
||||
/* USER CODE END EXTI1_IRQn 1 */
|
||||
|
|
@ -266,6 +274,7 @@ void EXTI3_IRQHandler(void)
|
|||
|
||||
/* USER CODE END EXTI1_IRQn 0 */
|
||||
HAL_GPIO_EXTI_IRQHandler(RC_D6_Pin);
|
||||
__HAL_GPIO_EXTI_CLEAR_IT(RC_D6_Pin);
|
||||
/* USER CODE BEGIN EXTI1_IRQn 1 */
|
||||
|
||||
/* USER CODE END EXTI1_IRQn 1 */
|
||||
|
|
@ -281,11 +290,12 @@ void EXTI4_IRQHandler(void)
|
|||
/* USER CODE END EXTI1_IRQn 0 */
|
||||
//HAL_GPIO_EXTI_IRQHandler(TOF_INT_EXTI_PIN);
|
||||
HAL_GPIO_EXTI_IRQHandler(RC_D2_Pin);
|
||||
__HAL_GPIO_EXTI_CLEAR_IT(RC_D2_Pin);
|
||||
/* USER CODE BEGIN EXTI1_IRQn 1 */
|
||||
|
||||
/* USER CODE END EXTI1_IRQn 1 */
|
||||
}
|
||||
|
||||
#endif
|
||||
/**
|
||||
* @brief This function handles DMA1 Channel 4 Interrupt.
|
||||
*/
|
||||
|
|
@ -341,7 +351,7 @@ void DMA1_Channel7_IRQHandler(void)
|
|||
|
||||
/* USER CODE END DMA1_Channel7_IRQn 1 */
|
||||
}
|
||||
|
||||
#if 1
|
||||
/**
|
||||
* @brief This function handles EXTI Lines [9:5] Interrupt.
|
||||
*/
|
||||
|
|
@ -350,14 +360,26 @@ void EXTI9_5_IRQHandler(void)
|
|||
/* USER CODE BEGIN EXTI9_5_IRQn 0 */
|
||||
|
||||
/* USER CODE END EXTI9_5_IRQn 0 */
|
||||
#if 0
|
||||
HAL_GPIO_EXTI_IRQHandler(RC_D4_Pin);
|
||||
HAL_GPIO_EXTI_IRQHandler(RC_D5_Pin);
|
||||
HAL_GPIO_EXTI_IRQHandler(DATA_433_PIN);
|
||||
|
||||
__HAL_GPIO_EXTI_CLEAR_IT(RC_D4_Pin);
|
||||
__HAL_GPIO_EXTI_CLEAR_IT(RC_D5_Pin);
|
||||
#endif
|
||||
|
||||
HAL_GPIO_EXTI_IRQHandler(BUT3_Pin);
|
||||
|
||||
HAL_GPIO_EXTI_IRQHandler(DATA_433_PIN);
|
||||
__HAL_GPIO_EXTI_CLEAR_IT(DATA_433_PIN);
|
||||
|
||||
/* USER CODE BEGIN EXTI9_5_IRQn 1 */
|
||||
|
||||
/* USER CODE END EXTI9_5_IRQn 1 */
|
||||
}
|
||||
|
||||
#endif
|
||||
#if 0
|
||||
/**
|
||||
* @brief This function handles EXTI Lines [15:10] Interrupt.
|
||||
*/
|
||||
|
|
@ -369,12 +391,16 @@ void EXTI15_10_IRQHandler(void)
|
|||
HAL_GPIO_EXTI_IRQHandler(RC_D3_Pin);
|
||||
HAL_GPIO_EXTI_IRQHandler(RC_D7_Pin);
|
||||
HAL_GPIO_EXTI_IRQHandler(RC_VT_Pin);
|
||||
|
||||
__HAL_GPIO_EXTI_CLEAR_IT(RC_D3_Pin);
|
||||
__HAL_GPIO_EXTI_CLEAR_IT(RC_D7_Pin);
|
||||
// __HAL_GPIO_EXTI_CLEAR_IT(RC_VT_Pin);
|
||||
// HAL_GPIO_EXTI_IRQHandler(TOF_INT_EXTI_PIN);
|
||||
/* USER CODE BEGIN EXTI15_10_IRQn 1 */
|
||||
|
||||
/* USER CODE END EXTI15_10_IRQn 1 */
|
||||
}
|
||||
|
||||
#endif
|
||||
/**
|
||||
* @brief This function handles USART2 Interrupt.
|
||||
*/
|
||||
|
|
@ -434,4 +460,39 @@ void SUBGHZ_Radio_IRQHandler(void)
|
|||
|
||||
/* USER CODE BEGIN 1 */
|
||||
|
||||
void TIM1_IRQHandler(void)
|
||||
{
|
||||
HAL_TIM_IRQHandler(&htim1);
|
||||
}
|
||||
/**
|
||||
* @brief This function handles TIM1 Capture Compare Interrupt.
|
||||
*/
|
||||
void TIM1_CC_IRQHandler(void)
|
||||
{
|
||||
/* USER CODE BEGIN TIM1_CC_IRQn 0 */
|
||||
|
||||
/* USER CODE END TIM1_CC_IRQn 0 */
|
||||
HAL_TIM_IRQHandler(&htim1);
|
||||
TIM1_cnt++;
|
||||
/* USER CODE BEGIN TIM1_CC_IRQn 1 */
|
||||
|
||||
/* USER CODE END TIM1_CC_IRQn 1 */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief This function handles TIM1 Capture Compare Interrupt.
|
||||
*/
|
||||
void TIM1_IC_IRQHandler(void)
|
||||
{
|
||||
/* USER CODE BEGIN TIM1_CC_IRQn 0 */
|
||||
|
||||
/* USER CODE END TIM1_CC_IRQn 0 */
|
||||
HAL_TIM_IRQHandler(&htim1);
|
||||
TIM1_cnt++;
|
||||
/* USER CODE BEGIN TIM1_CC_IRQn 1 */
|
||||
|
||||
/* USER CODE END TIM1_CC_IRQn 1 */
|
||||
}
|
||||
|
||||
|
||||
/* USER CODE END 1 */
|
||||
|
|
|
|||
|
|
@ -383,5 +383,88 @@ void HAL_Delay(__IO uint32_t Delay)
|
|||
}
|
||||
|
||||
/* USER CODE BEGIN Overload_HAL_weaks */
|
||||
/**
|
||||
* @note This function overwrites the __weak one from HAL
|
||||
*/
|
||||
void HAL_Delay_Us(uint32_t uDelay)
|
||||
{
|
||||
#if 0
|
||||
uint32_t startval, tickn, delays, wait;
|
||||
startval = SysTick->VAL;
|
||||
tickn = HAL_GetTick();
|
||||
delays = uDelay * 48;
|
||||
if (delays > startval)
|
||||
{
|
||||
while (HAL_GetTick() == tickn) {}
|
||||
wait = 48000 + startval -delays;
|
||||
while (wait < SysTick->VAL) {};
|
||||
|
||||
}else {
|
||||
wait = startval - delays;
|
||||
while(wait < SysTick->VAL && HAL_GetTick() == tickn)
|
||||
{
|
||||
|
||||
}
|
||||
}
|
||||
#endif
|
||||
#if 0
|
||||
uint32_t g_fac_us=48;
|
||||
uint32_t ticks;
|
||||
uint32_t told, tnow, tcnt =0;
|
||||
uint32_t reload = SysTick->LOAD;
|
||||
|
||||
ticks = uDelay * g_fac_us;
|
||||
|
||||
told = SysTick->VAL;
|
||||
|
||||
while(1)
|
||||
{
|
||||
tnow = SysTick->VAL;
|
||||
if (tnow != told)
|
||||
{
|
||||
if (tnow < told)
|
||||
{
|
||||
tcnt += told -tnow;
|
||||
} else {
|
||||
tcnt += reload - tnow + told;
|
||||
}
|
||||
told = tnow;
|
||||
if (tcnt >= ticks)
|
||||
{
|
||||
break;
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
#endif
|
||||
|
||||
|
||||
#if 1
|
||||
__IO uint32_t delay= uDelay*48/8;
|
||||
do {__NOP();} while(delay --);
|
||||
#endif
|
||||
#if 0
|
||||
/* TIMER_IF can be based on other counter the SysTick e.g. RTC */
|
||||
/* USER CODE BEGIN HAL_Delay_1 */
|
||||
uint32_t startval, tickn, delays, wait;
|
||||
startval = SysTick->VAL;
|
||||
tickn = HAL_GetTick();
|
||||
// sysclock = 48000
|
||||
delays = uDelay*48;
|
||||
if (delays > startval)
|
||||
{
|
||||
while(HAL_GetTick() == tickn) ;
|
||||
wait = 48000 + startval - delays;
|
||||
while(wait < SysTick->VAL) ;
|
||||
} else {
|
||||
wait = startval - delays;
|
||||
while (wait < SysTick->VAL && HAL_GetTick() == tickn) ;
|
||||
}
|
||||
/* USER CODE END HAL_Delay_1 */
|
||||
#endif
|
||||
/* USER CODE BEGIN HAL_Delay_2 */
|
||||
|
||||
/* USER CODE END HAL_Delay_2 */
|
||||
}
|
||||
|
||||
/* USER CODE END Overload_HAL_weaks */
|
||||
|
|
|
|||
|
|
@ -502,6 +502,11 @@
|
|||
<type>1</type>
|
||||
<locationURI>copy_PARENT/Core/Src/sys_sensors.c</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Application/User/Core/tim.c</name>
|
||||
<type>1</type>
|
||||
<locationURI>PARENT-1-PROJECT_LOC/Core/Src/tim.c</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>Application/User/Core/timer_if.c</name>
|
||||
<type>1</type>
|
||||
|
|
|
|||
|
|
@ -25,6 +25,7 @@ D:/ONEDRIVE/STM32WLV13/Projects/NUCLEO-WL55JC/Applications/LoRaWAN/LoRaWAN_End_N
|
|||
D:/ONEDRIVE/STM32WLV13/Projects/NUCLEO-WL55JC/Applications/LoRaWAN/LoRaWAN_End_Node_55JC_AS923/Core/Src/sys_sensors.c \
|
||||
../Application/User/Core/syscalls.c \
|
||||
../Application/User/Core/sysmem.c \
|
||||
D:/ONEDRIVE/STM32WLV13/Projects/NUCLEO-WL55JC/Applications/LoRaWAN/LoRaWAN_End_Node_55JC_AS923/Core/Src/tim.c \
|
||||
D:/ONEDRIVE/STM32WLV13/Projects/NUCLEO-WL55JC/Applications/LoRaWAN/LoRaWAN_End_Node_55JC_AS923/Core/Src/timer_if.c \
|
||||
D:/ONEDRIVE/STM32WLV13/Projects/NUCLEO-WL55JC/Applications/LoRaWAN/LoRaWAN_End_Node_55JC_AS923/Core/Src/usart.c \
|
||||
D:/ONEDRIVE/STM32WLV13/Projects/NUCLEO-WL55JC/Applications/LoRaWAN/LoRaWAN_End_Node_55JC_AS923/Core/Src/usart_if.c
|
||||
|
|
@ -50,6 +51,7 @@ OBJS += \
|
|||
./Application/User/Core/sys_sensors.o \
|
||||
./Application/User/Core/syscalls.o \
|
||||
./Application/User/Core/sysmem.o \
|
||||
./Application/User/Core/tim.o \
|
||||
./Application/User/Core/timer_if.o \
|
||||
./Application/User/Core/usart.o \
|
||||
./Application/User/Core/usart_if.o
|
||||
|
|
@ -75,6 +77,7 @@ C_DEPS += \
|
|||
./Application/User/Core/sys_sensors.d \
|
||||
./Application/User/Core/syscalls.d \
|
||||
./Application/User/Core/sysmem.d \
|
||||
./Application/User/Core/tim.d \
|
||||
./Application/User/Core/timer_if.d \
|
||||
./Application/User/Core/usart.d \
|
||||
./Application/User/Core/usart_if.d
|
||||
|
|
@ -119,6 +122,8 @@ Application/User/Core/sys_sensors.o: D:/ONEDRIVE/STM32WLV13/Projects/NUCLEO-WL55
|
|||
arm-none-eabi-gcc "$<" -mcpu=cortex-m4 -std=gnu11 -DYUNHORN_STS_RANDOM -DRC -DCORE_CM4 -DUSE_HAL_DRIVER -DSTM32WL55xx -c -I../../Core/Inc -I../../LoRaWAN/App -I../../TOF/Target -I../../TOF/App -I../../LoRaWAN/Target -I../../../../../../../Drivers/STM32WLxx_HAL_Driver/Inc -I../../../../../../../Drivers/STM32WLxx_HAL_Driver/Inc/Legacy -I../../../../../../../Utilities/trace/adv_trace -I../../../../../../../Utilities/misc -I../../../../../../../Utilities/sequencer -I../../../../../../../Utilities/timer -I../../../../../../../Utilities/lpm/tiny_lpm -I../../../../../../../Middlewares/Third_Party/LoRaWAN/LmHandler/Packages -I../../../../../../../Drivers/CMSIS/Device/ST/STM32WLxx/Include -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Crypto -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Mac/Region -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Mac -I../../../../../../../Middlewares/Third_Party/LoRaWAN/LmHandler -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Utilities -I../../../../../../../Middlewares/Third_Party/SubGHz_Phy -I../../../../../../../Middlewares/Third_Party/SubGHz_Phy/stm32_radio_driver -I../../../../../../../Drivers/CMSIS/Include -I../../../../../../../Drivers/BSP/STM32WLxx_Nucleo -I../../../../../../../Drivers/BSP/Components/vl53l8cx/porting -I../../../../../../../Drivers/BSP/Components/Common -I../../../../../../../Drivers/BSP/53L8A1 -I../../../../../../../Drivers/BSP/Components/vl53l8cx/modules -I../../../../../../../Drivers/BSP/Components/vl53l8cx -Os -ffunction-sections -fdata-sections -Wall -fstack-usage -fcyclomatic-complexity -MMD -MP -MF"$(@:%.o=%.d)" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@"
|
||||
Application/User/Core/%.o Application/User/Core/%.su Application/User/Core/%.cyclo: ../Application/User/Core/%.c Application/User/Core/subdir.mk
|
||||
arm-none-eabi-gcc "$<" -mcpu=cortex-m4 -std=gnu11 -DYUNHORN_STS_RANDOM -DRC -DCORE_CM4 -DUSE_HAL_DRIVER -DSTM32WL55xx -c -I../../Core/Inc -I../../LoRaWAN/App -I../../TOF/Target -I../../TOF/App -I../../LoRaWAN/Target -I../../../../../../../Drivers/STM32WLxx_HAL_Driver/Inc -I../../../../../../../Drivers/STM32WLxx_HAL_Driver/Inc/Legacy -I../../../../../../../Utilities/trace/adv_trace -I../../../../../../../Utilities/misc -I../../../../../../../Utilities/sequencer -I../../../../../../../Utilities/timer -I../../../../../../../Utilities/lpm/tiny_lpm -I../../../../../../../Middlewares/Third_Party/LoRaWAN/LmHandler/Packages -I../../../../../../../Drivers/CMSIS/Device/ST/STM32WLxx/Include -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Crypto -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Mac/Region -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Mac -I../../../../../../../Middlewares/Third_Party/LoRaWAN/LmHandler -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Utilities -I../../../../../../../Middlewares/Third_Party/SubGHz_Phy -I../../../../../../../Middlewares/Third_Party/SubGHz_Phy/stm32_radio_driver -I../../../../../../../Drivers/CMSIS/Include -I../../../../../../../Drivers/BSP/STM32WLxx_Nucleo -I../../../../../../../Drivers/BSP/Components/vl53l8cx/porting -I../../../../../../../Drivers/BSP/Components/Common -I../../../../../../../Drivers/BSP/53L8A1 -I../../../../../../../Drivers/BSP/Components/vl53l8cx/modules -I../../../../../../../Drivers/BSP/Components/vl53l8cx -Os -ffunction-sections -fdata-sections -Wall -fstack-usage -fcyclomatic-complexity -MMD -MP -MF"$(@:%.o=%.d)" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@"
|
||||
Application/User/Core/tim.o: D:/ONEDRIVE/STM32WLV13/Projects/NUCLEO-WL55JC/Applications/LoRaWAN/LoRaWAN_End_Node_55JC_AS923/Core/Src/tim.c Application/User/Core/subdir.mk
|
||||
arm-none-eabi-gcc "$<" -mcpu=cortex-m4 -std=gnu11 -DYUNHORN_STS_RANDOM -DRC -DCORE_CM4 -DUSE_HAL_DRIVER -DSTM32WL55xx -c -I../../Core/Inc -I../../LoRaWAN/App -I../../TOF/Target -I../../TOF/App -I../../LoRaWAN/Target -I../../../../../../../Drivers/STM32WLxx_HAL_Driver/Inc -I../../../../../../../Drivers/STM32WLxx_HAL_Driver/Inc/Legacy -I../../../../../../../Utilities/trace/adv_trace -I../../../../../../../Utilities/misc -I../../../../../../../Utilities/sequencer -I../../../../../../../Utilities/timer -I../../../../../../../Utilities/lpm/tiny_lpm -I../../../../../../../Middlewares/Third_Party/LoRaWAN/LmHandler/Packages -I../../../../../../../Drivers/CMSIS/Device/ST/STM32WLxx/Include -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Crypto -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Mac/Region -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Mac -I../../../../../../../Middlewares/Third_Party/LoRaWAN/LmHandler -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Utilities -I../../../../../../../Middlewares/Third_Party/SubGHz_Phy -I../../../../../../../Middlewares/Third_Party/SubGHz_Phy/stm32_radio_driver -I../../../../../../../Drivers/CMSIS/Include -I../../../../../../../Drivers/BSP/STM32WLxx_Nucleo -I../../../../../../../Drivers/BSP/Components/vl53l8cx/porting -I../../../../../../../Drivers/BSP/Components/Common -I../../../../../../../Drivers/BSP/53L8A1 -I../../../../../../../Drivers/BSP/Components/vl53l8cx/modules -I../../../../../../../Drivers/BSP/Components/vl53l8cx -Os -ffunction-sections -fdata-sections -Wall -fstack-usage -fcyclomatic-complexity -MMD -MP -MF"$(@:%.o=%.d)" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@"
|
||||
Application/User/Core/timer_if.o: D:/ONEDRIVE/STM32WLV13/Projects/NUCLEO-WL55JC/Applications/LoRaWAN/LoRaWAN_End_Node_55JC_AS923/Core/Src/timer_if.c Application/User/Core/subdir.mk
|
||||
arm-none-eabi-gcc "$<" -mcpu=cortex-m4 -std=gnu11 -DYUNHORN_STS_RANDOM -DRC -DCORE_CM4 -DUSE_HAL_DRIVER -DSTM32WL55xx -c -I../../Core/Inc -I../../LoRaWAN/App -I../../TOF/Target -I../../TOF/App -I../../LoRaWAN/Target -I../../../../../../../Drivers/STM32WLxx_HAL_Driver/Inc -I../../../../../../../Drivers/STM32WLxx_HAL_Driver/Inc/Legacy -I../../../../../../../Utilities/trace/adv_trace -I../../../../../../../Utilities/misc -I../../../../../../../Utilities/sequencer -I../../../../../../../Utilities/timer -I../../../../../../../Utilities/lpm/tiny_lpm -I../../../../../../../Middlewares/Third_Party/LoRaWAN/LmHandler/Packages -I../../../../../../../Drivers/CMSIS/Device/ST/STM32WLxx/Include -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Crypto -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Mac/Region -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Mac -I../../../../../../../Middlewares/Third_Party/LoRaWAN/LmHandler -I../../../../../../../Middlewares/Third_Party/LoRaWAN/Utilities -I../../../../../../../Middlewares/Third_Party/SubGHz_Phy -I../../../../../../../Middlewares/Third_Party/SubGHz_Phy/stm32_radio_driver -I../../../../../../../Drivers/CMSIS/Include -I../../../../../../../Drivers/BSP/STM32WLxx_Nucleo -I../../../../../../../Drivers/BSP/Components/vl53l8cx/porting -I../../../../../../../Drivers/BSP/Components/Common -I../../../../../../../Drivers/BSP/53L8A1 -I../../../../../../../Drivers/BSP/Components/vl53l8cx/modules -I../../../../../../../Drivers/BSP/Components/vl53l8cx -Os -ffunction-sections -fdata-sections -Wall -fstack-usage -fcyclomatic-complexity -MMD -MP -MF"$(@:%.o=%.d)" -MT"$@" --specs=nano.specs -mfloat-abi=soft -mthumb -o "$@"
|
||||
Application/User/Core/usart.o: D:/ONEDRIVE/STM32WLV13/Projects/NUCLEO-WL55JC/Applications/LoRaWAN/LoRaWAN_End_Node_55JC_AS923/Core/Src/usart.c Application/User/Core/subdir.mk
|
||||
|
|
@ -129,7 +134,7 @@ Application/User/Core/usart_if.o: D:/ONEDRIVE/STM32WLV13/Projects/NUCLEO-WL55JC/
|
|||
clean: clean-Application-2f-User-2f-Core
|
||||
|
||||
clean-Application-2f-User-2f-Core:
|
||||
-$(RM) ./Application/User/Core/adc.cyclo ./Application/User/Core/adc.d ./Application/User/Core/adc.o ./Application/User/Core/adc.su ./Application/User/Core/adc_if.cyclo ./Application/User/Core/adc_if.d ./Application/User/Core/adc_if.o ./Application/User/Core/adc_if.su ./Application/User/Core/dma.cyclo ./Application/User/Core/dma.d ./Application/User/Core/dma.o ./Application/User/Core/dma.su ./Application/User/Core/ev1527.cyclo ./Application/User/Core/ev1527.d ./Application/User/Core/ev1527.o ./Application/User/Core/ev1527.su ./Application/User/Core/flash_if.cyclo ./Application/User/Core/flash_if.d ./Application/User/Core/flash_if.o ./Application/User/Core/flash_if.su ./Application/User/Core/gpio.cyclo ./Application/User/Core/gpio.d ./Application/User/Core/gpio.o ./Application/User/Core/gpio.su ./Application/User/Core/main.cyclo ./Application/User/Core/main.d ./Application/User/Core/main.o ./Application/User/Core/main.su ./Application/User/Core/rtc.cyclo ./Application/User/Core/rtc.d ./Application/User/Core/rtc.o ./Application/User/Core/rtc.su ./Application/User/Core/sensirion_common.cyclo ./Application/User/Core/sensirion_common.d ./Application/User/Core/sensirion_common.o ./Application/User/Core/sensirion_common.su ./Application/User/Core/sht3x.cyclo ./Application/User/Core/sht3x.d ./Application/User/Core/sht3x.o ./Application/User/Core/sht3x.su ./Application/User/Core/stm32_lpm_if.cyclo ./Application/User/Core/stm32_lpm_if.d ./Application/User/Core/stm32_lpm_if.o ./Application/User/Core/stm32_lpm_if.su ./Application/User/Core/stm32wlxx_hal_msp.cyclo ./Application/User/Core/stm32wlxx_hal_msp.d ./Application/User/Core/stm32wlxx_hal_msp.o ./Application/User/Core/stm32wlxx_hal_msp.su ./Application/User/Core/stm32wlxx_it.cyclo ./Application/User/Core/stm32wlxx_it.d ./Application/User/Core/stm32wlxx_it.o ./Application/User/Core/stm32wlxx_it.su ./Application/User/Core/sts_aq_o3.cyclo ./Application/User/Core/sts_aq_o3.d ./Application/User/Core/sts_aq_o3.o ./Application/User/Core/sts_aq_o3.su ./Application/User/Core/subghz.cyclo ./Application/User/Core/subghz.d ./Application/User/Core/subghz.o ./Application/User/Core/subghz.su ./Application/User/Core/sys_app.cyclo ./Application/User/Core/sys_app.d ./Application/User/Core/sys_app.o ./Application/User/Core/sys_app.su ./Application/User/Core/sys_debug.cyclo ./Application/User/Core/sys_debug.d ./Application/User/Core/sys_debug.o ./Application/User/Core/sys_debug.su ./Application/User/Core/sys_sensors.cyclo ./Application/User/Core/sys_sensors.d ./Application/User/Core/sys_sensors.o ./Application/User/Core/sys_sensors.su ./Application/User/Core/syscalls.cyclo ./Application/User/Core/syscalls.d ./Application/User/Core/syscalls.o ./Application/User/Core/syscalls.su ./Application/User/Core/sysmem.cyclo ./Application/User/Core/sysmem.d ./Application/User/Core/sysmem.o ./Application/User/Core/sysmem.su ./Application/User/Core/timer_if.cyclo ./Application/User/Core/timer_if.d ./Application/User/Core/timer_if.o ./Application/User/Core/timer_if.su ./Application/User/Core/usart.cyclo ./Application/User/Core/usart.d ./Application/User/Core/usart.o ./Application/User/Core/usart.su ./Application/User/Core/usart_if.cyclo ./Application/User/Core/usart_if.d ./Application/User/Core/usart_if.o ./Application/User/Core/usart_if.su
|
||||
-$(RM) ./Application/User/Core/adc.cyclo ./Application/User/Core/adc.d ./Application/User/Core/adc.o ./Application/User/Core/adc.su ./Application/User/Core/adc_if.cyclo ./Application/User/Core/adc_if.d ./Application/User/Core/adc_if.o ./Application/User/Core/adc_if.su ./Application/User/Core/dma.cyclo ./Application/User/Core/dma.d ./Application/User/Core/dma.o ./Application/User/Core/dma.su ./Application/User/Core/ev1527.cyclo ./Application/User/Core/ev1527.d ./Application/User/Core/ev1527.o ./Application/User/Core/ev1527.su ./Application/User/Core/flash_if.cyclo ./Application/User/Core/flash_if.d ./Application/User/Core/flash_if.o ./Application/User/Core/flash_if.su ./Application/User/Core/gpio.cyclo ./Application/User/Core/gpio.d ./Application/User/Core/gpio.o ./Application/User/Core/gpio.su ./Application/User/Core/main.cyclo ./Application/User/Core/main.d ./Application/User/Core/main.o ./Application/User/Core/main.su ./Application/User/Core/rtc.cyclo ./Application/User/Core/rtc.d ./Application/User/Core/rtc.o ./Application/User/Core/rtc.su ./Application/User/Core/sensirion_common.cyclo ./Application/User/Core/sensirion_common.d ./Application/User/Core/sensirion_common.o ./Application/User/Core/sensirion_common.su ./Application/User/Core/sht3x.cyclo ./Application/User/Core/sht3x.d ./Application/User/Core/sht3x.o ./Application/User/Core/sht3x.su ./Application/User/Core/stm32_lpm_if.cyclo ./Application/User/Core/stm32_lpm_if.d ./Application/User/Core/stm32_lpm_if.o ./Application/User/Core/stm32_lpm_if.su ./Application/User/Core/stm32wlxx_hal_msp.cyclo ./Application/User/Core/stm32wlxx_hal_msp.d ./Application/User/Core/stm32wlxx_hal_msp.o ./Application/User/Core/stm32wlxx_hal_msp.su ./Application/User/Core/stm32wlxx_it.cyclo ./Application/User/Core/stm32wlxx_it.d ./Application/User/Core/stm32wlxx_it.o ./Application/User/Core/stm32wlxx_it.su ./Application/User/Core/sts_aq_o3.cyclo ./Application/User/Core/sts_aq_o3.d ./Application/User/Core/sts_aq_o3.o ./Application/User/Core/sts_aq_o3.su ./Application/User/Core/subghz.cyclo ./Application/User/Core/subghz.d ./Application/User/Core/subghz.o ./Application/User/Core/subghz.su ./Application/User/Core/sys_app.cyclo ./Application/User/Core/sys_app.d ./Application/User/Core/sys_app.o ./Application/User/Core/sys_app.su ./Application/User/Core/sys_debug.cyclo ./Application/User/Core/sys_debug.d ./Application/User/Core/sys_debug.o ./Application/User/Core/sys_debug.su ./Application/User/Core/sys_sensors.cyclo ./Application/User/Core/sys_sensors.d ./Application/User/Core/sys_sensors.o ./Application/User/Core/sys_sensors.su ./Application/User/Core/syscalls.cyclo ./Application/User/Core/syscalls.d ./Application/User/Core/syscalls.o ./Application/User/Core/syscalls.su ./Application/User/Core/sysmem.cyclo ./Application/User/Core/sysmem.d ./Application/User/Core/sysmem.o ./Application/User/Core/sysmem.su ./Application/User/Core/tim.cyclo ./Application/User/Core/tim.d ./Application/User/Core/tim.o ./Application/User/Core/tim.su ./Application/User/Core/timer_if.cyclo ./Application/User/Core/timer_if.d ./Application/User/Core/timer_if.o ./Application/User/Core/timer_if.su ./Application/User/Core/usart.cyclo ./Application/User/Core/usart.d ./Application/User/Core/usart.o ./Application/User/Core/usart.su ./Application/User/Core/usart_if.cyclo ./Application/User/Core/usart_if.d ./Application/User/Core/usart_if.o ./Application/User/Core/usart_if.su
|
||||
|
||||
.PHONY: clean-Application-2f-User-2f-Core
|
||||
|
||||
|
|
|
|||
Binary file not shown.
|
|
@ -18,6 +18,7 @@
|
|||
"./Application/User/Core/sys_sensors.o"
|
||||
"./Application/User/Core/syscalls.o"
|
||||
"./Application/User/Core/sysmem.o"
|
||||
"./Application/User/Core/tim.o"
|
||||
"./Application/User/Core/timer_if.o"
|
||||
"./Application/User/Core/usart.o"
|
||||
"./Application/User/Core/usart_if.o"
|
||||
|
|
|
|||
Loading…
Reference in New Issue