bad test...port 0 , current 90uA

Core/Src/gpio.c

@@ -49,23 +49,34 @@ void MX_GPIO_Init(void)
   __HAL_RCC_GPIOC_CLK_ENABLE();
   __HAL_RCC_GPIOA_CLK_ENABLE();
 
+  GPIO_InitStruct.Pin = GPIO_PIN_All;
+  GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
+  GPIO_InitStruct.Pull = GPIO_NOPULL;
+  HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
+  HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
+  HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
+  __HAL_RCC_GPIOB_CLK_DISABLE();
+  __HAL_RCC_GPIOC_CLK_DISABLE();
+  //__HAL_RCC_GPIOA_CLK_DISABLE();
   /*Configure GPIO pin Output Level */
+#if 0
   HAL_GPIO_WritePin(GPIOB, LED1_Pin|LED2_Pin|PROB2_Pin|PROB1_Pin
                           |LED3_Pin, GPIO_PIN_RESET);
-
+#endif
+#if 0
   /*Configure GPIO pins : PBPin PBPin PBPin */
   GPIO_InitStruct.Pin = LED1_Pin|LED2_Pin|LED3_Pin;
   GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
   GPIO_InitStruct.Pull = GPIO_NOPULL;
   GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
   HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
-
+#endif
   /*Configure GPIO pins : PAPin PAPin */
-  GPIO_InitStruct.Pin = BUT1_Pin|BUT2_Pin;
-  GPIO_InitStruct.Mode = GPIO_MODE_IT_FALLING;
+  GPIO_InitStruct.Pin = BUT1_Pin;
+  GPIO_InitStruct.Mode = GPIO_MODE_IT_RISING_FALLING;
   GPIO_InitStruct.Pull = GPIO_PULLUP;
   HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
-
+#if 0
   /*Configure GPIO pins : PBPin PBPin */
   GPIO_InitStruct.Pin = PROB2_Pin|PROB1_Pin;
   GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
@@ -78,17 +89,17 @@ void MX_GPIO_Init(void)
   GPIO_InitStruct.Mode = GPIO_MODE_IT_FALLING;
   GPIO_InitStruct.Pull = GPIO_PULLUP;
   HAL_GPIO_Init(BUT3_GPIO_Port, &GPIO_InitStruct);
-
+#endif
   /* EXTI interrupt init*/
   HAL_NVIC_SetPriority(EXTI0_IRQn, 0, 0);
   HAL_NVIC_EnableIRQ(EXTI0_IRQn);
-
+#if 0
   HAL_NVIC_SetPriority(EXTI1_IRQn, 0, 0);
   HAL_NVIC_EnableIRQ(EXTI1_IRQn);
 
   HAL_NVIC_SetPriority(EXTI9_5_IRQn, 0, 0);
   HAL_NVIC_EnableIRQ(EXTI9_5_IRQn);
-
+#endif
 }
 
 /* USER CODE BEGIN 2 */

Core/Src/stm32_lpm_if.c

@@ -85,14 +85,20 @@ void PWR_EnterOffMode(void)
 void PWR_ExitOffMode(void)
 {
   /* USER CODE BEGIN ExitOffMode_1 */
-
+	HAL_ResumeTick();
   /* USER CODE END ExitOffMode_1 */
 }
 
 void PWR_EnterStopMode(void)
 {
   /* USER CODE BEGIN EnterStopMode_1 */
+#if 0
+	HAL_GPIO_WritePin(GPIOB, GPIO_PIN_All, GPIO_PIN_RESET);
+	HAL_GPIO_WritePin(GPIOC, GPIO_PIN_All, GPIO_PIN_RESET);
+	HAL_GPIO_WritePin(GPIOA, GPIO_PIN_All|~GPIO_PIN_0, GPIO_PIN_RESET);
 
+	HAL_GPIO_WritePin(GPIOA, GPIO_PIN_All, GPIO_PIN_RESET);
+#endif
   /* USER CODE END EnterStopMode_1 */
   HAL_SuspendTick();
   /* Clear Status Flag before entering STOP/STANDBY Mode */
@@ -120,7 +126,7 @@ void PWR_ExitStopMode(void)
     SRAM ctrls, DMAx, DMAMux, AES, RNG, HSEM  */
 
   /* Resume not retained USARTx and DMA */
-  vcom_Resume();
+  //vcom_Resume();
   /* USER CODE BEGIN ExitStopMode_2 */
 
   /* USER CODE END ExitStopMode_2 */

LoRaWAN/App/lora_app.c

@@ -342,7 +342,7 @@ static UTIL_TIMER_Object_t JoinLedTimer;
 
 /* Exported functions ---------------------------------------------------------*/
 /* USER CODE BEGIN EF */
-
+volatile uint8_t door_status=0, door_previous_status=0, door_change_flag=0;
 /* USER CODE END EF */
 
 void LoRaWAN_Init(void)
@@ -446,9 +446,16 @@ void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin)
   {
     case  BUT1_Pin:
       /* Note: when "EventType == TX_ON_TIMER" this GPIO is not initialized */
-      if (EventType == TX_ON_EVENT)
+      //if (EventType == TX_ON_EVENT)
       {
-        UTIL_SEQ_SetTask((1 << CFG_SEQ_Task_LoRaSendOnTxTimerOrButtonEvent), CFG_SEQ_Prio_0);
+    	  door_status = HAL_GPIO_ReadPin(GPIOA,GPIO_PIN_0);
+    	  if (door_status != door_previous_status) {
+    		  door_change_flag =1;
+    		  door_previous_status = door_status;
+
+
+    		  UTIL_SEQ_SetTask((1 << CFG_SEQ_Task_LoRaSendOnTxTimerOrButtonEvent), CFG_SEQ_Prio_0);
+    	  }
       }
       break;
     case  BUT2_Pin:
@@ -577,6 +584,7 @@ static void SendTxData(void)
     APP_LOG(TS_ON, VLEVEL_M, "temp: %d\r\n", (int16_t)(sensor_data.temperature));
 
     AppData.Port = LORAWAN_USER_APP_PORT;
+    AppData.Port = 2;
 
 #ifdef CAYENNE_LPP
     CayenneLppReset();
@@ -612,6 +620,8 @@ static void SendTxData(void)
       AppData.Buffer[i++] = 0;
       AppData.Buffer[i++] = 0;
       AppData.Buffer[i++] = 0;
+      AppData.Buffer[i++] = batteryLevel;
+      AppData.Buffer[i++] = door_status;
     }
     else
     {