/**
  *
  * Copyright (c) 2023 STMicroelectronics.
  * All rights reserved.
  *
  * This software is licensed under terms that can be found in the LICENSE file
  * in the root directory of this software component.
  * If no LICENSE file comes with this software, it is provided AS-IS.
  *
  ******************************************************************************
  */


/***********************************/
/*   VL53LMZ ULD basic example    */
/***********************************/
/*
* This example is the most basic. It initializes the VL53LMZ ULD, and starts
* a ranging to capture 10 frames.
*
* In this example, we also suppose that there is an external
* synchronization signal at 30Hz connected to the VL53LMZ SYNC pin.
*/

#include <stdlib.h>
#include <string.h>
#include <stdio.h>
#include "vl53lmz_api.h"

int example1(void)
{

	/*********************************/
	/*   VL53LMZ ranging variables  */
	/*********************************/

	uint8_t 				status, loop, isAlive, isReady, i;
	VL53LMZ_Configuration 	Dev;			/* Sensor configuration */
	VL53LMZ_ResultsData 	Results;		/* Results data from VL53LMZ */


	/*********************************/
	/*      Customer platform        */
	/*********************************/

	/* Fill the platform structure with customer's implementation. For this
	* example, only the I2C address is used.
	*/
	Dev.platform.address = VL53LMZ_DEFAULT_I2C_ADDRESS;

	/* (Optional) Reset sensor toggling PINs (see platform, not in API) */
	//Reset_Sensor(&(Dev.platform));
	//Reset_Sensor();
	/* (Optional) Set a new I2C address if the wanted address is different
	* from the default one (filled with 0x20 for this example).
	*/
	//status = vl53lmz_set_i2c_address(&Dev, 0x20);


	/*********************************/
	/*   Power on sensor and init    */
	/*********************************/

	/* (Optional) Check if there is a VL53LMZ sensor connected */
	status = vl53lmz_is_alive(&Dev, &isAlive);
	if(!isAlive || status)
	{
		printf("VL53LMZ not detected at requested address\n");
		return status;
	}

	/* (Mandatory) Init VL53LMZ sensor */
	status = vl53lmz_init(&Dev);
	if(status)
	{
		printf("VL53LMZ ULD Loading failed\n");
		return status;
	}

	printf("VL53LMZ ULD ready ! (Version : %s)\n",
			VL53LMZ_API_REVISION);


	/*********************************/
	/*         Ranging loop          */
	/*********************************/

	status = vl53lmz_start_ranging(&Dev);

	loop = 0;
	while(loop < 10)
	{
		/* Use polling function to know when a new measurement is ready.
		 * Another way can be to wait for HW interrupt raised on PIN A1
		 * (INT) when a new measurement is ready */
 
		status = vl53lmz_check_data_ready(&Dev, &isReady);

		if(isReady)
		{
			vl53lmz_get_ranging_data(&Dev, &Results);

			/* As the sensor is set in 4x4 mode by default, we have a total 
			 * of 16 zones to print. For this example, only the data of first zone are 
			 * print */
			printf("Print data no : %3u\n", Dev.streamcount);
			for(i = 0; i < 16; i++)
			{
				printf("Zone : %3d, Status : %3u, Distance : %4d mm\n",
					i,
					Results.target_status[VL53LMZ_NB_TARGET_PER_ZONE*i],
					Results.distance_mm[VL53LMZ_NB_TARGET_PER_ZONE*i]);
			}
			printf("\n");
			loop++;
		}

		/* Wait a few ms to avoid too high polling (function in platform
		 * file, not in API) */
		WaitMs(&(Dev.platform), 5);
	}

	status = vl53lmz_stop_ranging(&Dev);
	printf("End of ULD demo\n");
	return status;
}