disable debug

Core/Inc/sys_conf.h

@@ -47,12 +47,12 @@ extern "C" {
 /**
   * @brief  Verbose level for all trace logs
   */
-#define VERBOSE_LEVEL                        VLEVEL_M
+#define VERBOSE_LEVEL                        VLEVEL_OFF
 
 /**
   * @brief Enable trace logs
   */
-#define APP_LOG_ENABLED                      1
+#define APP_LOG_ENABLED                      0
 
 /**
   * @brief Activate monitoring (probes) of some internal RF signals for debug purpose
@@ -75,7 +75,7 @@ extern "C" {
   * @brief Enable/Disable MCU Debugger pins (dbg serial wires)
   * @note  by HW serial wires are ON by default, need to put them OFF to save power
   */
-#define DEBUGGER_ENABLED                     1
+#define DEBUGGER_ENABLED                     0
 
 /**
   * @brief Disable Low Power mode

LoRaWAN/App/lora_app.c

@@ -364,7 +364,7 @@ static void OnYunhornSTSDurationCheckTimerEvent(void *context);
   * @param  context ptr of STS RSS WakeUp context
   */
 
-static void OnYunhornSTSOORSSWakeUpTimerEvent(void *context);
+//static void OnYunhornSTSOORSSWakeUpTimerEvent(void *context);
 
 /**
   * @brief  Yunhorn STS Heart beat timer callback function
@@ -1751,13 +1751,14 @@ static void OnYunhornSTSLampBarColorTimerEvent(void *context)
   * @brief  SYS occupancy, door lock, motion duration check timer callback function
   * @param  context ptr of duration check context
   */
+#if 0
 static void OnYunhornSTSDurationCheckTimerEvent(void *context)
 {
 #ifdef STS_O6
 
 #endif
 }
-
+#endif
 /**
   * @brief  Yunhorn STS Occupancy RSS WakeUP timer callback function
   * @param  context ptr of STS RSS WakeUp context

STS/Core/Inc/yunhorn_sts_sensors.h

@@ -257,6 +257,8 @@ void OnRestoreSTSCFGContextProcess(void);
 void STS_SENSOR_Power_ON(uint8_t cnt);
 void STS_SENSOR_Power_OFF(uint8_t cnt);
 void STS_SENSOR_MEMS_Reset(uint8_t cnt);
+void STS_Sensor_Init(void);
+void STS_Sensor_Prepare(void);
 
 void STS_PRESENCE_SENSOR_NVM_CFG(void);
 void STS_PRESENCE_SENSOR_NVM_CFG_SIMPLE(void);

STS/TOF/App/app_tof.c

@@ -84,7 +84,7 @@ static void MX_53L8A1_ThresholdDetection_Process(void);
 static void print_result(RANGING_SENSOR_Result_t *Result);
 
 #endif
-static int32_t status = 0;
+//static int32_t status = 0;
 
 volatile uint8_t ToF_EventDetected = 0;
 uint16_t sensor_id=0;

STS/TOF/App/app_tof_peoplecount.c

@@ -67,7 +67,7 @@ int status = 0;
 volatile int IntCount;
 #define isInterrupt 1 /* If isInterrupt = 1 then device working in interrupt mode, else device working in polling mode */
 /* USER CODE END PV */
-static int PplCounter;
+//static int PplCounter;
 static int center[2] = {FRONT_ZONE_CENTER,BACK_ZONE_CENTER};
 
 static int Zone = 0;
@@ -661,16 +661,17 @@ void STS_TOF_VL53LX_PeopleCounting_Process_Start(void)
 #if	(defined(STS_T6))
 void STS_TOF_VL53LX_PresenceDetection_Process_Start(void)
 {
+	int status=0;
 
 	//APP_LOG(TS_OFF, VLEVEL_M,"###############   TOF  VL53LX_ PRESENCE DETECTION SUB-PROCESS \r\n");
 	{
 		//volatile int sts_tof_init_status=0;
 		if (sts_tof_init_status !=0)
 		{
-			int ret=sts_tof_vl53lx_presence_detection_init();
+			status=sts_tof_vl53lx_presence_detection_init();
 		} else
 		{
-			int status = sts_tof_vl53lx_presence_detection_start();
+			status = sts_tof_vl53lx_presence_detection_start();
 			if (status == -1)
 			{
 				sts_tof_vl53lx_presence_detection_init();

STS/TOF/vl53l1x_uld/X-NUCLEO-53L1A1.c

@@ -96,7 +96,7 @@ CurIOVal;
 
 /* Forward definition of private function */
 
-static int _ExpanderRd(int I2cExpAddr, int index, uint8_t *data, int n_data);
+//static int _ExpanderRd(int I2cExpAddr, int index, uint8_t *data, int n_data);
 static int _ExpanderWR(int I2cExpAddr, int index, uint8_t *data, int n_data);
 //static int _ExpandersSetAllIO(void);
 
@@ -342,7 +342,7 @@ done_err:
  * @param n_data     number of byte to read
  * @return           of if ok else i2c I/O operation status
  */
-
+#if 0
 static int _ExpanderRd(int I2cExpAddr, int index, uint8_t *data, int n_data) {
 
     int status;
@@ -358,7 +358,7 @@ static int _ExpanderRd(int I2cExpAddr, int index, uint8_t *data, int n_data) {
     XNUCLEO53L1A1_PutI2cBus();
     return status;
 }
-
+#endif
 /**
  * STMPE1600 i2c Expender register write
  * @param I2cExpAddr Expender address