diff --git a/Core/Inc/sys_conf.h b/Core/Inc/sys_conf.h
index 241072d..f10502a 100644
--- a/Core/Inc/sys_conf.h
+++ b/Core/Inc/sys_conf.h
@@ -47,12 +47,12 @@ extern "C" {
 /**
   * @brief  Verbose level for all trace logs
   */
-#define VERBOSE_LEVEL                        VLEVEL_OFF
+#define VERBOSE_LEVEL                        VLEVEL_M
 
 /**
   * @brief Enable trace logs
   */
-#define APP_LOG_ENABLED                      0
+#define APP_LOG_ENABLED                      1
 
 /**
   * @brief Activate monitoring (probes) of some internal RF signals for debug purpose
@@ -75,7 +75,7 @@ extern "C" {
   * @brief Enable/Disable MCU Debugger pins (dbg serial wires)
   * @note  by HW serial wires are ON by default, need to put them OFF to save power
   */
-#define DEBUGGER_ENABLED                     0
+#define DEBUGGER_ENABLED                     1
 
 /**
   * @brief Disable Low Power mode
diff --git a/STM32CubeIDE/Release/WLE5CC_NODE_STS.elf b/STM32CubeIDE/Release/WLE5CC_NODE_STS.elf
index 559123f..2ebee8c 100644
Binary files a/STM32CubeIDE/Release/WLE5CC_NODE_STS.elf and b/STM32CubeIDE/Release/WLE5CC_NODE_STS.elf differ
diff --git a/STS/TOF/App/app_tof_peoplecount.c b/STS/TOF/App/app_tof_peoplecount.c
index c0e743c..c8e6ea8 100644
--- a/STS/TOF/App/app_tof_peoplecount.c
+++ b/STS/TOF/App/app_tof_peoplecount.c
@@ -34,12 +34,12 @@ extern volatile uint8_t sts_lamp_bar_color, sts_color_occupy_vacant;
 
 volatile sts_ppc_cfg_type_t ppc_cfg[10] = {
 		{DOOR_SIDE_1300,10, 1300,0, 1200,8,33, DISTANCE_MODE_SHORT,175,231},
-		{DOOR_JAM_1600, 10, 1600,0, 1300,8,33, DISTANCE_MODE_SHORT,175,231},
-		{DOOR_JAM_2400, 10, 2400,400, 1900,8,50, DISTANCE_MODE_LONG,175,231},
+		{DOOR_JAM_1600, 10, 1600,0, 1300,8,50, DISTANCE_MODE_SHORT,175,231},
+		{DOOR_JAM_2400, 10, 2400,400, 1900,8,100, DISTANCE_MODE_LONG,175,231},
 		{DOOR_JAM_3000, 10, 3000,1200, 2500,8,100,DISTANCE_MODE_LONG,175,231},
 		{DOOR_JAM_3500, 10, 3500,1700, 3000,8,100,DISTANCE_MODE_LONG,175,231},
 		{DOOR_JAM_4000, 10, 4000,2200, 3500,8,200,DISTANCE_MODE_LONG,175,231},
-		{DOOR_JAM_NOW,  10, 2200, 400, 1800,8,50,DISTANCE_MODE_LONG,175,231},
+		{DOOR_JAM_NOW,  10, 2200, 400, 1800,8,100,DISTANCE_MODE_LONG,175,231},
 };
 volatile sts_zone_center_by_rows_of_spads_t zone_center[4]={
 		{4, 151, 247},
@@ -727,11 +727,11 @@ int sts_tof_vl53lx_presence_detection_init(void)
 
   // Those basic I2C read functions can be used to check your own I2C functions */
   status = VL53L1_RdByte(dev, 0x010F, &byteData);
-  APP_LOG(TS_OFF, VLEVEL_L,"VL53L1X Model_ID: %X\n", byteData);
+  APP_LOG(TS_OFF, VLEVEL_H,"VL53L1X Model_ID: %X\n", byteData);
   status = VL53L1_RdByte(dev, 0x0110, &byteData);
-  APP_LOG(TS_OFF, VLEVEL_L,"VL53L1X Module_Type: %X\n", byteData);
+  APP_LOG(TS_OFF, VLEVEL_H,"VL53L1X Module_Type: %X\n", byteData);
   status = VL53L1_RdWord(dev, 0x010F, &wordData);
-  APP_LOG(TS_OFF, VLEVEL_L,"VL53L1X: %X\n", wordData);
+  APP_LOG(TS_OFF, VLEVEL_H,"VL53L1X: %X\n", wordData);
   sensor_id = wordData;
   wordData = 0;
   while (sensorState == 0) {
@@ -739,11 +739,11 @@ int sts_tof_vl53lx_presence_detection_init(void)
     HAL_Delay(2);
     wordData ++;
     if (wordData > 8000) {
-    	APP_LOG(TS_OFF, VLEVEL_L,"\n\n ***Failed to boot Chip***\n\n\n");
+    	APP_LOG(TS_OFF, VLEVEL_H,"\n\n ***Failed to boot Chip***\n\n\n");
     	//return status;
     }
   }
-  APP_LOG(TS_OFF, VLEVEL_M,"\nChip booted\n\n");
+  APP_LOG(TS_OFF, VLEVEL_H,"\nChip booted\n\n");
 
   /* Initialize and configure the device according to people counting need */
   status = VL53L1X_SensorInit(dev);