/* USER CODE BEGIN Header */
/**
  ******************************************************************************
  * @file           : main.h
  * @brief          : Header for main.c file.
  *                   This file contains the common defines of the application.
  ******************************************************************************
  * @attention
  *
  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
  * All rights reserved.</center></h2>
  *
  * This software component is licensed by ST under BSD 3-Clause license,
  * the "License"; You may not use this file except in compliance with the
  * License. You may obtain a copy of the License at:
  *                        opensource.org/licenses/BSD-3-Clause
  *
  ******************************************************************************
  */
/* USER CODE END Header */

/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __MAIN_H
#define __MAIN_H

#ifdef __cplusplus
extern "C" {
#endif

/* Includes ------------------------------------------------------------------*/
#include "stm32f1xx_ll_dma.h"
#include "stm32f1xx_ll_iwdg.h"
#include "stm32f1xx_ll_rcc.h"
#include "stm32f1xx_ll_bus.h"
#include "stm32f1xx_ll_system.h"
#include "stm32f1xx_ll_exti.h"
#include "stm32f1xx_ll_cortex.h"
#include "stm32f1xx_ll_utils.h"
#include "stm32f1xx_ll_pwr.h"
#include "stm32f1xx_ll_tim.h"
#include "stm32f1xx_ll_usart.h"
#include "stm32f1xx.h"
#include "stm32f1xx_ll_gpio.h"

#if defined(USE_FULL_ASSERT)
#include "stm32_assert.h"
#endif /* USE_FULL_ASSERT */

/* Private includes ----------------------------------------------------------*/
/* USER CODE BEGIN Includes */

/* USER CODE END Includes */

/* Exported types ------------------------------------------------------------*/
/* USER CODE BEGIN ET */

/* USER CODE END ET */

/* Exported constants --------------------------------------------------------*/
/* USER CODE BEGIN EC */

/* USER CODE END EC */

/* Exported macro ------------------------------------------------------------*/
/* USER CODE BEGIN EM */

/* USER CODE END EM */

/* Exported functions prototypes ---------------------------------------------*/
void Error_Handler(void);

/* USER CODE BEGIN EFP */
void Offline_Working(void);
void Reed_Working(void);
uint32_t MCU_UID(void);
/* USER CODE END EFP */

/* Private defines -----------------------------------------------------------*/
#define Reed_Switch_Pin LL_GPIO_PIN_4
#define Reed_Switch_GPIO_Port GPIOA
#define Reed_Switch_EXTI_IRQn EXTI4_IRQn
#ifndef NVIC_PRIORITYGROUP_0
#define NVIC_PRIORITYGROUP_0         ((uint32_t)0x00000007) /*!< 0 bit  for pre-emption priority,
                                                                 4 bits for subpriority */
#define NVIC_PRIORITYGROUP_1         ((uint32_t)0x00000006) /*!< 1 bit  for pre-emption priority,
                                                                 3 bits for subpriority */
#define NVIC_PRIORITYGROUP_2         ((uint32_t)0x00000005) /*!< 2 bits for pre-emption priority,
                                                                 2 bits for subpriority */
#define NVIC_PRIORITYGROUP_3         ((uint32_t)0x00000004) /*!< 3 bits for pre-emption priority,
                                                                 1 bit  for subpriority */
#define NVIC_PRIORITYGROUP_4         ((uint32_t)0x00000003) /*!< 4 bits for pre-emption priority,
                                                                 0 bit  for subpriority */
#endif
/* USER CODE BEGIN Private defines */
//µ¥Î»Ãë
#define Minimum_Period     60
//#define Max_Period    120
#define Max_Period    5
#define Radar_frame_len    36

#define senddataport		10U			//STS_O1 SEND DATA PORT 
#define sendhtbtport		5U			//STS_O2 send heart beat port
#define cmdreplyport		13U			// presence sensor parameter change feedback data port

enum Work_Mode {
	Network_Mode =0,// Mode = 0, Network/Cloud control mode
	Wired_Mode,			// Mode = 1, Not used now
	Reed_Mode,			// Mode = 2, Reed Switch Mode or Hall Element
	Radar_Mode,			// Mode = 3, USART Radar mode
	Reed_Radar_Dual_Mode	// Mode = 4, Dual Mode of Reed and Radar
};

enum ReedSwitch_Status {
	ReedSwitch_Open = 0, 			// Door/ReedSwitch/Holl Element Open 
	ReedSwitch_Close = 1					// Close Status
};

enum Presence_Status {
	No_Occupancy = 0,			// Not Occupancy, or Not presence
	Occupancy	= 1					// Occupancy or Presence
};


#define KeYong     0
#define ZhanYong   1
#define Close    0
#define Open     1

enum End_Node_Status {
	Door_Open_No_Presence = 0,		//Door Open, No Occupancy
	Door_Open_Presence = 1,					//Door Open, Occupancy
	Door_Close_No_Presence =1, 			//Door Close, No Occupancy
	Door_Close_Presence =1,						//Door close, Occupancy
	Door_Open = 0,										// Door_open status Only
	Door_Close =1,										// Door_close Status only
	No_Presence = 0,									// Not Presence Only, no door status
	Presence =1											// Presence Only, no door status
};

enum senddataconfirmation {
	UnConfirmed = 0,					// LoRa unconfirmed data upload
	Confirmed 									// LoRa Confirmed data upload
};

enum puColor_define {
	Dark = 0,				// 000 = Dark Mode
	Green,				    // = 1, Green
	Red, 				    // = 2, Red
	Blue,					// = 3, Blue
	Yellow,				    // = 4, Yellow
	Pink,					// = 5, Pink
	Cyan,					// = 6, Cyan
	White,				    // = 7, White
	Red_Blue			    // = 8, Red/Blue Flashing
	
};
/* USER CODE END Private defines */

#ifdef __cplusplus
}
#endif

#endif /* __MAIN_H */

/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/