/**
  ******************************************************************************
  * @file    platform.h
  * @author  IMG SW Application Team
  * @brief   This file contains all the platform functions prototypes
  ******************************************************************************
  * @attention
  *
  * Copyright (c) 2021 STMicroelectronics.
  * All rights reserved.
  *
  * This software is licensed under terms that can be found in the LICENSE file
  * in the root directory of this software component.
  * If no LICENSE file comes with this software, it is provided AS-IS.
  *
  ******************************************************************************
  */

#ifndef _PLATFORM_H_
#define _PLATFORM_H_
#pragma once

#include <stdint.h>
#include <string.h>

typedef int32_t (*VL53L5CX_get_tick_Func)(void);
typedef int32_t (*VL53L5CX_write_Func)(uint16_t, uint16_t, uint8_t *, uint16_t);
typedef int32_t (*VL53L5CX_read_Func)(uint16_t, uint16_t, uint8_t *, uint16_t);

/**
 * @brief Structure VL53L5CX_Platform needs to be filled by the customer,
 * depending on his platform. At least, it contains the VL53L5CX I2C address.
 * Some additional fields can be added, as descriptors, or platform
 * dependencies. Anything added into this structure is visible into the platform
 * layer.
 */

typedef struct
{
	/* To be filled with customer's platform. At least an I2C address/descriptor
	 * needs to be added */
	/* Example for most standard platform : I2C address of sensor */
    uint16_t address;
    VL53L5CX_write_Func Write;
    VL53L5CX_read_Func Read;
    VL53L5CX_get_tick_Func GetTick;
} VL53L5CX_Platform;

/*
 * @brief The macro below is used to define the number of target per zone sent
 * through I2C. This value can be changed by user, in order to tune I2C
 * transaction, and also the total memory size (a lower number of target per
 * zone means a lower RAM usage).
 */
#ifndef VL53L5CX_NB_TARGET_PER_ZONE
#define 	VL53L5CX_NB_TARGET_PER_ZONE		(1U)
#endif

/*
 * @brief The macro below can be used to avoid data conversion into the driver.
 * By default there is a conversion between firmware and user data. Using this macro
 * allows to use the firmware format instead of user format. The firmware format allows
 * an increased precision.
 */

// #define 	VL53L5CX_USE_RAW_FORMAT

/*
 * @brief All macro below are used to configure the sensor output. User can
 * define some macros if he wants to disable selected output, in order to reduce
 * I2C access.
 */

// #define VL53L5CX_DISABLE_AMBIENT_PER_SPAD
// #define VL53L5CX_DISABLE_NB_SPADS_ENABLED
// #define VL53L5CX_DISABLE_NB_TARGET_DETECTED
// #define VL53L5CX_DISABLE_SIGNAL_PER_SPAD
// #define VL53L5CX_DISABLE_RANGE_SIGMA_MM
// #define VL53L5CX_DISABLE_DISTANCE_MM
// #define VL53L5CX_DISABLE_REFLECTANCE_PERCENT
// #define VL53L5CX_DISABLE_TARGET_STATUS
// #define VL53L5CX_DISABLE_MOTION_INDICATOR

/*
 * @brief The macro below can be changed to switch between little and big
 * endian. By default, VL53L5CX ULD works with little endian, but user can
 * choose big endian. Just use selected the wanted configuration using macro
 * PROCESSOR_LITTLE_ENDIAN.
 */

#define PROCESSOR_LITTLE_ENDIAN
#ifdef PROCESSOR_LITTLE_ENDIAN
  #define SWAP_UINT16(x) (x)
  #define SWAP_UINT32(x) (x)
#else
	#define SWAP_UINT16(x) (((x) >> 8) | ((x) << 8))
	#define SWAP_UINT32(x) (((x) >> 24) | (((x) & 0x00FF0000) >> 8) \
    | (((x) & 0x0000FF00) << 8) | ((x) << 24))
#endif


/**
 * @param (VL53L5CX_Platform*) p_platform : Pointer of VL53L5CX platform
 * structure.
 * @param (uint16_t) Address : I2C location of value to read.
 * @param (uint8_t) *p_values : Pointer of value to read.
 * @return (uint8_t) status : 0 if OK
 */

uint8_t VL53L5CX_RdByte(
		VL53L5CX_Platform *p_platform,
		uint16_t RegisterAdress,
		uint8_t *p_value);

/**
 * @brief Mandatory function used to write one single byte.
 * @param (VL53L5CX_Platform*) p_platform : Pointer of VL53L5CX platform
 * structure.
 * @param (uint16_t) Address : I2C location of value to read.
 * @param (uint8_t) value : Pointer of value to write.
 * @return (uint8_t) status : 0 if OK
 */

uint8_t VL53L5CX_WrByte(
		VL53L5CX_Platform *p_platform,
		uint16_t RegisterAdress,
		uint8_t value);

/**
 * @brief Mandatory function used to read multiples bytes.
 * @param (VL53L5CX_Platform*) p_platform : Pointer of VL53L5CX platform
 * structure.
 * @param (uint16_t) Address : I2C location of values to read.
 * @param (uint8_t) *p_values : Buffer of bytes to read.
 * @param (uint32_t) size : Size of *p_values buffer.
 * @return (uint8_t) status : 0 if OK
 */

uint8_t VL53L5CX_RdMulti(
		VL53L5CX_Platform *p_platform,
		uint16_t RegisterAdress,
		uint8_t *p_values,
		uint32_t size);

/**
 * @brief Mandatory function used to write multiples bytes.
 * @param (VL53L5CX_Platform*) p_platform : Pointer of VL53L5CX platform
 * structure.
 * @param (uint16_t) Address : I2C location of values to write.
 * @param (uint8_t) *p_values : Buffer of bytes to write.
 * @param (uint32_t) size : Size of *p_values buffer.
 * @return (uint8_t) status : 0 if OK
 */

uint8_t VL53L5CX_WrMulti(
		VL53L5CX_Platform *p_platform,
		uint16_t RegisterAdress,
		uint8_t *p_values,
		uint32_t size);

/**
 * @brief Mandatory function, used to swap a buffer. The buffer size is always a
 * multiple of 4 (4, 8, 12, 16, ...).
 * @param (uint8_t*) buffer : Buffer to swap, generally uint32_t
 * @param (uint16_t) size : Buffer size to swap
 */

void VL53L5CX_SwapBuffer(
    uint8_t     *buffer,
    uint16_t     size);

/**
 * @brief Mandatory function, used to wait during an amount of time. It must be
 * filled as it's used into the API.
 * @param (VL53L5CX_Platform*) p_platform : Pointer of VL53L5CX platform
 * structure.
 * @param (uint32_t) TimeMs : Time to wait in ms.
 * @return (uint8_t) status : 0 if wait is finished.
 */

uint8_t VL53L5CX_WaitMs(
		VL53L5CX_Platform *p_platform,
		uint32_t TimeMs);

#endif	// _PLATFORM_H_