STS_O5

Go to file

Yunhorn e4c93d15d7 add bin hex		2024-05-30 17:02:09 +08:00
Core	---------- START OF BRANCH JP	2024-05-30 16:25:58 +08:00
LoRaWAN	REVISED HALL1/HALL2 DIAGRAM	2024-04-13 18:02:29 +08:00
STM32CubeIDE	add bin hex	2024-05-30 17:02:09 +08:00
.gitignore	add good bin file	2024-04-13 18:08:43 +08:00
README.md	restart from 2uA point	2024-04-13 16:29:56 +08:00
YUNHORN_IOT_CORE_STS_RM_2_1.pdf	initial for STS_O5	2024-04-13 14:45:06 +08:00
YUNHORN_IOT_STS_RM_2_1.PcbDoc	initial for STS_O5	2024-04-13 14:45:06 +08:00
readme.txt	good so far with 2uA HALL1 and HALL2	2024-04-13 18:04:40 +08:00

README.md

Pre-defines

TOF_1 , U3, RIGHT SENSOR, XSHUT:PB-3, INT:PB-5

TOF_2 , U4, LEFT SENSOR, XSHUT:PA-9,INT:PB-5 *** Default TOF ON BOARD

TOF_3 , P6,P7,P10 out interface, XSHUT:PA-10,INT:PB-5

SOAP_LEVEL_SENSOR, Switch/XSHUT: PB-3, INPUT-STATUS: PA-10

ROCTEC_R5, for upload payload format with distance only, 2 bytes

LED_ONBOARD, If LED soldered on board

Description

STS_R1 STS_R2 STS_R5 For

| STS-R1    | Jumbo Roll Level   |    TOF VL53L0X   |
 | STS-R2 | Tissue Paper Level   |    TOF VL53L0X   |
| STS-R5 | Waste Bin Level    |    TOF VL53L0X   |

STS-R5 # Waste Bin Level RocTec | TOF VL53L0X |

| STS-O2 | Presence Sensor    |  TOF VL53L1/L3   |
| STS-O3 | Presence Sensor    |  TOF VL53L1/L3   |
| STS-O4 | Urinal Occupy Sensor  |  TOF VL53L1/L3   |
| STS-O5 | Door Contact    |  GPIO ReedSwitch  |

| STS-R3 | Soap Dispenser Sensor  |    GPIO Capacitive   |
| STS-R4 | Cistern/Tank Level Sensor |    UART UltraSonic   |

| STS-M1 | Water Leakage Sensor  |    GPIO ReedSwitch   |
| STS-M3 | Tank Level Sensor   |    UART UltraSonic   |
| STS-M4    |   Water Flow Sensor           |    TIM2_ETR counting, PA5 |    


| STS-P1 | Queueing length Sensor  |    IW6843     |
| STS-P2 | Bi-Directional People Count |    TOF VL53L1/L3   |

| STS-M7 | Vibration Sensor   |    I2C 3-Axis vibration |

Jumbo Roll, Tissue Paper, Waste Bin sensor, door contact sensor

CHANGELOG: 2024-04-13 restart from 2uA point