sundp
/
xx_retired_Yunhorn_STS_MM
Archived
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
This repository has been archived on 2023-06-05. You can view files and clone it, but cannot push or open issues or pull requests.
15 Commits 1 Branch 0 Tags 11 MiB
HTML 61.5%
C 20.1%
Makefile 16.8%
Assembly 1.6%
Go to file
YunHorn Technology e53bdf7245 renew lora_app 2022-10-19 18:55:37 +08:00
Core renew lora_app 2022-10-19 18:55:37 +08:00
EWARM M7-0920 2022-09-20 11:49:19 +08:00
LoRaWAN renew lora_app 2022-10-19 18:55:37 +08:00
MDK-ARM renew lora_app 2022-10-19 18:55:37 +08:00
STM32CubeIDE renew lora_app 2022-10-19 18:55:37 +08:00
.extSettings 更新 '.extSettings' 2022-09-21 08:15:56 +08:00
.gitignore ignore file change 2022-09-21 08:12:07 +08:00
desktop.ini renew lora_app 2022-10-19 18:55:37 +08:00
readme.txt renew lora_app 2022-10-19 18:55:37 +08:00

readme.txt 

/**
  *******************************************************************************
  * @file    Vibration Sensor for Consumer Product Detection and                *
  *            Industry Level Machine Fault Analysis                            *
  * @author  Yunhorn (r) Technology Limited Application Team	                *
  * @brief   Yunhorn (r) SmarToilets (r) Product configuration file.			*
  *******************************************************************************
  * @attention
  *
  * Copyright (c) 2022 Yunhorn Technology Limited.
  * Copyright (c) 2022 Shenzhen Yunhorn Technology Co., Ltd.
  * All rights reserved.
  *
  * This software is licensed under terms that can be found in the LICENSE file
  * in the root directory of this software component.
  * If no LICENSE file comes with this software, it is provided AS-IS.
  *
  ******************************************************************************
  */

============  STM32WL E5CCUX =======================================
BUT1_PIN 	PA.0        MEMS-INT1
BUT2_PIN 	PA.1        MEMS-INT2

#define BUT1_Pin GPIO_PIN_0					//MEMS-INT1-ACTIVITY-NO-ACTIVITY INT
#define BUT1_GPIO_Port GPIOA
#define BUT1_EXTI_IRQn EXTI0_IRQn

#define BUT2_Pin GPIO_PIN_1					//MEMS-INT2- NOT USED
#define BUT2_GPIO_Port GPIOA
#define BUT2_EXTI_IRQn EXTI1_IRQn

-----   I2C1   --------------------------------------
SCL              PB.06  
SDA              PB.07  

-----   I2C2   --------------------------------------
SCL              PA.12  
SDA              PA.11  


EN-3V3			PB.04

============  STM32WL E5CCUX =======================================





============  STM32WL 55  ========================================
BUT1_PIN 	PA.0        CN10 Pin nbr 1   [PC.13 CN7 Pin nbr 23]
BUT2_PIN 	PA.1        CN10 Pin nbr 36
BUT3_PIN 	PC.6        CN10 Pin nbr 12   ////  ADXL345-INT2

#define BUT1_Pin GPIO_PIN_0
#define BUT1_GPIO_Port GPIOA
#define BUT1_EXTI_IRQn EXTI0_IRQn

#define BUT3_Pin GPIO_PIN_6
#define BUT3_GPIO_Port GPIOC
#define BUT3_EXTI_IRQn EXTI9_5_IRQn

#define BUT2_Pin GPIO_PIN_1
#define BUT2_GPIO_Port GPIOA
#define BUT2_EXTI_IRQn EXTI1_IRQn
============  STM32WL 55  ========================================

============ STM32WL55JC confirmed =============

===================================

GNG             GND=== CN7 PIN 20
VCC              3.3  ====CN7 PIN 16
===================================
SSD 1306        STM32WL55JC
-----   I2C1   --------------------------------------
SCL              PB.08  ===      CN10 pin 27 
SDA              PB.07  ===       CN10 pin 37

-----   I2C2   --------------------------------------
SCL              PA.12  ===          CN10 pin 3 
SDA              PA.15  ===          CN7  pin 17

-----   I2C3   --------------------------------------
SCL               PB.13  ===          CN7  pin 38
SDA               PB.4   ===          CN7  pin 34

--------------------SPI	  STM32WL55JC
--------------------SPI1  -------------------------------
CLK                 PA.05 ====   CN10 pin 11

MISO                PA.06 ====-  CN10 pin 13

MOSI                PA.07 ====   CN10 pin 15
=======================================


===================================

===================================

/*!
 * LoRaWAN Adaptive Data Rate
 * @note Please note that when ADR is enabled the end-device should be static
 */
#define LORAWAN_ADR_STATE                           LORAMAC_HANDLER_ADR_OFF //LORAMAC_HANDLER_ADR_ON


===========================================================================================================
sys_sensor.c


Application/User/LoRaWAN/App
===========================================================================================================
LORA_APP.H
===/* Region ------------------------------------*/
//#define ACTIVE_REGION                               LORAMAC_REGION_EU868
#define ACTIVE_REGION                               LORAMAC_REGION_AS923

//#define LORAWAN_USER_APP_PORT                       2
#define LORAWAN_USER_APP_PORT                       11


/*!
 * Defines the application data transmission duty cycle. 10s, value in [ms].
 */
#define APP_TX_DUTYCYCLE                            60000

===========================================================================================================
/LoRaWAN/App/lora_info.c                                    
lorawan_conf.h

===========================================================================================================
/* Region ------------------------------------*/
/* the region listed here will be linked in the MW code */
/* the application (on sys_conf.h) shall just configure one region at the time */
/*#define REGION_AS923*/
/*#define REGION_AU915*/
/*#define REGION_CN470*/
/*#define REGION_CN779*/
/*#define REGION_EU433*/
#define REGION_EU868
/*#define REGION_KR920*/
/*#define REGION_IN865*/
#define REGION_US915
/*#define REGION_RU864*/
===========================================================================================================

/*    SmarToilets Products  */