add MEMS not installed error in seft function testing report S....X

Core/Inc/yunhorn_sts_sensors.h

@@ -421,6 +421,7 @@ void STS_MOTION_SENSOR_Power_OFF(void);
 void STS_SENSOR_Upload_Config_Invalid_Message(void);
 void STS_SENSOR_Upload_Message(uint8_t appDataPort, uint8_t appBufferSize, char *appDataBuffer);
 void STS_SENSOR_Auto_Responder_Process(uint8_t tlv_ver,uint8_t tlv_type, uint8_t tlv_length, uint8_t *tlv_content);
+uint8_t STS_SENSOR_MEMS_Get_ID(uint8_t *devID);
 
 void STS_M7_GetValue(void);
 void STS_M7_SineWaveTest(uint16_t cycles);

Core/Src/yunhorn_sts_motion_sensor.c

@@ -414,6 +414,20 @@ void STS_MOTION_SENSOR_Disable_Wake_Up_Detection(void)
 	// DISABLE Activity and In-Activity detection
 	ADXL345_SetRegisterValue(ADXL345_REG_ACT_INACT_CTL, 0x00);
 	
+}
+uint8_t STS_SENSOR_MEMS_Get_ID(uint8_t *devID)
+{
+	uint8_t scanned_id = 0x00;
+#ifdef    YUNHORN_STS_M7_ENABLED
+	scanned_id = ADXL345_GetDeviceIDValue();
+	*devID = scanned_id;
+	if (scanned_id == ADXL345_ID) {
+		return *devID;
+	}	else {
+	return 0x00;
+	}
+#endif
+	
 }
 
 void STS_SENSOR_Power_ON(uint8_t cnt)

LoRaWAN/App/lora_app.c

@@ -1496,10 +1496,7 @@ void OnRestoreSTSCFGContextProcess(void)
 void STS_SENSOR_Function_Test_Process(void)
 {
 	char outbuf[32] =""; uint8_t i=0, count=10;
-	int16_t self_test_result[9]={0,0,0,0, 0,0,0, 0,0};
-	
-#ifdef YUNHORN_STS_M7_ENABLED
-	STS_MOTION_SENSOR_Function_Test_Process(&self_test_result[0], count);
+  uint8_t i2c_Slave_Dev_ID = 0x00;
 	
 	outbuf[i++] = (uint8_t) 'S';
 	outbuf[i++] = (uint8_t) sts_mtmcode1;
@@ -1508,6 +1505,15 @@ void STS_SENSOR_Function_Test_Process(void)
 	outbuf[i++] = (uint8_t) sts_hardware_ver;
 	outbuf[i++] = (uint8_t) (99*((GetBatteryLevel()/254)&0xff));					
 	
+	if (STS_SENSOR_MEMS_Get_ID(&i2c_Slave_Dev_ID) == 0x00) {
+    outbuf[i++] = (uint8_t) 'X'; // Slave MEMS Not Avaliable	
+	}	else 
+	{
+#ifdef YUNHORN_STS_M7_ENABLED
+	int16_t self_test_result[9]={0,0,0,0, 0,0,0, 0,0};	
+	
+	STS_MOTION_SENSOR_Function_Test_Process(&self_test_result[0], count);	
+	
 	outbuf[i++] = (uint8_t) (self_test_result[0]>>8)&0xff;
 	outbuf[i++] = (uint8_t) (self_test_result[0])&0xff;
 	
@@ -1534,11 +1540,10 @@ void STS_SENSOR_Function_Test_Process(void)
 	
 	outbuf[i++] = (uint8_t) (self_test_result[8]>>8)&0xff;
 	outbuf[i++] = (uint8_t) (self_test_result[8])&0xff;
+#endif
 
+	}
 	
 	STS_SENSOR_Upload_Message(LORAWAN_USER_APP_CTRL_REPLY_PORT, i, outbuf);
 	
-#endif
-	
-	
 }

desktop.ini

@@ -1,5 +1,5 @@
 [.ShellClassInfo]
-IconResource=C:\WINDOWS\System32\SHELL32.dll,176
+IconResource=C:\WINDOWS\System32\SHELL32.dll,88
 [ViewState]
 Mode=
 Vid=