sundp
/
xx_retired_r2_STS_MM_M7
Archived
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
This repository has been archived on 2023-06-05. You can view files and clone it, but cannot push or open issues or pull requests.
22 Commits 1 Branch 0 Tags 5.2 MiB
C 63.1%
Makefile 31.1%
Assembly 5.6%
Objective-C 0.2%
Go to file
Yunhorn c4bc2911c4 add MEMS not installed error in seft function testing report S....X 2022-10-30 13:27:30 +08:00
Core add MEMS not installed error in seft function testing report S....X 2022-10-30 13:27:30 +08:00
EWARM M7-0920 2022-09-20 11:49:19 +08:00
LoRaWAN add MEMS not installed error in seft function testing report S....X 2022-10-30 13:27:30 +08:00
MDK-ARM add MEMS not installed error in seft function testing report S....X 2022-10-30 13:27:30 +08:00
STM32CubeIDE renew for cfg 2022-10-26 23:30:00 +08:00
.extSettings 更新 '.extSettings' 2022-09-21 08:15:56 +08:00
.gitignore ignore file change 2022-09-21 08:12:07 +08:00
desktop.ini add MEMS not installed error in seft function testing report S....X 2022-10-30 13:27:30 +08:00
readme.md update responder 2022-10-22 18:17:10 +08:00
readme.txt renew lora_app 2022-10-19 18:55:37 +08:00

readme.md

/**

  • @file Vibration Sensor for Consumer Product Detection and *
  •        Industry Level Machine Fault Analysis                            *
  • @author Yunhorn (r) Technology Limited Application Team *
  • @brief Yunhorn (r) SmarToilets (r) Product configuration file. *
  • @attention
  • Copyright (c) 2022 Yunhorn Technology Limited.
  • Copyright (c) 2022 Shenzhen Yunhorn Technology Co., Ltd.
  • All rights reserved.
  • This software is licensed under terms that can be found in the LICENSE file
  • in the root directory of this software component.
  • If no LICENSE file comes with this software, it is provided AS-IS.

*/

============ STM32WL E5CCUX ======================================= BUT1_PIN PA.0 MEMS-INT1 BUT2_PIN PA.1 MEMS-INT2

#define BUT1_Pin GPIO_PIN_0 //MEMS-INT1-ACTIVITY-NO-ACTIVITY INT #define BUT1_GPIO_Port GPIOA #define BUT1_EXTI_IRQn EXTI0_IRQn

#define BUT2_Pin GPIO_PIN_1 //MEMS-INT2- NOT USED #define BUT2_GPIO_Port GPIOA #define BUT2_EXTI_IRQn EXTI1_IRQn

----- I2C1 -------------------------------------- SCL PB.06
SDA PB.07

----- I2C2 -------------------------------------- SCL PA.12
SDA PA.11

EN-3V3 PB.04

============ STM32WL E5CCUX =======================================

============ STM32WL 55 ======================================== BUT1_PIN PA.0 CN10 Pin nbr 1 [PC.13 CN7 Pin nbr 23] BUT2_PIN PA.1 CN10 Pin nbr 36 BUT3_PIN PC.6 CN10 Pin nbr 12 //// ADXL345-INT2

#define BUT1_Pin GPIO_PIN_0 #define BUT1_GPIO_Port GPIOA #define BUT1_EXTI_IRQn EXTI0_IRQn

#define BUT3_Pin GPIO_PIN_6 #define BUT3_GPIO_Port GPIOC #define BUT3_EXTI_IRQn EXTI9_5_IRQn

#define BUT2_Pin GPIO_PIN_1 #define BUT2_GPIO_Port GPIOA #define BUT2_EXTI_IRQn EXTI1_IRQn ============ STM32WL 55 ========================================

============ STM32WL55JC confirmed =============

===================================

GNG GND=== CN7 PIN 20 VCC 3.3 ====CN7 PIN 16

SSD 1306 STM32WL55JC ----- I2C1 -------------------------------------- SCL PB.08 === CN10 pin 27 SDA PB.07 === CN10 pin 37

----- I2C2 -------------------------------------- SCL PA.12 === CN10 pin 3 SDA PA.15 === CN7 pin 17

----- I2C3 -------------------------------------- SCL PB.13 === CN7 pin 38 SDA PB.4 === CN7 pin 34

--------------------SPI STM32WL55JC --------------------SPI1 ------------------------------- CLK PA.05 ==== CN10 pin 11

MISO PA.06 ====- CN10 pin 13

MOSI PA.07 ==== CN10 pin 15

===================================

===================================

/*!

  • LoRaWAN Adaptive Data Rate
  • @note Please note that when ADR is enabled the end-device should be static */ #define LORAWAN_ADR_STATE LORAMAC_HANDLER_ADR_OFF //LORAMAC_HANDLER_ADR_ON

=========================================================================================================== sys_sensor.c

Application/User/LoRaWAN/App

LORA_APP.H ===/* Region ------------------------------------*/ //#define ACTIVE_REGION LORAMAC_REGION_EU868 #define ACTIVE_REGION LORAMAC_REGION_AS923

//#define LORAWAN_USER_APP_PORT 2 #define LORAWAN_USER_APP_PORT 11

/*!

  • Defines the application data transmission duty cycle. 10s, value in [ms]. */ #define APP_TX_DUTYCYCLE 60000

=========================================================================================================== /LoRaWAN/App/lora_info.c
lorawan_conf.h

=========================================================================================================== /* Region ------------------------------------/ / the region listed here will be linked in the MW code / / the application (on sys_conf.h) shall just configure one region at the time / /#define REGION_AS923*/ /#define REGION_AU915/ /#define REGION_CN470/ /#define REGION_CN779/ /#define REGION_EU433/ #define REGION_EU868 /#define REGION_KR920/ /#define REGION_IN865/ #define REGION_US915 /#define REGION_RU864/

/* SmarToilets Products */